cvapCodecConfigDtmfRelay
CISCO-VOICE-AALX-PROFILE-MIB ·
.1.3.6.1.4.1.9.9.323.1.1.2.1.10
Object
When this object is set to 'true', the digits will be
sent as peer-to-peer packet in the bearer.
When this object is set to 'false', the digits will be
sent as regular voice packets in the bearer.
For low complexity CODECS (such as G.711), the preferred
value for this object could be 'false'.
For high complexity CODECS (such as G.729A), the preferred
value for this object should be 'true', otherwise
the digits may not get recognized properly at the remote
end.
Context
- MIB
- CISCO-VOICE-AALX-PROFILE-MIB
- OID
.1.3.6.1.4.1.9.9.323.1.1.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cvapCodecConfigEntry
- Table
- cvapCodecConfigTable
- Siblings
- 11
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvapCodecConfigAdaptType An unique index identifying the adaptation layer
supported by voice applications in the media gateway.
The adaptation types include:
other :Voice over other media.
aal5 … | column | Enumeration | .1.3.6.1.4.1.9.9.323.1.1.2.1.1 |
| cvapCodecConfigPayloadType This object specifies the payload type of the CODEC in
voice application as specified in RFC1890.
The values (0..95) are static payload type.
The values (96..127) a… | column | Unsigned32 | .1.3.6.1.4.1.9.9.323.1.1.2.1.11 |
| cvapCodecConfigNewJtrNomDelay This object specifies the nominal jitter buffer size.
If cvapCodecConfigJitterDelayMode is set to fixed(2),
the jitter buffer is fixed at this value for
the duratio… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.323.1.1.2.1.12 |
| cvapCodecConfigType This object specifies the CODEC rate defined in
CvcSpeechCoderRate. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate | .1.3.6.1.4.1.9.9.323.1.1.2.1.2 |
| cvapCodecConfigPreference This object specified the preference configured by the
user for each CODEC. Lower the number, higher the
preference of the CODEC.
If this object is set to 0, the corresponding COD… | column | Unsigned32 | .1.3.6.1.4.1.9.9.323.1.1.2.1.3 |
| cvapCodecConfigVoicePacketPeriod This object specifies the packetization period for a
particular CODEC in voice application.
The packetization period represents the time for the
media gateway to collect the dat… | column | microseconds CiscoCodecPacketPeriod | .1.3.6.1.4.1.9.9.323.1.1.2.1.4 |
| cvapCodecConfigVbdPacketPeriod deprecated This object specifies the packetization period for a
particular CODEC in VBD (Voice Band Data) upspeed.
The packetization period represents the time for the
media gateway to col… | column | microseconds CiscoCodecPacketPeriod | .1.3.6.1.4.1.9.9.323.1.1.2.1.5 |
| cvapCodecConfigJitterDelayMode The object specifies the jitter buffer mode applied to
a call connection.
adaptive - means to use cvapCodecConfigNewJtrNomDelay as
the initial jitter bu… | column | CISCO-MEDIA-GATEWAY-MIBCCallControlJitterDelayMode | .1.3.6.1.4.1.9.9.323.1.1.2.1.6 |
| cvapCodecConfigJitterMaxDelay This object specifies the maximum jitter buffer size.
If cvapCodecConfigJitterDelayMode is set to adaptive(1),
the DSP will dynamically pick an optimal value of the… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.323.1.1.2.1.7 |
| cvapCodecConfigJitterNomDelay deprecated This object specifies the nominal jitter buffer size.
If cvapCodecConfigJitterDelayMode is set to fixed(2),
the jitter buffer is fixed at this value for
the duratio… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.323.1.1.2.1.8 |
| cvapCodecConfigJitterMinDelay This object specifies the minimum jitter buffer size.
If cvapCodecConfigJitterDelayMode is set to adaptive(1),
the DSP will dynamically pick an optimal value of the… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.323.1.1.2.1.9 |