vismERL
CISCO-VISM-MODULE-MIB ·
.1.3.6.1.4.1.351.110.3.17.3.4
Object
scalar
r/w
Enumeration
This object is used to provision the return echo lost, i.e the db loss of the echo that the DSPs are supposed to cancel.
Context
- MIB
- CISCO-VISM-MODULE-MIB
- OID
.1.3.6.1.4.1.351.110.3.17.3.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- vismDspGrp
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | zerodb |
2 | threedb |
3 | sixdb |
4 | worstdb |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vismEcanCnfIdlePattern deprecated Echo Canceller pattern for Idle code.
Mu-Law : 1 - 7f, 2 - ff, 3 - 7f or ff, 4 - f7
A-Law : 1 - None, 2 - 54, 3 - 55, 4 - Programmable Idle code.
DEFVAL : 'pattern3' (7f or ff)… | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.17.3.1 |
| vismPayloadType This object specifies the payload type to be used when
fax upspeed happens.
IANA values (0..95) are static payload and (96..127) are
dynamic payload type.
Th… | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.17.3.10 |
| vismDSPHeartbeat This object will specify the timer interval, DSP send
a regular heartbeat messages from the DSP to the HOST
Application.
If the value is zero the Heartbeat message will… | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.17.3.11 |
| vismFaxDeJitterMode This object specifies the de-jitter mode to
be used for the fax upspeed.
This object is applicable only in the case of
VoIP applications. | scalar | VismFaxDeJitterMode | .1.3.6.1.4.1.351.110.3.17.3.12 |
| vismFaxDeJitterInitialDelay This object defines the de-jitter buffer size
for fax upspeed. If the vismFaxDeJitter Mode is
set to be 'fixedWithTS' or 'fixedWithoutTS', the jitter
buffer size is set to this … | scalar | VismFaxDeJitterInitDelay | .1.3.6.1.4.1.351.110.3.17.3.13 |
| vismEcanCnfIdleDirection deprecated Echo Canceller Idle Direction. This determines in
which direction the Idle code must be present. | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.17.3.2 |
| vismCompCnfPacketSize Compressed output packet size - This value is used in the
DSP(Digital Signal Processing) interface API commands
to configure the DSPs for the maximum packet size.
The valid values… | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.17.3.3 |
| vismJitterDelayMode deprecated This object is used to provision the jitter buffer mode
to be apply to a call connection.
The possible values are:
'fixed' : means use a constant jitter buffer size, which
… | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.17.3.5 |
| vismJitterInitialDelay deprecated Defines the jitter buffer size. If the vismJitterDelayMode
is set to be fixed, the jitter buffer is fixed at this
value for the call. If vismJitterDelayMode is adaptive,
this is… | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.17.3.6 |
| vismAdaptiveGainControl If set to 'on', the DSP will adjust the gain of the
call connection to an optimal value. | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.17.3.7 |
| vismDspHealth This attribute indicates the health of the DSPs.
It is a percentage of the total number of DSPs
that are currently functional. | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.17.3.8 |
| vismUpspeedCodec This object specifies the codec to be used when
fax upspeed happens.
The default value for this object is 'g711u' when
the line type is T1 and 'g711a' when the line
ty… | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.17.3.9 |