virtualNwIfType
CISCO-VIRTUAL-NW-IF-MIB ·
.1.3.6.1.4.1.9.9.290.1.1.1.1.1
Object
column
Enumeration
If the virtualNwIfType is vsan(1) and if the
corresponding virtual interface is enabled
( ifAdminStatus='up' ), then the operational state of
virtual interface will become active
( ifOperStatus='up' ) only if the VSAN state is active
and a FCID is obtained through a successful FLOGI.
Even if the desired state of the virtual interface is
enabled ( ifAdminStatus='up' ), but if the VSAN state is
non-active or FCID has not been obtained, then the
virtual interface is disabled(ifOperStatus='down').
Only when the VSAN state becomes active and an FCID is
obtained will the virtual interface be enabled
( ifOperStatus='up' ). An interface can be disabled while
its VSAN exists by setting ifAdminStatus='down'. When
an VSAN is deleted, the corresponding interface
( if created ) is also deleted.
If the virtualNwIfType is vlan(2) and if the
corresponding virtual interface is enabled
( ifAdminStatus='up' ) , then the virtual interface will
become active ( ifOperStatus='up' ) only if the VLAN
state is active. Even if the desired state of the
virtual interface is enabled(ifAdminStatus='up'), but if
the VLAN state is non-active, then the virtual interface
is disabled ( ifOperStatus='down' ) . Only when the VLAN
state becomes active will the virtual interface be
enabled ( ifOperStatus='up' ). An interface can be
disabled while its VLAN exists by setting
ifAdminStatus='down'. When an VLAN is deleted, the
corresponding interface ( if created ) is also deleted.
Context
- MIB
- CISCO-VIRTUAL-NW-IF-MIB
- OID
.1.3.6.1.4.1.9.9.290.1.1.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- virtualNwIfEntry
- Table
- virtualNwIfTable
- Siblings
- 6
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | vsan |
2 | vlan |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| virtualNwIfId The id of VSAN or VLAN, according to the value of
virtualNwIfType. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.290.1.1.1.1.2 |
| virtualNwIfIndex The ifIndex of this interface. This value is
dynamically assigned by the agent. It is valid
whenever the value of the corresponding
virtualNwIfRowStatus is 'active'.
The ifType … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.290.1.1.1.1.3 |
| virtualNwIfFcId The Fibre Channel Identifier(FC-ID) of this interface.
This object is relevant to interfaces with
'virtualNwIfType' of vsan(1) only. | column | CISCO-ST-TCFcAddressId | .1.3.6.1.4.1.9.9.290.1.1.1.1.4 |
| virtualNwIfOperStatusCause The cause of current operational state of the interface.
'none(1)' - no failure.
'adminDown(2)' - 'ifAdminStatus' is down(2).
'vsanNotOperational(3) - VSAN no… | column | Enumeration | .1.3.6.1.4.1.9.9.290.1.1.1.1.5 |
| virtualNwIfOperStatusCauseDescr The description for the cause of current operational
state of the interface, shown by the object
'virtualNwIfOperStatusCause'. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.290.1.1.1.1.6 |
| virtualNwIfRowStatus The status of this conceptual row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.290.1.1.1.1.7 |