ciscoTsStackSwitchSPANMonitoredTrCRFs
CISCO-TS-STACK-MIB ·
.1.3.6.1.4.1.9.5.32.2.1.1.29
Object
column
mandatory
r/w
OctetString
Token Ring Concentrator Facilities (TrCRFs) for which
traffic on the port specified by
ciscoTsStackSwitchSPANMonitoredPort should be monitored.
Individual TrCRFs can be selected for monitoring only
on trunk ports.
Each octet within the value of this object
specifies a set of eight TrCRFs, with the first
octet specifying TrCRFs 1 through 8, the second
octet specifying TrCRFs 9 through 16, etc.
Within each octet, the most significant bit
represents the lowest numbered TrCRF, and the
least significant bit represents the highest
numbered TrCRF. Thus, each TrCRF of the stack
is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that TrCRF is included in the set of
TrCRFs for which traffic should be monitored ;
the TrCRF is not included if its bit has a value of '0'.
The default is all zeros.
Get requests for this object will return all zeros
if ciscoTsStackSwitchSPANMonitoredPort specifies a
non-trunk port. Set requests for this object will
be rejected with a 'badValue' error if
ciscoTsStackSwitchSPANMonitoredPort specifies a
non-trunk port.
Context
- MIB
- CISCO-TS-STACK-MIB
- OID
.1.3.6.1.4.1.9.5.32.2.1.1.29- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ciscoTsStackEntry
- Table
- ciscoTsStackTable
- Siblings
- 28
Syntax
OctetString
Values & Constraints
Object Constraints
range: 128-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoTsStackSwitchNumber mandatory Switch number as determined by the port number
that the switch is connected to in a Matrix or as
determined by the Stack Management software when two
switches are connected back… | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.1 |
| ciscoTsStackSwitchSPANPort mandatory Port number to be used for the Switch Port Analyzer.
Setting this object to zero turns off the SPAN function. | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.10 |
| ciscoTsStackSwitchSPANMonitoredPort mandatory Port monitored by the SPAN function. | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.11 |
| ciscoTsStackSwitchFeatureStatus mandatory This object indicates whether the switch is enabled
to support enhanced features. | column | Enumeration | .1.3.6.1.4.1.9.5.32.2.1.1.12 |
| ciscoTsStackSwitchFeatureKey mandatory Feature key to enable enhanced features. See the
manual for information pertaining to enabling possible
enhanced features. | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.13 |
| ciscoTsStackSwitchPorts mandatory A bit mask representing all the ports present in this
switch. Each octet within the value of this object
specifies a set of eight ports, with the first octet
specifying ports 1 … | column | OctetString | .1.3.6.1.4.1.9.5.32.2.1.1.14 |
| ciscoTsStackSwitchAgingTime mandatory Aging time in minutes for the master address table entries
on this switch. | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.15 |
| ciscoTsStackSwitchAgingLevel mandatory Threshold to demand age the master address table. All
numbers refer to percentage of the address table. The
only values accepted by the agent are 50,60,70,80,90
and 0. Setting the… | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.16 |
| ciscoTsStackSwitchXmitFrames mandatory Frames transmitted by the CPU. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.18 |
| ciscoTsStackSwitchRcvdFrames mandatory Frames received for processing by the CPU. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.19 |
| ciscoTsStackSwitchBIAddr mandatory The burned in MAC address of the switch. | column | MacAddr | .1.3.6.1.4.1.9.5.32.2.1.1.2 |
| ciscoTsStackSwitchRcvdErrFrames mandatory Error frames received by the CPU. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.20 |
| ciscoTsStackSwitchLostFrames mandatory Frames lost by the CPU while trying to transmit. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.21 |
| ciscoTsStackSwitchPendingSendRqsts mandatory Frames queued in the CPU's transmit buffer. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.22 |
| ciscoTsStackSwitchXmitErrFrames mandatory Frames in error due to buffer overflows or drops
in the CPU. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.23 |
| ciscoTsStackSwitchCurrActStations mandatory The number of station address entries currently active
in the switch. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.24 |
| ciscoTsStackSwitchLargestNumStations mandatory The largest number of active stations ever seen on the
switch since the last reboot, or clearing of statistics. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.25 |
| ciscoTsStackSwitchMaxAddressChain mandatory The longest chain of addresses anywhere in the CPU's
address hash table. | column | - | .1.3.6.1.4.1.9.5.32.2.1.1.26 |
| ciscoTsStackSwitchAddressTblFulls mandatory The number of times a hash table chain has filled up. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.5.32.2.1.1.27 |
| ciscoTsStackSwitchId mandatory The object ID used to uniquely identify the type of
Cisco token ring switch. | column | ObjectIdentifier | .1.3.6.1.4.1.9.5.32.2.1.1.28 |
| ciscoTsStackSwitchLAAddr mandatory The locally administered MAC address of the switch.
After writing to this object, you must reset the switch. | column | MacAddr | .1.3.6.1.4.1.9.5.32.2.1.1.3 |
| ciscoTsStackSwitchPwrSupplyStatus mandatory The status of the power supply of the switch. The values
have the following meanings:
unknown(1) :
The status is not known.
internal-only(2) :
The … | column | Enumeration | .1.3.6.1.4.1.9.5.32.2.1.1.30 |
| ciscoTsStackSwitchFwVersion mandatory Version number for the firmware running on the switch. | column | OctetString | .1.3.6.1.4.1.9.5.32.2.1.1.4 |
| ciscoTsStackSwitchHwVersion mandatory Hardware version number for the switch. | column | OctetString | .1.3.6.1.4.1.9.5.32.2.1.1.5 |
| ciscoTsStackSwitchUptime mandatory Time ticks since the switch was last reset. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.9.5.32.2.1.1.6 |
| ciscoTsStackSwitchStatus mandatory Operational status of the box. Setting this value
to either coldReset(2) or warmReset(3) will cause
cold start or warm start to occur after a predefined
time delay. | column | Enumeration | .1.3.6.1.4.1.9.5.32.2.1.1.7 |
| ciscoTsStackSwitchTemperature mandatory Temperature of each switch reported in degrees Celsius. | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.8 |
| ciscoTsStackSwitchMemory mandatory Installed memory on the switch in MB. | column | Integer32 | .1.3.6.1.4.1.9.5.32.2.1.1.9 |