ciscoTsStackSwitchPorts

CISCO-TS-STACK-MIB · .1.3.6.1.4.1.9.5.32.2.1.1.14
MIB view Table view

Object

column mandatory OctetString 
A bit mask representing all the ports present in this
switch. Each octet within the value of this object 
specifies a set of eight ports, with the first octet 
specifying ports 1 through 8, the second octet specifying 
ports 9 through 16, etc.  Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port.  Thus, each port of the
switch is represented by a single bit within the
value of this object.  If that bit has a value of
'1' then that port is included in the set of
ports in this switch; the port is not included in this
	switch if its bit has a value of '0'.

Context

MIB
CISCO-TS-STACK-MIB
OID
.1.3.6.1.4.1.9.5.32.2.1.1.14
Type
column
Access
readonly
Status
mandatory
Parent
ciscoTsStackEntry
Table
ciscoTsStackTable
Siblings
28

Syntax

OctetString

Values & Constraints

Object Constraints
range: 4-4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ciscoTsStackSwitchNumber mandatory
Switch number as determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back…
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.1
ciscoTsStackSwitchSPANPort mandatory
Port number to be used for the Switch Port Analyzer. Setting this object to zero turns off the SPAN function.
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.10
ciscoTsStackSwitchSPANMonitoredPort mandatory
Port monitored by the SPAN function.
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.11
ciscoTsStackSwitchFeatureStatus mandatory
This object indicates whether the switch is enabled to support enhanced features.
columnEnumeration.1.3.6.1.4.1.9.5.32.2.1.1.12
ciscoTsStackSwitchFeatureKey mandatory
Feature key to enable enhanced features. See the manual for information pertaining to enabling possible enhanced features.
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.13
ciscoTsStackSwitchAgingTime mandatory
Aging time in minutes for the master address table entries on this switch.
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.15
ciscoTsStackSwitchAgingLevel mandatory
Threshold to demand age the master address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 and 0. Setting the…
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.16
ciscoTsStackSwitchXmitFrames mandatory
Frames transmitted by the CPU.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.18
ciscoTsStackSwitchRcvdFrames mandatory
Frames received for processing by the CPU.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.19
ciscoTsStackSwitchBIAddr mandatory
The burned in MAC address of the switch.
columnMacAddr.1.3.6.1.4.1.9.5.32.2.1.1.2
ciscoTsStackSwitchRcvdErrFrames mandatory
Error frames received by the CPU.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.20
ciscoTsStackSwitchLostFrames mandatory
Frames lost by the CPU while trying to transmit.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.21
ciscoTsStackSwitchPendingSendRqsts mandatory
Frames queued in the CPU's transmit buffer.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.22
ciscoTsStackSwitchXmitErrFrames mandatory
Frames in error due to buffer overflows or drops in the CPU.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.23
ciscoTsStackSwitchCurrActStations mandatory
The number of station address entries currently active in the switch.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.24
ciscoTsStackSwitchLargestNumStations mandatory
The largest number of active stations ever seen on the switch since the last reboot, or clearing of statistics.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.25
ciscoTsStackSwitchMaxAddressChain mandatory
The longest chain of addresses anywhere in the CPU's address hash table.
column-.1.3.6.1.4.1.9.5.32.2.1.1.26
ciscoTsStackSwitchAddressTblFulls mandatory
The number of times a hash table chain has filled up.
columnRFC1155-SMICounter.1.3.6.1.4.1.9.5.32.2.1.1.27
ciscoTsStackSwitchId mandatory
The object ID used to uniquely identify the type of Cisco token ring switch.
columnObjectIdentifier.1.3.6.1.4.1.9.5.32.2.1.1.28
ciscoTsStackSwitchSPANMonitoredTrCRFs mandatory
Token Ring Concentrator Facilities (TrCRFs) for which traffic on the port specified by ciscoTsStackSwitchSPANMonitoredPort should be monitored. Individual TrCRFs can be selecte…
columnOctetString.1.3.6.1.4.1.9.5.32.2.1.1.29
ciscoTsStackSwitchLAAddr mandatory
The locally administered MAC address of the switch. After writing to this object, you must reset the switch.
columnMacAddr.1.3.6.1.4.1.9.5.32.2.1.1.3
ciscoTsStackSwitchPwrSupplyStatus mandatory
The status of the power supply of the switch. The values have the following meanings: unknown(1) : The status is not known. internal-only(2) : The …
columnEnumeration.1.3.6.1.4.1.9.5.32.2.1.1.30
ciscoTsStackSwitchFwVersion mandatory
Version number for the firmware running on the switch.
columnOctetString.1.3.6.1.4.1.9.5.32.2.1.1.4
ciscoTsStackSwitchHwVersion mandatory
Hardware version number for the switch.
columnOctetString.1.3.6.1.4.1.9.5.32.2.1.1.5
ciscoTsStackSwitchUptime mandatory
Time ticks since the switch was last reset.
columnRFC1155-SMITimeTicks.1.3.6.1.4.1.9.5.32.2.1.1.6
ciscoTsStackSwitchStatus mandatory
Operational status of the box. Setting this value to either coldReset(2) or warmReset(3) will cause cold start or warm start to occur after a predefined time delay.
columnEnumeration.1.3.6.1.4.1.9.5.32.2.1.1.7
ciscoTsStackSwitchTemperature mandatory
Temperature of each switch reported in degrees Celsius.
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.8
ciscoTsStackSwitchMemory mandatory
Installed memory on the switch in MB.
columnInteger32.1.3.6.1.4.1.9.5.32.2.1.1.9