ciscoTsMACDestFilterTable

CISCO-TS-STACK-MIB · .1.3.6.1.4.1.9.5.32.8.3

Object

table mandatory

A table of destination filters set up in the switch.
New filters are created by adding entries to this
table.  Note that values for all of the relevant objects
for a particular type of filter must be specified in a
single SNMP set operation on creation of a filter.  Set
operations which do not contain all of the required objects
for a given filter type will fail with an error-status
of 'genErr'.  The objects required for each filter type are
as follows:
          
ciscoTsMACDestFilterType   |   Required Objects for Creation
========================   |   =============================
block-dest(1)              |   ciscoTsMACDestFilterPorts
---------------------------|--------------------------------
allow-dest(2)              |   ciscoTsMACDestFilterPorts
---------------------------|--------------------------------
limited-multicast(3)       |   ciscoTsMACDestFilterPorts
                          |   ciscoTsMACDestFilterExitMask
---------------------------|--------------------------------
force-dest(4)              |   ciscoTsMACDestFilterPorts
                          |   ciscoTsMACDestFilterRemoteBox
                          |   ciscoTsMACDestFilterRemotePort 
          
Since the indices for the table are switch number, MAC
address, and filter type, the instance information for a given
object specifies which filter is being created.  For example,
a set request for
          
      ciscoTsMACDestFilterPorts.s.a1.a2.a3.a4.a5.a6.t
          
will create a filter of type 't' (as enumerated for
ciscoTsMACDestFilterType) for MAC address a1:a2:a3:a4:a5:a6
on switch number 's'.

Context

MIB: CISCO-TS-STACK-MIB
OID: .1.3.6.1.4.1.9.5.32.8.3
Type: table
Status: mandatory
Parent: ciscoTsFilter
Siblings: 5
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ciscoTsProtocolClassFilterTable mandatory DSAP and SNAP Filter Class table. This table is global for the entire stack.	table	-	`.1.3.6.1.4.1.9.5.32.8.1`
ciscoTsProtocolFilterTable mandatory DSAP and SNAP Filter table. This table allows you to assign protocol classes and settings for each port. There is one entry in the table for each protocol class which has been ena…	table	-	`.1.3.6.1.4.1.9.5.32.8.2`
ciscoTsMACSourceFilterTable mandatory A table of source filters set up in the switch. New filters are created by adding entries to this table. Note that values for all of the relevant objects for a particular type of…	table	-	`.1.3.6.1.4.1.9.5.32.8.4`
ciscoTsDupAddrFilterTable mandatory A table of MAC addresses that have been identified as duplicates within an address scope. There is one entry in the tale for each such address. Entries cannot be administrativel…	table	-	`.1.3.6.1.4.1.9.5.32.8.5`
ciscoTsTrunkProtocolFilterTable mandatory DSAP and SNAP Filter table for trunk ports which support protocol filters on a per-TrCRF basis. This table allows you to assign protocol classes and settings for each TrCRF on eac…	table	-	`.1.3.6.1.4.1.9.5.32.8.6`

Child Objects