cswmFlowQueryMask

CISCO-SWITCH-MULTICAST-MIB · .1.3.6.1.4.1.9.9.504.1.7.2.1.2

Object

column r/w Bits

This object is used to set up the query criteria for
the multicast flows of interest.  If any one of the
defined BITs is set, then the objects(s) corresponding
to the BITS in the same row instance will be used for 
the search.
              
Specifically, if the 'vrf' BIT is set, then the 
cswmFlowQueryMvrf object will be included in the
search criteria. The 'vrf' BIT can be set in 
combination with any other BIT for the search.
              
If the 'group' BIT is set, then the 
cswmFlowQueryGroup object will be used as the
search criteria.
              
If the 'groupmask' BIT is set, then the 
cswmFlowQueryGroup and cswmFlowQueryGroupMask objects 
will be used as the search criteria.
              
If the 'source' BIT is set, then the
cswmFlowQuerySource and cswmFlowQueryGroup objects 
will be used as the search criteria.
              
It is SNMP managers' responsibility to turn on certain
bits on in this object instance, if necessary,
and the corresponding flow parameter variables to the 
appropriate values in order to setup the desired
query criteria.

Context

MIB: CISCO-SWITCH-MULTICAST-MIB
OID: .1.3.6.1.4.1.9.9.504.1.7.2.1.2
Type: column
Access: readwrite
Status: current
Parent: cswmFlowQueryEntry
Table: cswmFlowQueryTable
Siblings: 16

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	vrf
`1`	group
`2`	groupmask
`3`	source

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cswmFlowQueryIndex An arbitrary integer in the range of 1 to cswmFlowMaxQueries to identify this control query.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.504.1.7.2.1.1`
cswmFlowQuerySkipNFlows The number of searched flows to be skipped before storing any multicast flows in cswmFlowResultTable, when the 'perFlow' bit is set in cswmFlowQueryType. This obje…	column	Integer32	`.1.3.6.1.4.1.9.9.504.1.7.2.1.10`
cswmFlowQueryTotalFlows The number of flows matching the query criteria. The value of this object will be zero when the 'perFlow' bit is set in cswmFlowQueryType.	column	Integer32	`.1.3.6.1.4.1.9.9.504.1.7.2.1.11`
cswmFlowMcastQueryRows Indicating the status of the query by following values: -1 - Either the query has not been started or the agent is still processing this query instance. It is the defaul…	column	Integer32	`.1.3.6.1.4.1.9.9.504.1.7.2.1.12`
cswmFlowMcastQueryMoreRows If the value of the object is true when there are more entries available matching this query criteria, than the ones returned in cswmFlowResultTable.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.504.1.7.2.1.13`
cswmFlowQueryOwner The manager entity that configured this entry and is therefore using the resources assigned to it. It is used to model an administratively assigned name of the owner of a resourc…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.504.1.7.2.1.14`
cswmFlowQueryCreateTime Time when this query was created.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.504.1.7.2.1.15`
cswmFlowQueryStorage The storage type for this conceptual row.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.9.9.504.1.7.2.1.16`
cswmFlowQueryStatus The status object used to manage rows in this table. When set to 'active', the query to search for l3 multicast flows is initiated. Once a row becomes active, values within the r…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.504.1.7.2.1.17`
cswmFlowQueryMvrf The human-readable name of the Multicast Virtual Private Network (MVPN) routing/forwarding instance (MVRF). When the 'mvrf' bit of cswmFlowQueryMask object in the same row is on,…	column	MPLS-VPN-MIBMplsVpnId	`.1.3.6.1.4.1.9.9.504.1.7.2.1.3`
cswmFlowQueryAddrType The Internet address type for this multicast search query.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.504.1.7.2.1.4`
cswmFlowQuerySource The source Internet address of the IP multicast layer 3 flows. When the 'source' BIT of cswmFlowQueryMask object in the same row is on, an appropriate value should be specified a…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.504.1.7.2.1.5`
cswmFlowQueryGroup The multicast group Internet address of the queried flows. When the 'group' or 'groupmask' bit of cswmFlowQueryMask object in the same row is on, an appropriate value should be …	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.504.1.7.2.1.6`
cswmFlowQueryGroupMask The length of the Prefix associated with cswmFlowQueryGroup. When the 'groupmask' bit of cswmFlowQueryMask object in the same row is on, an appropriate value should be specified …	column	INET-ADDRESS-MIBInetAddressPrefixLength	`.1.3.6.1.4.1.9.9.504.1.7.2.1.7`
cswmFlowQueryType This object is used to set up the query type for the multicast flows of interest. If the 'perFlow' BIT is set, then, the entries matching this query will be retur…	column	Bits	`.1.3.6.1.4.1.9.9.504.1.7.2.1.8`
cswmFlowQueryEntityIndex This object identifies the switching engine for which the query is issued. When the value of this object is 0, the query is performed on the switching engine of the…	column	CISCO-TCEntPhysicalIndexOrZero	`.1.3.6.1.4.1.9.9.504.1.7.2.1.9`