cSpMtp3T24
CISCO-SP-MIB ·
.1.3.6.1.4.1.9.10.73.1.1.34
Object
scalar
SNMPv2-SMIUnsigned32
Stabilizing timer after removal of local processor outage, used in LPO latching to RPO (national option)
Context
- MIB
- CISCO-SP-MIB
- OID
.1.3.6.1.4.1.9.10.73.1.1.34- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cSpScalars
- Siblings
- 43
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cSpSs7Variant The SS7 variant implemented in this SP. | scalar | CSpSs7Variant | .1.3.6.1.4.1.9.10.73.1.1.1 |
| cSpMtp2T07 Excessive delay of acknowledgement timer. The default
and valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the following
references. | scalar | milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.10 |
| cSpMtp2T08 Interval timer for error interval monitor. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.11 |
| cSpMtp3T01 Delay to avoid message mis-sequencing on changeover. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.12 |
| cSpMtp3T02 Waiting for changeover acknowledgement. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.13 |
| cSpMtp3T03 Time controlled diversion-delay to avoid
mis-sequencing on change back. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.14 |
| cSpMtp3T04 Waiting for change back acknowledgement (first
attempt). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.15 |
| cSpMtp3T05 Waiting for change back acknowledgement (second
attempt). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.16 |
| cSpMtp3T06 Delay to avoid message mis-sequencing on controlled
rerouting. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.17 |
| cSpMtp3T07 Waiting for signalling data link connection
acknowledgement. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.18 |
| cSpMtp3T08 Transfer prohibited inhibition timer (transient
solution). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.19 |
| cSpPointCode The point code for this SP. | scalar | CSpPointCode | .1.3.6.1.4.1.9.10.73.1.1.2 |
| cSpMtp3T10 Waiting to repeat signalling routeset test message. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.20 |
| cSpMtp3T11 Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.21 |
| cSpMtp3T12 Waiting for uninhibit acknowledgement. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.22 |
| cSpMtp3T13 Waiting for force uninhibit. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.23 |
| cSpMtp3T14 Waiting for inhibition acknowledgement. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.24 |
| cSpMtp3T15 Waiting to start signalling routeset congestion
test. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.25 |
| cSpMtp3T16 Waiting for routeset congestion status update. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.26 |
| cSpMtp3T17 Delay to avoid oscillation of initial alignment
failure and link restart. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.27 |
| cSpMtp3T18 Timer within a signalling point whose MTP restarts,
for supervising link and linkset activation as well as
the receipt of routing information. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.28 |
| cSpMtp3T19 Supervision timer during MTP restart to avoid
possible ping-pong of TFP, TFR2) and TRA messages. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.29 |
| cSpMtp2T01 Alignment ready timer. The default and valid range is
dependant on the value of cSpSs7Variant. The ranges
are defined in the following references. | scalar | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.3 |
| cSpMtp3T20 Overall MTP restart timer at the signalling point
whose MTP restarts. Overall MTP restart timer at a
signalling point adjacent to one whose MTP restarts. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.30 |
| cSpMtp3T21 Overall MTP restart timer at a signalling point
adjacent to one whose MTP restarts. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.31 |
| cSpMtp3T22 Local inhibit test timer. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.32 |
| cSpMtp3T23 Remote inhibit test timer. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.33 |
| cSpMtp3T25 Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.35 |
| cSpMtp3T26 Timer at restarting SP waiting to repeat traffic
restart waiting message. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.36 |
| cSpMtp3T27 Minimum duration of unavailability for full restart. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.37 |
| cSpMtp3T28 Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.38 |
| cSpMtp3T29 Timer started when TRA sent in response to unexpected
TRA or TRW. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.39 |
| cSpMtp2T02 Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applic… | scalar | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.4 |
| cSpMtp3T30 Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.40 |
| cSpMtp3T31 False link congestion detection timer. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.41 |
| cSpMtp3T32 Link oscillation timer - Procedure A. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.42 |
| cSpMtp3T33 Probation timer for link oscillation - Procedure B. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.43 |
| cSpMtp3T34 Suspension timer for link oscillation - Procedure B. | scalar | seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.44 |
| cSpMtp2T03 Aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant. The ranges
are defined in the following references. | scalar | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.5 |
| cSpMtp2T4N Proving period timer normal timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the
following references. | scalar | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.6 |
| cSpMtp2T4E Proving period timer emergency timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the
following references. | scalar | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.7 |
| cSpMtp2T05 Sending SIB timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references. | scalar | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.8 |
| cSpMtp2T06 Remote congestion timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references. | scalar | milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.1.9 |