cSpLinksetMtp2T4E
CISCO-SP-MIB ·
.1.3.6.1.4.1.9.10.73.1.2.1.1.38
Object
Proving period timer emergency timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the following
references.
This timer is only applicable if cSpLinkType
is serial.
Context
- MIB
- CISCO-SP-MIB
- OID
.1.3.6.1.4.1.9.10.73.1.2.1.1.38- Type
- column
- Access
- readonly
- Status
- current
- Units
- 100 milli-seconds
- Parent
- cSpLinksetTableEntry
- Table
- cSpLinksetTable
- Siblings
- 74
Syntax
100 milli-seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cSpLinksetName The name of the linkset. | column | CSpLinksetId | .1.3.6.1.4.1.9.10.73.1.2.1.1.1 |
| cSpLinksetTupRouteTableName The routing table for Telephone User Part(TUP)
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.10 |
| cSpLinksetIsupRouteTableName The routing table for ISDN User Part messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.11 |
| cSpLinksetDupcRouteTableName The routing table for Data User Part (call and
circuit-related messages). | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.12 |
| cSpLinksetDupfRouteTableName The routing table for Data User Part (facility
registration and cancellation messages). | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.13 |
| cSpLinksetMtupRouteTableName The routing table for MTP Testing User Part
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.14 |
| cSpLinksetBisupRouteTableName The routing table for Broadband ISDN User Part(BISUP)
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.15 |
| cSpLinksetSisupRouteTableName The routing table for Satellite ISDN User Part(SISUP)
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.16 |
| cSpLinksetSpare11RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.17 |
| cSpLinksetSpare12RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.18 |
| cSpLinksetSpare13RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.19 |
| cSpLinksetAdjacentPointCode The point code to which this linkset is connected. | column | CSpPointCode | .1.3.6.1.4.1.9.10.73.1.2.1.1.2 |
| cSpLinksetSpare14RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.20 |
| cSpLinksetSpare15RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.21 |
| cSpLinksetAccountingEnabled This indicates if accounting for this linkset is
enabled.
'true' Indicates that the accounting function is
enabled for this linkset and is being
ac… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.73.1.2.1.1.22 |
| cSpLinksetNumLinks The number of links in this linkset. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.23 |
| cSpLinksetPacketsSent The number of packets(message signal units)
transmitted by this linkset(Q752/3.3). | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.24 |
| cSpLinksetHCPacketsSent The number of packets(message signal units)
transmitted by this linkset(Q752/3.3). This is the
64-bit version of cSpLinksetPacketsSent. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.25 |
| cSpLinksetPacketsRcvd The number of packets(message signal units) received
by this linkset(Q752/3.5). | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.26 |
| cSpLinksetHCPacketsRcvd The number of packets(message signal units) received
by this linkset(Q752/3.5). This is the 64-bit
version of cSpLinksetPacketsRcvd. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.27 |
| cSpLinksetBytesSent The number of bytes transmitted by this
linkset(Q752/3.1). | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.28 |
| cSpLinksetHCBytesSent The number of bytes transmitted by this
linkset(Q752/3.1). This is the 64-bit version of
cSpLinksetBytesSent. | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.29 |
| cSpLinksetState The status of this linkset. | column | CSpOsiState | .1.3.6.1.4.1.9.10.73.1.2.1.1.3 |
| cSpLinksetBytesRcvd The number of bytes received by this
linkset(Q752/3.4). | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.30 |
| cSpLinksetHCBytesRcvd The number of bytes received by this
linkset(Q752/3.4). This is the 64-bit version of
cSpLinksetBytesRcvd. | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.31 |
| cSpLinksetDurationInService Time linkset was providing service related to
Q752/Table 4.2. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.2.1.1.32 |
| cSpLinksetDurationOutService Time linkset was Out-of-Service as required for
Q752/Table 4.2. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.2.1.1.33 |
| cSpLinksetMtp2T01 Alignment ready timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references. | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.34 |
| cSpLinksetMtp2T02 Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.35 |
| cSpLinksetMtp2T03 Aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applic… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.36 |
| cSpLinksetMtp2T4N Proving period timer normal timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the
following references. | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.37 |
| cSpLinksetMtp2T05 Sending SIB timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.39 |
| cSpLinksetInboundAcl Packets are filtered against this access control list
before they are passed to the routing function. A
value of zero indicates that no access control list
is present. | column | CSpAclId | .1.3.6.1.4.1.9.10.73.1.2.1.1.4 |
| cSpLinksetMtp2T06 Remote congestion timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references. | column | 100 milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.40 |
| cSpLinksetMtp2T07 Excessive delay of acknowledgement timer. The default
and valid range is dependant on the value of
cSpSs7Variant The ranges are defined in the following
references.
… | column | 100 milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.41 |
| cSpLinksetMtp2T08 Interval timer for error interval monitor.
Note that this timer is only applicable if cSpLinkType
is serial. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.42 |
| cSpLinksetMtp3T01 Delay to avoid message mis-sequencing on changeover. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.43 |
| cSpLinksetMtp3T02 Waiting for changeover acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.44 |
| cSpLinksetMtp3T03 Time controlled diversion-delay to avoid
mis-sequencing on change back. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.45 |
| cSpLinksetMtp3T04 Waiting for change back acknowledgement (first
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.46 |
| cSpLinksetMtp3T05 Waiting for change back acknowledgement (second
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.47 |
| cSpLinksetMtp3T06 Delay to avoid message mis-sequencing on controlled
rerouting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.48 |
| cSpLinksetMtp3T07 Waiting for signalling data link connection
acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.49 |
| cSpLinksetOutboundAcl Packets are filtered against this access control list
after they have passed through the routing function.
A value of zero indicates that no access control list
is present. | column | CSpAclId | .1.3.6.1.4.1.9.10.73.1.2.1.1.5 |
| cSpLinksetMtp3T08 Transfer prohibited inhibition timer (transient
solution). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.50 |
| cSpLinksetMtp3T10 Waiting to repeat signalling routeset test message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.51 |
| cSpLinksetMtp3T11 Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.52 |
| cSpLinksetMtp3T12 Waiting for uninhibit acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.53 |
| cSpLinksetMtp3T13 Waiting for force uninhibit. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.54 |
| cSpLinksetMtp3T14 Waiting for inhibition acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.55 |
| cSpLinksetMtp3T15 Waiting to start signalling routeset congestion
test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.56 |
| cSpLinksetMtp3T16 Waiting for routeset congestion status update. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.57 |
| cSpLinksetMtp3T17 Delay to avoid oscillation of initial alignment
failure and link restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.58 |
| cSpLinksetMtp3T18 Timer within a signalling point whose MTP restarts,
for supervising link and linkset activation as well as
the receipt of routing information. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.59 |
| cSpLinksetSnmmRouteTableName The routing table for signalling network management
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.6 |
| cSpLinksetMtp3T19 Supervision timer during MTP restart to avoid
possible ping-pong of TFP, TFR2) and TRA messages. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.60 |
| cSpLinksetMtp3T20 Overall MTP restart timer at the signalling point
whose MTP restarts. Overall MTP restart timer at a
signalling point adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.61 |
| cSpLinksetMtp3T21 Overall MTP restart timer at a signalling point
adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.62 |
| cSpLinksetMtp3T22 Local inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.63 |
| cSpLinksetMtp3T23 Remote inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.64 |
| cSpLinksetMtp3T24 Stabilizing timer after removal of local processor
outage, used in LPO latching to RPO (national option) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.65 |
| cSpLinksetMtp3T25 Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.66 |
| cSpLinksetMtp3T26 Timer at restarting SP waiting to repeat traffic
restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.67 |
| cSpLinksetMtp3T27 Minimum duration of unavailability for full restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.68 |
| cSpLinksetMtp3T28 Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.69 |
| cSpLinksetSntmRouteTableName The routing table for signalling network test and
maintenance messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.7 |
| cSpLinksetMtp3T29 Timer started when TRA sent in response to unexpected
TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.70 |
| cSpLinksetMtp3T30 Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.71 |
| cSpLinksetMtp3T31 False link congestion detection timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.72 |
| cSpLinksetMtp3T32 Link oscillation timer - Procedure A. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.73 |
| cSpLinksetMtp3T33 Probation timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.74 |
| cSpLinksetMtp3T34 Suspension timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.75 |
| cSpLinksetSpare2RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.8 |
| cSpLinksetSccpRouteTableName The routing table for SS7 Signaling Connection
Control Part(SCCP) messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.9 |