cSpLinksetBytesRcvd
CISCO-SP-MIB ·
.1.3.6.1.4.1.9.10.73.1.2.1.1.30
Object
The number of bytes received by this linkset(Q752/3.4).
Context
- MIB
- CISCO-SP-MIB
- OID
.1.3.6.1.4.1.9.10.73.1.2.1.1.30- Type
- column
- Access
- readonly
- Status
- current
- Units
- bytes
- Parent
- cSpLinksetTableEntry
- Table
- cSpLinksetTable
- Siblings
- 74
Syntax
bytes SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cSpLinksetName The name of the linkset. | column | CSpLinksetId | .1.3.6.1.4.1.9.10.73.1.2.1.1.1 |
| cSpLinksetTupRouteTableName The routing table for Telephone User Part(TUP)
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.10 |
| cSpLinksetIsupRouteTableName The routing table for ISDN User Part messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.11 |
| cSpLinksetDupcRouteTableName The routing table for Data User Part (call and
circuit-related messages). | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.12 |
| cSpLinksetDupfRouteTableName The routing table for Data User Part (facility
registration and cancellation messages). | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.13 |
| cSpLinksetMtupRouteTableName The routing table for MTP Testing User Part
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.14 |
| cSpLinksetBisupRouteTableName The routing table for Broadband ISDN User Part(BISUP)
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.15 |
| cSpLinksetSisupRouteTableName The routing table for Satellite ISDN User Part(SISUP)
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.16 |
| cSpLinksetSpare11RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.17 |
| cSpLinksetSpare12RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.18 |
| cSpLinksetSpare13RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.19 |
| cSpLinksetAdjacentPointCode The point code to which this linkset is connected. | column | CSpPointCode | .1.3.6.1.4.1.9.10.73.1.2.1.1.2 |
| cSpLinksetSpare14RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.20 |
| cSpLinksetSpare15RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.21 |
| cSpLinksetAccountingEnabled This indicates if accounting for this linkset is
enabled.
'true' Indicates that the accounting function is
enabled for this linkset and is being
ac… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.73.1.2.1.1.22 |
| cSpLinksetNumLinks The number of links in this linkset. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.23 |
| cSpLinksetPacketsSent The number of packets(message signal units)
transmitted by this linkset(Q752/3.3). | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.24 |
| cSpLinksetHCPacketsSent The number of packets(message signal units)
transmitted by this linkset(Q752/3.3). This is the
64-bit version of cSpLinksetPacketsSent. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.25 |
| cSpLinksetPacketsRcvd The number of packets(message signal units) received
by this linkset(Q752/3.5). | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.26 |
| cSpLinksetHCPacketsRcvd The number of packets(message signal units) received
by this linkset(Q752/3.5). This is the 64-bit
version of cSpLinksetPacketsRcvd. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.27 |
| cSpLinksetBytesSent The number of bytes transmitted by this
linkset(Q752/3.1). | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.28 |
| cSpLinksetHCBytesSent The number of bytes transmitted by this
linkset(Q752/3.1). This is the 64-bit version of
cSpLinksetBytesSent. | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.29 |
| cSpLinksetState The status of this linkset. | column | CSpOsiState | .1.3.6.1.4.1.9.10.73.1.2.1.1.3 |
| cSpLinksetHCBytesRcvd The number of bytes received by this
linkset(Q752/3.4). This is the 64-bit version of
cSpLinksetBytesRcvd. | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.2.1.1.31 |
| cSpLinksetDurationInService Time linkset was providing service related to
Q752/Table 4.2. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.2.1.1.32 |
| cSpLinksetDurationOutService Time linkset was Out-of-Service as required for
Q752/Table 4.2. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.2.1.1.33 |
| cSpLinksetMtp2T01 Alignment ready timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references. | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.34 |
| cSpLinksetMtp2T02 Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.35 |
| cSpLinksetMtp2T03 Aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applic… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.36 |
| cSpLinksetMtp2T4N Proving period timer normal timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the
following references. | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.37 |
| cSpLinksetMtp2T4E Proving period timer emergency timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the following
references.
T… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.38 |
| cSpLinksetMtp2T05 Sending SIB timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.39 |
| cSpLinksetInboundAcl Packets are filtered against this access control list
before they are passed to the routing function. A
value of zero indicates that no access control list
is present. | column | CSpAclId | .1.3.6.1.4.1.9.10.73.1.2.1.1.4 |
| cSpLinksetMtp2T06 Remote congestion timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references. | column | 100 milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.40 |
| cSpLinksetMtp2T07 Excessive delay of acknowledgement timer. The default
and valid range is dependant on the value of
cSpSs7Variant The ranges are defined in the following
references.
… | column | 100 milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.41 |
| cSpLinksetMtp2T08 Interval timer for error interval monitor.
Note that this timer is only applicable if cSpLinkType
is serial. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.42 |
| cSpLinksetMtp3T01 Delay to avoid message mis-sequencing on changeover. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.43 |
| cSpLinksetMtp3T02 Waiting for changeover acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.44 |
| cSpLinksetMtp3T03 Time controlled diversion-delay to avoid
mis-sequencing on change back. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.45 |
| cSpLinksetMtp3T04 Waiting for change back acknowledgement (first
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.46 |
| cSpLinksetMtp3T05 Waiting for change back acknowledgement (second
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.47 |
| cSpLinksetMtp3T06 Delay to avoid message mis-sequencing on controlled
rerouting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.48 |
| cSpLinksetMtp3T07 Waiting for signalling data link connection
acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.49 |
| cSpLinksetOutboundAcl Packets are filtered against this access control list
after they have passed through the routing function.
A value of zero indicates that no access control list
is present. | column | CSpAclId | .1.3.6.1.4.1.9.10.73.1.2.1.1.5 |
| cSpLinksetMtp3T08 Transfer prohibited inhibition timer (transient
solution). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.50 |
| cSpLinksetMtp3T10 Waiting to repeat signalling routeset test message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.51 |
| cSpLinksetMtp3T11 Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.52 |
| cSpLinksetMtp3T12 Waiting for uninhibit acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.53 |
| cSpLinksetMtp3T13 Waiting for force uninhibit. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.54 |
| cSpLinksetMtp3T14 Waiting for inhibition acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.55 |
| cSpLinksetMtp3T15 Waiting to start signalling routeset congestion
test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.56 |
| cSpLinksetMtp3T16 Waiting for routeset congestion status update. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.57 |
| cSpLinksetMtp3T17 Delay to avoid oscillation of initial alignment
failure and link restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.58 |
| cSpLinksetMtp3T18 Timer within a signalling point whose MTP restarts,
for supervising link and linkset activation as well as
the receipt of routing information. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.59 |
| cSpLinksetSnmmRouteTableName The routing table for signalling network management
messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.6 |
| cSpLinksetMtp3T19 Supervision timer during MTP restart to avoid
possible ping-pong of TFP, TFR2) and TRA messages. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.60 |
| cSpLinksetMtp3T20 Overall MTP restart timer at the signalling point
whose MTP restarts. Overall MTP restart timer at a
signalling point adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.61 |
| cSpLinksetMtp3T21 Overall MTP restart timer at a signalling point
adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.62 |
| cSpLinksetMtp3T22 Local inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.63 |
| cSpLinksetMtp3T23 Remote inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.64 |
| cSpLinksetMtp3T24 Stabilizing timer after removal of local processor
outage, used in LPO latching to RPO (national option) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.65 |
| cSpLinksetMtp3T25 Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.66 |
| cSpLinksetMtp3T26 Timer at restarting SP waiting to repeat traffic
restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.67 |
| cSpLinksetMtp3T27 Minimum duration of unavailability for full restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.68 |
| cSpLinksetMtp3T28 Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.69 |
| cSpLinksetSntmRouteTableName The routing table for signalling network test and
maintenance messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.7 |
| cSpLinksetMtp3T29 Timer started when TRA sent in response to unexpected
TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.70 |
| cSpLinksetMtp3T30 Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.71 |
| cSpLinksetMtp3T31 False link congestion detection timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.72 |
| cSpLinksetMtp3T32 Link oscillation timer - Procedure A. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.73 |
| cSpLinksetMtp3T33 Probation timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.74 |
| cSpLinksetMtp3T34 Suspension timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.2.1.1.75 |
| cSpLinksetSpare2RouteTableName This routing table has been defined as a spare
routing table by the standards committee. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.8 |
| cSpLinksetSccpRouteTableName The routing table for SS7 Signaling Connection
Control Part(SCCP) messages. | column | CSpRouteTableName | .1.3.6.1.4.1.9.10.73.1.2.1.1.9 |