cSpLinkXmitQueueDepthHighReset
CISCO-SP-MIB ·
.1.3.6.1.4.1.9.10.73.1.3.1.1.58
Object
column
SNMPv2-TCTimeStamp
This indicates when cSpLinkXmitQueueDepthHigh was set to 0.
Context
- MIB
- CISCO-SP-MIB
- OID
.1.3.6.1.4.1.9.10.73.1.3.1.1.58- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cSpLinkTableEntry
- Table
- cSpLinkTable
- Siblings
- 95
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cSpLinkSlc The Signalling Link Code for this link. | column | CSpLinkSLC | .1.3.6.1.4.1.9.10.73.1.3.1.1.1 |
| cSpLinkMtp3BytesRcvd The number of MTP3 bytes received by this link.
This measurement is specified in Q752/3.4 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.10 |
| cSpLinkMtp3BytesSent The number of MTP3 bytes sent by this link.
This measurement is specified in Q752/3.1 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.11 |
| cSpLinkHCMtp3BytesRcvd The number of MTP3 bytes received by this link.
This is the 64-bit version of cSpLinkMtp3BytesRcvd.
This measurement is specified in Q752/3.4 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.12 |
| cSpLinkHCMtp3BytesSent The number of MTP3 bytes sent by this link.
This is the 64-bit version of cSpLinkMtp3BytesSent.
This measurement is specified in Q752/3.1 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.13 |
| cSpLinkMtp2T01 Alignment ready timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is onl… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.14 |
| cSpLinkMtp2T02 Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.15 |
| cSpLinkMtp2T03 Aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applic… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.16 |
| cSpLinkMtp2T4N Proving period timer normal timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the
following references. | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.17 |
| cSpLinkMtp2T4E Proving period timer emergency timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the following
references.
T… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.18 |
| cSpLinkMtp2T05 Sending SIB timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.19 |
| cSpLinkState The status of this link. | column | CSpOsiState | .1.3.6.1.4.1.9.10.73.1.3.1.1.2 |
| cSpLinkMtp2T06 Remote congestion timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is o… | column | 100 milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.20 |
| cSpLinkMtp2T07 Excessive delay of acknowledgement timer. The default
and valid range is dependant on the value of
cSpSs7Variant The ranges are defined in the following
references.
… | column | 100 milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.21 |
| cSpLinkMtp2T08 Interval timer for error interval monitor.
Note that this timer is only applicable if cSpLinkType
is serial. A get on this object will return a
zero if cSpLinkType is not serial. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.22 |
| cSpLinkMtp3T01 Delay to avoid message mis-sequencing on changeover. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.23 |
| cSpLinkMtp3T02 Waiting for changeover acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.24 |
| cSpLinkMtp3T03 Time controlled diversion-delay to avoid
mis-sequencing on change back. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.25 |
| cSpLinkMtp3T04 Waiting for change back acknowledgement (first
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.26 |
| cSpLinkMtp3T05 Waiting for change back acknowledgement (second
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.27 |
| cSpLinkMtp3T06 Delay to avoid message mis-sequencing on controlled
rerouting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.28 |
| cSpLinkMtp3T07 Waiting for signalling data link connection
acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.29 |
| cSpLinkType The link type. | column | CSpLinkType | .1.3.6.1.4.1.9.10.73.1.3.1.1.3 |
| cSpLinkMtp3T08 Transfer prohibited inhibition timer (transient
solution). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.30 |
| cSpLinkMtp3T10 Waiting to repeat signalling routeset test message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.31 |
| cSpLinkMtp3T11 Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.32 |
| cSpLinkMtp3T12 Waiting for uninhibit acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.33 |
| cSpLinkMtp3T13 Waiting for force uninhibit. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.34 |
| cSpLinkMtp3T14 Waiting for inhibition acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.35 |
| cSpLinkMtp3T15 Waiting to start signalling routeset congestion
test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.36 |
| cSpLinkMtp3T16 Waiting for routeset congestion status update. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.37 |
| cSpLinkMtp3T17 Delay to avoid oscillation of initial alignment
failure and link restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.38 |
| cSpLinkMtp3T18 Timer within a signalling point whose MTP restarts,
for supervising link and linkset activation as well as
the receipt of routing information. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.39 |
| cSpLinkifIndex If the link type specified by cSpLinkType is serial,
this is the ifIndex specified in MIB-2, otherwise no
significance is to be placed on this value. | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.10.73.1.3.1.1.4 |
| cSpLinkMtp3T19 Supervision timer during MTP restart to avoid
possible ping-pong of TFP, TFR2) and TRA messages. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.40 |
| cSpLinkMtp3T20 Overall MTP restart timer at the signalling point
whose MTP restarts. Overall MTP restart timer at a
signalling point adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.41 |
| cSpLinkMtp3T21 Overall MTP restart timer at a signalling point
adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.42 |
| cSpLinkMtp3T22 Local inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.43 |
| cSpLinkMtp3T23 Remote inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.44 |
| cSpLinkMtp3T24 Stabilizing timer after removal of local processor
outage, used in LPO latching to RPO (national option) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.45 |
| cSpLinkMtp3T25 Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.46 |
| cSpLinkMtp3T26 Timer at restarting SP waiting to repeat traffic
restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.47 |
| cSpLinkMtp3T27 Minimum duration of unavailability for full restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.48 |
| cSpLinkMtp3T28 Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.49 |
| cSpLinkSctpAssociation If the link type specified by cSpLinkType is sctpIp,
this is the sctpAssocId defined in the CISCO-SCTP-MIB.
Where value greater than or equal to zero indicates
a valid association… | column | Integer32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.5 |
| cSpLinkMtp3T29 Timer started when TRA sent in response to unexpected
TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.50 |
| cSpLinkMtp3T30 Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.51 |
| cSpLinkMtp3T31 False link congestion detection timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.52 |
| cSpLinkMtp3T32 Link oscillation timer - Procedure A. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.53 |
| cSpLinkMtp3T33 Probation timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.54 |
| cSpLinkMtp3T34 Suspension timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.55 |
| cSpLinkXmitQueueDepth Number of packets waiting to be sent over this link. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.56 |
| cSpLinkXmitQueueDepthHigh This is the maximum number of packets waiting
to be sent over this link since the last time this
value was reset as indicated by
cSpLinkXmitQueueDepthHighReset.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.57 |
| cSpLinkCongestionState The signalling link congestion status of this link. 0
is the least congestion level, 3 is the highest
congestion level. | column | Unsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.59 |
| cSpLinkMtp3PacketsRcvd The number of MTP3 packets received by this link.
This measurement is specified in Q752/3.5 | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.6 |
| cSpLinkCongestionAbate1 Threshold used to abate congestion level 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.60 |
| cSpLinkCongestionAbate2 Threshold used to abate congestion level 2. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.61 |
| cSpLinkCongestionAbate3 Threshold used to abate congestion level 3. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.62 |
| cSpLinkCongestionOnset1 Threshold used to mark onset of congestion level 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.63 |
| cSpLinkCongestionOnset2 Threshold used to mark onset of congestion level 2. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.64 |
| cSpLinkCongestionOnset3 Threshold used to mark onset of congestion level 3. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.65 |
| cSpLinkSigLinkTest Indicated if signalling link test is enabled on this
link.
true : signalling link test is enabled.
false : signalling link test not enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.73.1.3.1.1.66 |
| cSpLinkQ752T1E1 Duration of link in the In-Service state Q752/1.1. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.67 |
| cSpLinkQ752T1E2 Count of Signalling Link failures - All reasons Q752/1.2. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.68 |
| cSpLinkQ752T1E3 Count of Signalling Link failures - Abnormal FIBR/BSNR
Q752/1.4. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.69 |
| cSpLinkMtp3PacketsSent The number of MTP3 packets sent by this link.
This measurement is specified in Q752/3.3 | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.7 |
| cSpLinkQ752T1E4 Count of Signalling Link failures - Excessive delay of
acknowledgement Q752/1.4. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.70 |
| cSpLinkQ752T1E5 Count of Signalling Link failures - Excessive error rate
Q752/1.5. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.71 |
| cSpLinkQ752T1E6 Count of Signalling Link failures - Excessive duration
of congestion Q752/1.6. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.72 |
| cSpLinkQ752T1E7 Count of alignment or proving errors Q752/1.7. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.73 |
| cSpLinkQ752T1E8 Count of signal units received in error Q752/1.8. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.74 |
| cSpLinkQ752T1E9 Count of negative acknowledgements received Q752/1.9. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.75 |
| cSpLinkQ752T1E10 Count of 'local automatic changeover' events
Q752/1.10. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.76 |
| cSpLinkQ752T1E11 Count of 'local automatic changeback' events Q752/1.11. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.77 |
| cSpLinkQ752T2E1 Duration of Signalling Link unavailable(for any reason)
Q752/2.1. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.78 |
| cSpLinkQ752T2E5 Duration of Signalling Link unavailable due to local
management actions Q752/2.5. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.79 |
| cSpLinkHCMtp3PacketsRcvd The number of MTP3 packets received by this link.
This is the 64-bit version of cSpLinkMtp3PacketsRcvd.
This measurement is specified in Q752/3.5 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.8 |
| cSpLinkQ752T2E6 Duration of Signalling Link unavailable due to remote
management actions Q752/2.6. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.80 |
| cSpLinkQ752T2E7 Duration of Signalling Link unavailable due to link
failure Q752/2.7. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.81 |
| cSpLinkQ752T2E9 Duration of Signalling Link unavailable due to remote
processor outage Q752/2.9. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.82 |
| cSpLinkQ752T2E10 Count of 'remote processor outage' events Q752/2.10 and
Q752/2.11. The standard only requires that events are
issued. The entries have been combined into a single
entry to trac… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.83 |
| cSpLinkQ752T2E15 Duration of local busy Q752/2.15. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.84 |
| cSpLinkQ752T2E16 Count of local inhibition Q752/2.16 and Q752/2.17.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.85 |
| cSpLinkQ752T2E18 Count of remote inhibition Q752/2.18 and Q752/2.19.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.86 |
| cSpLinkMtp3PacketsRetrans The number of MTP3 packets retransmitted on this link.
This measurement is specified in Q752/3.2 | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.87 |
| cSpLinkMtp3BytesRetrans The number of MTP3 bytes retransmitted on this link.
This measurement is specified in Q752/3.2 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.88 |
| cSpLinkQ752T3E6 The number times this signalling link was marked
congested. This measurement is specified in Q752/3.6 | column | events SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.89 |
| cSpLinkHCMtp3PacketsSent The number of MTP3 packets sent by this link.
This is the 64-bit version of cSpLinkMtp3PacketsSent.
This measurement is specified in Q752/3.3 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.9 |
| cSpLinkQ752T3E7 Cumulative duration of signalling link congestion
Q752/3.7. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.90 |
| cSpLinkQ752T3E10L1 The number of packets(MSUs) discarded due to signalling
link level 1 congestion Q752/3.10 | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.91 |
| cSpLinkQ752T3E10L2 The number of packets(MSUs) discard due to signalling
link level 2 congestion Q752/3.10 | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.92 |
| cSpLinkQ752T3E10L3 The number of packets(MSUs) discard due to signalling
link level 3 congestion Q752/3.10 | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.93 |
| cSpLinkQ752T3E11L1 The number times this signalling link entered congestion
level 1 and packets were discarded. This measurement is
specified in Q752/3.11 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.94 |
| cSpLinkQ752T3E11L2 The number times this signalling link entered congestion
level 2 and packets were discarded. This measurement is
specified in Q752/3.11 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.95 |
| cSpLinkQ752T3E11L3 The number times this signalling link entered congestion
level 3 and packets were discarded. This measurement is
specified in Q752/3.11 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.96 |