cSpLinkMtp2T06
CISCO-SP-MIB ·
.1.3.6.1.4.1.9.10.73.1.3.1.1.20
Object
Remote congestion timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applicable if cSpLinkType
is serial. A get on this object will return a
zero if cSpLinkType is not serial.
Context
- MIB
- CISCO-SP-MIB
- OID
.1.3.6.1.4.1.9.10.73.1.3.1.1.20- Type
- column
- Access
- readonly
- Status
- current
- Units
- 100 milli-seconds.
- Parent
- cSpLinkTableEntry
- Table
- cSpLinkTable
- Siblings
- 95
Syntax
100 milli-seconds. SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cSpLinkSlc The Signalling Link Code for this link. | column | CSpLinkSLC | .1.3.6.1.4.1.9.10.73.1.3.1.1.1 |
| cSpLinkMtp3BytesRcvd The number of MTP3 bytes received by this link.
This measurement is specified in Q752/3.4 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.10 |
| cSpLinkMtp3BytesSent The number of MTP3 bytes sent by this link.
This measurement is specified in Q752/3.1 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.11 |
| cSpLinkHCMtp3BytesRcvd The number of MTP3 bytes received by this link.
This is the 64-bit version of cSpLinkMtp3BytesRcvd.
This measurement is specified in Q752/3.4 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.12 |
| cSpLinkHCMtp3BytesSent The number of MTP3 bytes sent by this link.
This is the 64-bit version of cSpLinkMtp3BytesSent.
This measurement is specified in Q752/3.1 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.13 |
| cSpLinkMtp2T01 Alignment ready timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is onl… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.14 |
| cSpLinkMtp2T02 Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.15 |
| cSpLinkMtp2T03 Aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applic… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.16 |
| cSpLinkMtp2T4N Proving period timer normal timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the
following references. | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.17 |
| cSpLinkMtp2T4E Proving period timer emergency timer. The default and
valid range is dependant on the value of
cSpSs7Variant. The ranges are defined in the following
references.
T… | column | 100 milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.18 |
| cSpLinkMtp2T05 Sending SIB timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only ap… | column | milli-seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.19 |
| cSpLinkState The status of this link. | column | CSpOsiState | .1.3.6.1.4.1.9.10.73.1.3.1.1.2 |
| cSpLinkMtp2T07 Excessive delay of acknowledgement timer. The default
and valid range is dependant on the value of
cSpSs7Variant The ranges are defined in the following
references.
… | column | 100 milli-seconds. SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.21 |
| cSpLinkMtp2T08 Interval timer for error interval monitor.
Note that this timer is only applicable if cSpLinkType
is serial. A get on this object will return a
zero if cSpLinkType is not serial. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.22 |
| cSpLinkMtp3T01 Delay to avoid message mis-sequencing on changeover. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.23 |
| cSpLinkMtp3T02 Waiting for changeover acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.24 |
| cSpLinkMtp3T03 Time controlled diversion-delay to avoid
mis-sequencing on change back. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.25 |
| cSpLinkMtp3T04 Waiting for change back acknowledgement (first
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.26 |
| cSpLinkMtp3T05 Waiting for change back acknowledgement (second
attempt). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.27 |
| cSpLinkMtp3T06 Delay to avoid message mis-sequencing on controlled
rerouting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.28 |
| cSpLinkMtp3T07 Waiting for signalling data link connection
acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.29 |
| cSpLinkType The link type. | column | CSpLinkType | .1.3.6.1.4.1.9.10.73.1.3.1.1.3 |
| cSpLinkMtp3T08 Transfer prohibited inhibition timer (transient
solution). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.30 |
| cSpLinkMtp3T10 Waiting to repeat signalling routeset test message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.31 |
| cSpLinkMtp3T11 Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.32 |
| cSpLinkMtp3T12 Waiting for uninhibit acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.33 |
| cSpLinkMtp3T13 Waiting for force uninhibit. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.34 |
| cSpLinkMtp3T14 Waiting for inhibition acknowledgement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.35 |
| cSpLinkMtp3T15 Waiting to start signalling routeset congestion
test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.36 |
| cSpLinkMtp3T16 Waiting for routeset congestion status update. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.37 |
| cSpLinkMtp3T17 Delay to avoid oscillation of initial alignment
failure and link restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.38 |
| cSpLinkMtp3T18 Timer within a signalling point whose MTP restarts,
for supervising link and linkset activation as well as
the receipt of routing information. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.39 |
| cSpLinkifIndex If the link type specified by cSpLinkType is serial,
this is the ifIndex specified in MIB-2, otherwise no
significance is to be placed on this value. | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.10.73.1.3.1.1.4 |
| cSpLinkMtp3T19 Supervision timer during MTP restart to avoid
possible ping-pong of TFP, TFR2) and TRA messages. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.40 |
| cSpLinkMtp3T20 Overall MTP restart timer at the signalling point
whose MTP restarts. Overall MTP restart timer at a
signalling point adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.41 |
| cSpLinkMtp3T21 Overall MTP restart timer at a signalling point
adjacent to one whose MTP restarts. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.42 |
| cSpLinkMtp3T22 Local inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.43 |
| cSpLinkMtp3T23 Remote inhibit test timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.44 |
| cSpLinkMtp3T24 Stabilizing timer after removal of local processor
outage, used in LPO latching to RPO (national option) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.45 |
| cSpLinkMtp3T25 Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.46 |
| cSpLinkMtp3T26 Timer at restarting SP waiting to repeat traffic
restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.47 |
| cSpLinkMtp3T27 Minimum duration of unavailability for full restart. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.48 |
| cSpLinkMtp3T28 Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.49 |
| cSpLinkSctpAssociation If the link type specified by cSpLinkType is sctpIp,
this is the sctpAssocId defined in the CISCO-SCTP-MIB.
Where value greater than or equal to zero indicates
a valid association… | column | Integer32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.5 |
| cSpLinkMtp3T29 Timer started when TRA sent in response to unexpected
TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.50 |
| cSpLinkMtp3T30 Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.51 |
| cSpLinkMtp3T31 False link congestion detection timer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.52 |
| cSpLinkMtp3T32 Link oscillation timer - Procedure A. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.53 |
| cSpLinkMtp3T33 Probation timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.54 |
| cSpLinkMtp3T34 Suspension timer for link oscillation - Procedure B. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.55 |
| cSpLinkXmitQueueDepth Number of packets waiting to be sent over this link. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.56 |
| cSpLinkXmitQueueDepthHigh This is the maximum number of packets waiting
to be sent over this link since the last time this
value was reset as indicated by
cSpLinkXmitQueueDepthHighReset.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.57 |
| cSpLinkXmitQueueDepthHighReset This indicates when cSpLinkXmitQueueDepthHigh
was set to 0. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.73.1.3.1.1.58 |
| cSpLinkCongestionState The signalling link congestion status of this link. 0
is the least congestion level, 3 is the highest
congestion level. | column | Unsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.59 |
| cSpLinkMtp3PacketsRcvd The number of MTP3 packets received by this link.
This measurement is specified in Q752/3.5 | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.6 |
| cSpLinkCongestionAbate1 Threshold used to abate congestion level 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.60 |
| cSpLinkCongestionAbate2 Threshold used to abate congestion level 2. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.61 |
| cSpLinkCongestionAbate3 Threshold used to abate congestion level 3. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.62 |
| cSpLinkCongestionOnset1 Threshold used to mark onset of congestion level 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.63 |
| cSpLinkCongestionOnset2 Threshold used to mark onset of congestion level 2. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.64 |
| cSpLinkCongestionOnset3 Threshold used to mark onset of congestion level 3. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.65 |
| cSpLinkSigLinkTest Indicated if signalling link test is enabled on this
link.
true : signalling link test is enabled.
false : signalling link test not enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.73.1.3.1.1.66 |
| cSpLinkQ752T1E1 Duration of link in the In-Service state Q752/1.1. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.67 |
| cSpLinkQ752T1E2 Count of Signalling Link failures - All reasons Q752/1.2. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.68 |
| cSpLinkQ752T1E3 Count of Signalling Link failures - Abnormal FIBR/BSNR
Q752/1.4. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.69 |
| cSpLinkMtp3PacketsSent The number of MTP3 packets sent by this link.
This measurement is specified in Q752/3.3 | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.7 |
| cSpLinkQ752T1E4 Count of Signalling Link failures - Excessive delay of
acknowledgement Q752/1.4. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.70 |
| cSpLinkQ752T1E5 Count of Signalling Link failures - Excessive error rate
Q752/1.5. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.71 |
| cSpLinkQ752T1E6 Count of Signalling Link failures - Excessive duration
of congestion Q752/1.6. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.72 |
| cSpLinkQ752T1E7 Count of alignment or proving errors Q752/1.7. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.73 |
| cSpLinkQ752T1E8 Count of signal units received in error Q752/1.8. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.74 |
| cSpLinkQ752T1E9 Count of negative acknowledgements received Q752/1.9. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.75 |
| cSpLinkQ752T1E10 Count of 'local automatic changeover' events
Q752/1.10. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.76 |
| cSpLinkQ752T1E11 Count of 'local automatic changeback' events Q752/1.11. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.77 |
| cSpLinkQ752T2E1 Duration of Signalling Link unavailable(for any reason)
Q752/2.1. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.78 |
| cSpLinkQ752T2E5 Duration of Signalling Link unavailable due to local
management actions Q752/2.5. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.79 |
| cSpLinkHCMtp3PacketsRcvd The number of MTP3 packets received by this link.
This is the 64-bit version of cSpLinkMtp3PacketsRcvd.
This measurement is specified in Q752/3.5 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.8 |
| cSpLinkQ752T2E6 Duration of Signalling Link unavailable due to remote
management actions Q752/2.6. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.80 |
| cSpLinkQ752T2E7 Duration of Signalling Link unavailable due to link
failure Q752/2.7. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.81 |
| cSpLinkQ752T2E9 Duration of Signalling Link unavailable due to remote
processor outage Q752/2.9. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.82 |
| cSpLinkQ752T2E10 Count of 'remote processor outage' events Q752/2.10 and
Q752/2.11. The standard only requires that events are
issued. The entries have been combined into a single
entry to trac… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.83 |
| cSpLinkQ752T2E15 Duration of local busy Q752/2.15. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.84 |
| cSpLinkQ752T2E16 Count of local inhibition Q752/2.16 and Q752/2.17.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.85 |
| cSpLinkQ752T2E18 Count of remote inhibition Q752/2.18 and Q752/2.19.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.86 |
| cSpLinkMtp3PacketsRetrans The number of MTP3 packets retransmitted on this link.
This measurement is specified in Q752/3.2 | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.87 |
| cSpLinkMtp3BytesRetrans The number of MTP3 bytes retransmitted on this link.
This measurement is specified in Q752/3.2 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.88 |
| cSpLinkQ752T3E6 The number times this signalling link was marked
congested. This measurement is specified in Q752/3.6 | column | events SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.89 |
| cSpLinkHCMtp3PacketsSent The number of MTP3 packets sent by this link.
This is the 64-bit version of cSpLinkMtp3PacketsSent.
This measurement is specified in Q752/3.3 | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.73.1.3.1.1.9 |
| cSpLinkQ752T3E7 Cumulative duration of signalling link congestion
Q752/3.7. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.73.1.3.1.1.90 |
| cSpLinkQ752T3E10L1 The number of packets(MSUs) discarded due to signalling
link level 1 congestion Q752/3.10 | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.91 |
| cSpLinkQ752T3E10L2 The number of packets(MSUs) discard due to signalling
link level 2 congestion Q752/3.10 | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.92 |
| cSpLinkQ752T3E10L3 The number of packets(MSUs) discard due to signalling
link level 3 congestion Q752/3.10 | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.93 |
| cSpLinkQ752T3E11L1 The number times this signalling link entered congestion
level 1 and packets were discarded. This measurement is
specified in Q752/3.11 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.94 |
| cSpLinkQ752T3E11L2 The number times this signalling link entered congestion
level 2 and packets were discarded. This measurement is
specified in Q752/3.11 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.95 |
| cSpLinkQ752T3E11L3 The number times this signalling link entered congestion
level 3 and packets were discarded. This measurement is
specified in Q752/3.11 | column | bytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.73.1.3.1.1.96 |