llcSapAdminDelayAckCount

Object

column r/w SNMPv2-SMIInteger32

This object denotes the default value for the
maximum number of consecutive I PDUs which the
LLCs on this SAP shall receive during the
interval defined by llcCcOperDelayTimer without
sending an immediate acknowledgement.  This
must be less than or equal to the value of
llcCcOperMaxUnackIPDURcv. This function is not
described in the IEEE 802.2 specification [5]
but is widely implemented.
              
A zero value for this object indicates that the
port default, llcPortAdminDelayAck, shall be
used as the SAP default.  This SAP default
value may be overridden by a non-zero value in
the llcCcAdminDelayAckCount.
              
A value of one indicates that acknowledgments
will be sent immediately and that the value of
llcSapAdminDelayAckTimer shall be ignored.

Context

MIB: CISCO-SNA-LLC-MIB
OID: .1.3.6.1.4.1.9.10.8.1.2.1.1.11
Type: column
Access: readwrite
Status: current
Parent: llcSapAdminEntry
Table: llcSapAdminTable
Siblings: 12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
llcSapNumber The address of this local SAP.	column	Integer32	`.1.3.6.1.4.1.9.10.8.1.2.1.1.1`
llcSapAdminInactTimer This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive any PDU from the remote LLC. This function is not described …	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.10.8.1.2.1.1.10`
llcSapAdminDelayAckTimer This object denotes the default value for the time interval during which the LLCs on this SAP shall delay acknowledgment of one or more I PDUs (up to the value of llcCcOperDelayAc…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.10.8.1.2.1.1.12`
llcSapAdminNw This object denotes the default value for the number of IPDUs that must be acknowledged before the working window size (Ww) can be incremented by 1 when the working window is not …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.10.8.1.2.1.1.13`
llcSapAdminMaxPDUOctets This object denotes the default maximum I PDU size, in octets, that LLCs on this SAP may send to their remote connection component partners. This count is referred to as 'N1' in t…	column	octets SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.10.8.1.2.1.1.2`
llcSapAdminMaxUnackedIPDUsSend This object denotes the default maximum consecutive unacknowledged I PDU frames that LLCs on this SAP may send to their remote LLC partners. This count is referred to as 'k' in th…	column	Integer32	`.1.3.6.1.4.1.9.10.8.1.2.1.1.3`
llcSapAdminMaxUnackedIPDUsRcv This object denotes the default maximum number of unacknowledged I PDUs that LLCs on this SAP can expect to receive from their remote LLC partners. This count is referred to as 'k…	column	Integer32	`.1.3.6.1.4.1.9.10.8.1.2.1.1.4`
llcSapAdminMaxRetransmits This object denotes the default value for the maximum number of times that LLCs on this SAP shall retry PDUs following the expiration of the acknowledgement timer, the P-bit timer…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.10.8.1.2.1.1.5`
llcSapAdminAckTimer This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive either: 1) an acknowledgement to one or more o…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.10.8.1.2.1.1.6`
llcSapAdminPbitTimer This object denotes the default value for the time interval during which the LLCs on this port shall expect to receive a PDU with the F bit set to '1' in response to a Type 2 comm…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.10.8.1.2.1.1.7`
llcSapAdminRejTimer This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive a reply to a REJ PDU. The expiration of this t…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.10.8.1.2.1.1.8`
llcSapAdminBusyTimer This object denotes the default value for the time interval during which the LLCs on this SAP shall expect to receive an indication that a busy condition at the remote LLC has cle…	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.10.8.1.2.1.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects