llcCcOperMaxUnackedIPDUsSend
CISCO-SNA-LLC-MIB ·
.1.3.6.1.4.1.9.10.8.1.3.2.1.4
Object
column
Integer32
This object denotes the maximum consecutive
unacknowledged I PDU frames that this LLC may
send to its remote LLC partner. This count is
referred to as 'k' in the IEEE 802.2
specification [5].
At connection setup, the remote LLC may send,
using an XID frame, the maximum number of
unacknowledged I PDUs which it is prepared to
receive. If so, an implementation may choose to
override the administered maximum number of
unacknowledged PDUs with the dynamically learned
value and should reflect that in this object.
Context
- MIB
- CISCO-SNA-LLC-MIB
- OID
.1.3.6.1.4.1.9.10.8.1.3.2.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- llcCcOperEntry
- Table
- llcCcOperTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-127
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| llcCcOperState This object describes the operational state of
the LLC connection. If the connection component
is disabled, llcCcOperState will transition to
aDM(1). If the connection component… | column | Enumeration | .1.3.6.1.4.1.9.10.8.1.3.2.1.1 |
| llcCcOperBusyTimer This object denotes the value for the time
interval during which this LLC shall expect to
receive an indication that a busy condition at
the remote LLC has cleared.
… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.8.1.3.2.1.10 |
| llcCcOperInactTimer This object denotes the value for the time
interval during which this LLC shall expect to
receive any PDU from the remote LLC. This
function is not described in the IEEE 802.2
sp… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.8.1.3.2.1.11 |
| llcCcOperDelayAckCount This object denotes the value for the maximum
number of consecutive I PDUs which this LLC
shall receive during the interval defined by
llcCcOperDelayTimer without sending an
immed… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.8.1.3.2.1.12 |
| llcCcOperDelayAckTimer This object denotes the value for the time
interval during which this LLC shall delay
acknowledgment of one or more I PDUs (up to the
value of llcCcOperDelayAckCount). This functi… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.8.1.3.2.1.13 |
| llcCcOperNw This object denotes the value for the number
of IPDUs that must be acknowledged before the
working window size (Ww) can be incremented by
1 when the working window is not equal to… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.8.1.3.2.1.14 |
| llcCcOperWw Maximum number of sequentially numbered IPDUs
that the connection component may have
outstanding (unacknowledged) at any given time.
Ww is initialized to the value of
llcCcOperMax… | column | Integer32 | .1.3.6.1.4.1.9.10.8.1.3.2.1.15 |
| llcCcOperCreateTime This object describes the value of sysUpTime
when this connection was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.8.1.3.2.1.16 |
| llcCcOperLastModifyTime This object describes the value of sysUpTime
the last time this connection component was
modified. If the connection has not been
modified, then this value shall be zero. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.8.1.3.2.1.17 |
| llcCcOperLastFailTime This object describes the value of sysUpTime
when this LLC connection component last
failed. If the connection component has not failed,
then this value shall be zero. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.8.1.3.2.1.18 |
| llcCcOperLastFailCause This enumerated object reflects the cause of
the last failure of this LLC connection
component. If the connection component has not
failed, then this object will have a value of
… | column | Enumeration | .1.3.6.1.4.1.9.10.8.1.3.2.1.19 |
| llcCcOperMaxIPDUOctetsSend This object denotes the maximum I PDU size, in
octets, that this LLC SAP may send to its
remote connection component partner. This count
is referred to as 'N1' in the IEEE 802.2
s… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.8.1.3.2.1.2 |
| llcCcOperLastFailFRMRInfo This object reflects the information field of
the FRMR frame if the last failure for this LLC
connection component was as a result of an
invalid frame. Otherwise, this field has … | column | OctetString | .1.3.6.1.4.1.9.10.8.1.3.2.1.20 |
| llcCcOperLastWwCause This object indicates the reason that the llcCcOperWw
was reduced the last time this occurred. | column | Enumeration | .1.3.6.1.4.1.9.10.8.1.3.2.1.21 |
| llcCcOperMaxIPDUOctetsRcv This object denotes the maximum I PDU size, in
octets, that this LLC can expect to receive
from its remote LLC partner. This count is
referred to as 'N1' in the IEEE 802.2
specifi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.8.1.3.2.1.3 |
| llcCcOperMaxUnackedIPDUsRcv This object denotes the maximum number of
unacknowledged I PDUs that this LLC can expect
to receive from its remote LLC partner. This
count is referred to as 'k' in the IEEE 802.2… | column | Integer32 | .1.3.6.1.4.1.9.10.8.1.3.2.1.5 |
| llcCcOperMaxRetransmits This object denotes the value for the maximum
number of times that this LLC shall retry PDUs
following the expiration of the acknowledgement
timer, the P-bit timer or the reject t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.10.8.1.3.2.1.6 |
| llcCcOperAckTimer This object denotes the value for the time
interval during which this LLC shall expect to
receive either:
1) an acknowledgement to one or more
outstanding I PDUs. … | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.8.1.3.2.1.7 |
| llcCcOperPbitTimer This object denotes the value for the time
interval during which this LLC shall expect to
receive a PDU with the F bit set to '1' in
response to a Type 2 command with the P bit se… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.8.1.3.2.1.8 |
| llcCcOperRejTimer This object denotes the value for the time
interval during which this LLC shall expect to
receive a reply to a REJ PDU.
The expiration of this timer shall cause the… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.8.1.3.2.1.9 |