csbDiameterConnectionStatusNotifEnabled
CISCO-SESS-BORDER-CTRLR-EVENT-MIB ·
.1.3.6.1.4.1.9.9.658.1.59
Object
The diameter connection status linkset notification truth value. 'true' - Indicates that csbDiameterConnectionStatus notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' - Indicates that csbDiameterConnectionStatus notification generation is disabled.
Context
- MIB
- CISCO-SESS-BORDER-CTRLR-EVENT-MIB
- OID
.1.3.6.1.4.1.9.9.658.1.59- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ciscoSessBorderCtrlrMIBObjects
- Siblings
- 78
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| csbAlarmSubsystem This object identifies the subsystem or application module
which generated the alarm.
The subsystem which is involved in call establishment only is
of type signaling.
The subsyst… | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.1 |
| csbSrcAlertLocalAddressType This MIB object represents the address type of local source on
which the media (RTP/RTCP) packets from an unexpected source
was received during a SIP/H.248 call flow. The IP addr… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.658.1.10 |
| csbSrcAlertLocalAddress This MIB object represents the local address on which the
media (RTP/RTCP) packets from an unexpected source was received
during a SIP/H.248 call flow. The IP address could be of … | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.11 |
| csbSrcAlertLocalPort This MIB object represents the local RTP port number for the
flow on which the unexpected source packet was received.
Note the RTP port number is reported in the case where the
un… | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.658.1.12 |
| csbSrcAlertRemoteAddressType This MIB object represents the type of address for the source
address in media packets received from an unexpected source
(not
received from the source with which SIP/H.248 call i… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.658.1.13 |
| csbSrcAlertRemoteAddress This MIB object represents the source address from which
unexpected media packets are received during a SIP/H.248
call flow, i.e., media packets are not received from the source
… | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.14 |
| csbSrcAlertRemotePort This MIB object represents the source port from which
unexpected media packets are received during a SIP/H.248
call flow (i.e. media packets are not received from the source
with… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.658.1.15 |
| csbSrcAlertVpnId This MIB object represents the VPN Identifier for the Virtual
Private Network within which the source flow is allocated. As
this is an OCTET STRING, the MIB object will populate a… | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.16 |
| csbDynamicBlackListSubFamily This MIB object represents the subfamily to which a blacklist
source belongs. | scalar | CsbDynamicBlackListedSrcSubFamily | .1.3.6.1.4.1.9.9.658.1.17 |
| csbDynamicBlackListVpnId This MIB object represents the VPN Identifier for the Virtual
Private Network that the source flow is allocated in. The value
of this MIB object will be 0 if the source flow is no… | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.18 |
| csbDynamicBlackListAddressType This MIB object represents the type of the address of the
source. This MIB object is not applicable for subfamilies of
type 'blackVpn' and hence a value of 'unknown' will be
popul… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.658.1.19 |
| csbAlarmSeverity This object identifies the perceived alarm severity associated
with a service or safety affecting condition and/or event.
These are based on ITU severities except that info is a… | scalar | CISCO-TCCiscoAlarmSeverity | .1.3.6.1.4.1.9.9.658.1.2 |
| csbDynamicBlackListAddress This MIB object represents the address of the source. This
object could be if type csbDynamicBlackListAddressType. This
MIB object is not applicable for subfamilies of type 'black… | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.658.1.20 |
| csbDynamicBlackListTransportType This MIB object represents the transport type of the source
port. This MIB object is not applicable for subfamilies of type
'blackVpn' and 'blackAddr', hence a value 'unknown' wil… | scalar | CsbDynamicBlackListedTransPortType | .1.3.6.1.4.1.9.9.658.1.21 |
| csbDynamicBlackListPortNumber This MIB object represents the source port number. This MIB
object is not applicable for subfamilies of type 'blackVpn' and
'blackAddr' and hence a value of 'unknown' will be popu… | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.658.1.22 |
| csbDynamicBlackListSrcBlocked This MIB object represents the access control imposed on the
blacklisted source by the controller. A value of 'true'
indicates access is blocked and A value of 'false' indicates
t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.23 |
| csbAdjacencyType This MIB object represents the protocol type of the adjacency.
The adjacency are of two types - SIP and H.323. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.24 |
| csbAdjacencyState This MIB object represents the adjacency state. The adjacency
state can either be attached or detached. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.25 |
| csbAdjacencyName This MIB object represents the name of the adjacency. The
length of this object will be zero if the adjacency name is not
defined. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.26 |
| csbAdjacencyAccountName This MIB object represents the account name associated with the
adjacency. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.27 |
| csbSBCServiceState This MIB object represents the current state of the service
card.
SBC service is in active state if it is configured on the
primary card and the service card is in active state.
T… | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.28 |
| csbSBCServiceSlot This MIB object represents the slot identifier of the service
card. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.658.1.29 |
| csbAlarmID This object identifies the alarm identification number. It is
a unique number generated by agent in the incremented order
like for the first alarm it is 1, for second alarm it is… | scalar | Integer32 | .1.3.6.1.4.1.9.9.658.1.3 |
| csbCongestionAlarmType This MIB object represents the type of the CSB system
congestion alarm. The alarm is raised either due to 'high CPU
usage' or 'high memory usage'. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.30 |
| csbCongestionAlarmState This MIB object represents the CSB system congestion alarm
state. The state is either 'raised' or 'cleared'. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.31 |
| csbSLAPolicyAccountName This MIB object represents the account name of the source
which was involved in policy violation. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.32 |
| csbSLAPolicyScope This MIB object represents the scope of the SLA policy which
has been violated. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.33 |
| csbSLAPolicyLimit deprecated This MIB object represents the currently defined policy
limits. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.658.1.34 |
| csbSLAViolationEvent This MIB object represents the type of SLA policy violation
event. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.35 |
| csbSLAPolicyRestriction This MIB object represents the SLA policy restriction
description means the violation of the call policy has resulted
into which type of restriction, like if maximum number of cal… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.36 |
| csbSLACurrentUsage deprecated This MIB object represents the actual usage value for the event
which leads to the SLA violation, like if maximum number of
calls are more than SLA policy then actual value of thi… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.658.1.37 |
| csbRadiusConnectionState This MIB object represents the RADIUS server connection state.
The connection state can either be up or down. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.38 |
| csbRadiusType This MIB object represents the type of RADIUS either for
accounting or for authentication. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.39 |
| csbAlarmTime This object identifies the time when alarm was generated. It
is in the form: dow mon dd hh:mm:ss zzz yyyy
where:
dow is the day of the week (Sun, Mon, Tue, Wed,
Thu, F… | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.4 |
| csbRadiusServerName This MIB object represents the name of the RADIUS server. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.40 |
| csbRadiusServerAddressType This MIB object represents the address type of RADIUS server
(IPv4 or IPv6). | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.658.1.41 |
| csbRadiusServerAddress This MIB object represents address of the RADIUS server. This
object could be of type csbRadiusServerAddressType. | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.42 |
| csbRadiusServerPriority This MIB object represents the priority of the RADIUS server
in case of the multiple servers. Higher the number, the higher
is its priority. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.658.1.43 |
| csbDiameterConnectionState This MIB object represents the diameter server connection
state. The connection state can either be up or down. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.44 |
| csbDiameterType This MIB object represents the type of diameter server used
which can be either for accounting or for authentication here. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.45 |
| csbDiameterGroupName This MIB object represents the diameter group name. The length
of this object is zero if the diameter type is authentication. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.46 |
| csbDiameterServerName This MIB object represents the diameter server name. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.47 |
| csbH248ControllerState This MIB object represents the current state of H.248
controller with respect to SBC which is attached or detached
state. | scalar | Enumeration | .1.3.6.1.4.1.9.9.658.1.48 |
| csb248ControllerAddressType This MIB object represents the address type of the H.248
controller. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.658.1.49 |
| csbSBCServiceName This MIB object represents the name of the SBC service
configured on the service card. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.658.1.5 |
| csbH248ControllerAddress This MIB object represents the address of the H.248
controller. This object is of the type
csb248ControllerAddressType. | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.50 |
| csbH248ControllerPort This MIB object represents the port of the H.248 controller. | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.658.1.51 |
| csbSourceAlertNotifEnabled The source alert linkset notification truth value.
'true' - Indicates that csbSourceAlertEvent notification is to
be generated when the state changes. That is, the notification
ge… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.52 |
| csbBlackListNotifEnabled The dynamic blacklist linkset notification truth value.
'true' - Indicates that csbDynamicBlackListEvent notification is
to be generated when the state changes. That is, the
notif… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.53 |
| csbAdjacencyStatusNotifEnabled The adjacency status linkset notification truth value.
'true' - Indicates that csbAdjacencyStatus notification is
to be generated when the state changes. That is, the
notification… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.54 |
| csbServiceStateNotifEnabled The service state linkset notification truth value.
'true' - Indicates that csbServiceStateEvent notification is
to be generated when the state changes. That is, the
notification … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.55 |
| csbCongestionAlarmNotifEnabled The system congestion alarm linkset notification truth value.
'true' - Indicates that csbSystemCongestionAlarmEvent
notification is to be generated when the state changes. That is… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.56 |
| csbSLAViolationNotifEnabled deprecated The SLA violation linkset notification truth value.
'true' - Indicates that csbSLAViolation notification is to be
generated when the state changes. That is, the notification
gener… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.57 |
| csbRadiusConnectionStatusNotifEnabled The radius connection status linkset notification truth value.
'true' - Indicates that csbRadiusConnectionStatus notification
is to be generated when the state changes. That is, t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.58 |
| csbAlarmDescription This MIB object represents the description of the conditions
due to which the notification is raised. | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.6 |
| csbH248ControllerStatusNotifEnabled The H248 controller status linkset notification truth
value.
'true' - Indicates that csbH248ControllerStatus notification is
to be generated when the state changes. That is, the
n… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.60 |
| csbSLAPolicyLimitRev1 This MIB object represents the currently defined policy limits.
If the SLA is for max-num-calls, this value is the configured
maximum number of calls. If the SLA is for max-call-r… | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.658.1.61 |
| csbSLACurrentUsageRev1 This MIB object represents the actual usage value for the event
which leads to the SLA violation, like if maximum number of
calls are more than SLA policy then actual value of thi… | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.658.1.62 |
| csbSLAViolationNotifEnabledRev1 The SLA violation linkset notification truth value.
'true' - Indicates that csbSLAViolationRev1 notification is to
be generated when the state changes. That is, the notification
… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.63 |
| csbQOSAlertCurrentValue This object indicates the current measured value of the QOS
object. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.658.1.64 |
| csbQOSAlertCurrentLevel The current Threshold Level of the measured object. The levels
are Major, Minor, Critical. | scalar | CISCO-TCCiscoAlarmSeverity | .1.3.6.1.4.1.9.9.658.1.65 |
| csbQOSAlertPreviousLevel The previous threshold level of the measured object. The levels
are Major, Minor, Critical. | scalar | CISCO-TCCiscoAlarmSeverity | .1.3.6.1.4.1.9.9.658.1.66 |
| csbQOSNormalAlertCount This object represents the number of times this QOS object,
has entered normal level. | scalar | occurrences SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.658.1.67 |
| csbQOSMinorAlertCount This object represents number of times the QOS object, has
entered minor level. | scalar | occurrences SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.658.1.68 |
| csbQOSCriticalAlertCount This object represents the number of times the QOS object, has
entered critical level. | scalar | occurrences SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.658.1.69 |
| csbSrcAlertVdbeId This MIB object represents the name of the virtual media
gateway. The length of this object will be zero if the virtual
media gateway is not defined. | scalar | OctetString | .1.3.6.1.4.1.9.9.658.1.7 |
| csbQOSMajorAlertCount This object represents number the of times the QOS object, has
entered major level. | scalar | occurrences SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.658.1.70 |
| csbQOSAlertType This object represents that the value of QOS parameter is
applicable at which scope. QOS parameters can be calculated
both at global as well as adjacency scope. | scalar | CsbQOSAlertScopeType | .1.3.6.1.4.1.9.9.658.1.71 |
| csbQOSAlertSummaryPeriod This object indicates the interval for which the periodic
statistics information is to be displayed. The interval
values can be 5 min, 15 mins, 1 hour or 1 day. | scalar | CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIBCiscoSbcPeriodicStatsInterval | .1.3.6.1.4.1.9.9.658.1.72 |
| csbQOSAlertUnansweredCallRatioNotifEnabled The Unanswered Call Ratio notification truth value.
'true' - Indicates that csbQOSUnansweredCallRatioEvent
notification is to be generated when the state changes. That is,
the not… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.73 |
| csbQOSAlertPercentPktDropNotifEnabled The percent media packet drop notification truth value.
'true' - Indicates that csbQOSPercentPktDropEvent notification
is to be generated when the state changes. That is, the
noti… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.74 |
| csbQOSAlertRoundTripDelayNotifEnabled The round trip delay notification truth value.
'true' - Indicates that csbQOSRoundTripDelayEvent notification
is to be generated when the state changes. That is, the
notification … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.75 |
| csbQOSAlertMoscqeNotifEnabled The moscqe notification truth value.
'true' - Indicates that csbQOSMoscqeEvent notification is to be
generated when the state changes. That is, the notification
generation is enab… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.76 |
| csbQOSAlertLocalJitterNotifEnabled The remote media packet jitter notification truth value.
'true' - Indicates that csbQOSLocalJitterEvent notification is
to be generated when the state changes. That is, the
notifi… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.77 |
| csbQOSAlertRemoteJitterNotifEnabled The remote media packet jitter notification truth value.
'true' - Indicates that csbQOSRemoteJitterEvent notification is
to be generated when the state changes. That is, the
notif… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.78 |
| csbQOSAlertPercentPktLostNotifEnabled The percent media packet drop notification truth value.
'true' - Indicates that csbQOSPercentPktLostEvent notification
is to be generated when the state changes. That is, the
noti… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.658.1.79 |
| csbSrcAlertGateId This MIB object represents the context identifier for a
particular SIP/H.248 call flow. The context identifier for each
call is unique. The context identifier is also called as ga… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.658.1.8 |
| csbSrcAlertFlowPairId This MIB object represents the stream identifier given to a
particular SIP/H.248 call flow. The stream identifier for each
call is unique. The stream identifier is also called as … | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.658.1.9 |