ciscoScsiLuPeripheralType
CISCO-SCSI-MIB ·
.1.3.6.1.4.1.9.10.95.1.5.1.1.7
Object
column
SNMPv2-SMIUnsigned32
This object is the value returned to SCSI query VPD page 83. It can be: direct-access device, sequential-access device, printer, communication device and so on. The values that can be returned here are defined in SCSI Primary Commands -2 .
Context
- MIB
- CISCO-SCSI-MIB
- OID
.1.3.6.1.4.1.9.10.95.1.5.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ciscoScsiLuEntry
- Table
- ciscoScsiLuTable
- Siblings
- 14
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoScsiLuIndex An administrative integer used to uniquely identify a
particular logical unit. | column | ScsiIndexValue | .1.3.6.1.4.1.9.10.95.1.5.1.1.1 |
| ciscoScsiLuInCommands This object represents the number of commands received by
this logical unit. | column | commands SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.95.1.5.1.1.10 |
| ciscoScsiLuReadMegaBytes This object represents the amount of data in Megabytes read
from this logical unit. | column | Megabytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.95.1.5.1.1.11 |
| ciscoScsiLuWrittenMegaBytes This object represents the amount of data in Megabytes
written by this logical unit. | column | Megabytes SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.95.1.5.1.1.12 |
| ciscoScsiLuInResets This object represents the number of resets received by
this logical unit. | column | resets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.95.1.5.1.1.13 |
| ciscoScsiLuOutQueueFullStatus This object represents the number of queue full statuses
received by this logical unit. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.95.1.5.1.1.14 |
| ciscoScsiLuHSInCommands This object represents the number of commands received by
this logical unit. This object provides support for systems
that can quickly generate lots of commands because they run… | column | commands SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.10.95.1.5.1.1.15 |
| ciscoScsiLuDefaultLun The default Logical Unit Number (LUN) for this logical unit; it
is the LUN that will appear to an initiator that was not
configured to see another LUN.
Note that this object w… | column | ScsiLUNOrZero | .1.3.6.1.4.1.9.10.95.1.5.1.1.2 |
| ciscoScsiLuWwnName The World-Wide Name of this LU. | column | ScsiNameIdOrZero | .1.3.6.1.4.1.9.10.95.1.5.1.1.3 |
| ciscoScsiLuVendorId A string identifying the vendor of this LU according to the
value in SCSI device page. | column | OctetString | .1.3.6.1.4.1.9.10.95.1.5.1.1.4 |
| ciscoScsiLuProductId A string identifying the product for this LU according to the
value in SCSI device page. | column | OctetString | .1.3.6.1.4.1.9.10.95.1.5.1.1.5 |
| ciscoScsiLuRevisionId A string defining the product revision of this LU according to
the value in SCSI device page. | column | OctetString | .1.3.6.1.4.1.9.10.95.1.5.1.1.6 |
| ciscoScsiLuStatus The status of this logical unit:
- unknown(1): The status of this logical unit cannot be
determined.
- available(2): The logical unit is fully operational (i.e.,
accepts med… | column | Enumeration | .1.3.6.1.4.1.9.10.95.1.5.1.1.8 |
| ciscoScsiLuState According the bit position:
0 Data lost: Within the logical unit data has been lost.
1 Dynamic reconfiguration in progress: The logical unit is
being reconfigured. In this st… | column | Bits | .1.3.6.1.4.1.9.10.95.1.5.1.1.9 |