ciscoScsiFlowBufCount
CISCO-SCSI-FLOW-MIB ·
.1.3.6.1.4.1.9.9.447.1.1.2.1.8
Object
column
r/w
Unsigned32
The value of this object is relevant only if the corresponding instance of ciscoScsiFlowWriteAcc has been set to 'true'. It specifies the number of buffers to be used for write-acceleration.
Context
- MIB
- CISCO-SCSI-FLOW-MIB
- OID
.1.3.6.1.4.1.9.9.447.1.1.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ciscoScsiFlowEntry
- Table
- ciscoScsiFlowTable
- Siblings
- 14
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoScsiFlowId This object represents the flow identifier. | column | Unsigned32 | .1.3.6.1.4.1.9.9.447.1.1.2.1.1 |
| ciscoScsiFlowClearStats This object assists in clearing the statistics
for this flow.
If this object is set to 'clear(1)', it results
in all statistics for this flow being cleared.
… | column | Enumeration | .1.3.6.1.4.1.9.9.447.1.1.2.1.10 |
| ciscoScsiFlowIntrVrfStatus The verification status of the initiator
device corresponding to the SCSI Flow. | column | CSFlowVerifyReasonCode | .1.3.6.1.4.1.9.9.447.1.1.2.1.11 |
| ciscoScsiFlowTgtVrfStatus The verification status of the target
device corresponding to the SCSI Flow. | column | CSFlowVerifyReasonCode | .1.3.6.1.4.1.9.9.447.1.1.2.1.12 |
| ciscoScsiFlowIntrLCStatus The status of the linecard where the SCSI Flow
initiator device is located. | column | CSFlowVerifyReasonCode | .1.3.6.1.4.1.9.9.447.1.1.2.1.13 |
| ciscoScsiFlowTgtLCStatus The status of the linecard where the SCSI Flow
target device is located. | column | CSFlowVerifyReasonCode | .1.3.6.1.4.1.9.9.447.1.1.2.1.14 |
| ciscoScsiFlowRowStatus The status of this conceptual row.
When creating an entry in this table, the
management application MUST set values for the
corresponding instances of ciscoScsiFlow… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.447.1.1.2.1.15 |
| ciscoScsiFlowIntrWwn This object represents the pWWN of the
Initiator in the flow. This object must
be set to a valid value before or
concurrently setting the corresponding
instance of ciscoScsiFlowRo… | column | CISCO-ST-TCFcNameId | .1.3.6.1.4.1.9.9.447.1.1.2.1.2 |
| ciscoScsiFlowTargetWwn This object represents the pWWN of the
Target in the flow. This object must
be set to a valid value before or
concurrently setting the corresponding
instance of ciscoScsiFlowRowSt… | column | CISCO-ST-TCFcNameId | .1.3.6.1.4.1.9.9.447.1.1.2.1.3 |
| ciscoScsiFlowIntrVsan The VSAN ID of the initiator on which the flow
is configured. | column | CISCO-ST-TCVsanIndex | .1.3.6.1.4.1.9.9.447.1.1.2.1.4 |
| ciscoScsiFlowTargetVsan The VSAN ID of the target on which the flow
is configured. | column | CISCO-ST-TCVsanIndex | .1.3.6.1.4.1.9.9.447.1.1.2.1.5 |
| ciscoScsiFlowAllLuns If this object is set to 'true', it specifies
that all the LUNs on the target are to be
included in the flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.447.1.1.2.1.6 |
| ciscoScsiFlowWriteAcc This object specifies if write-acceleration
feature is enabled for this flow. If set to
'true' it is enabled. If set to 'false', it
is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.447.1.1.2.1.7 |
| ciscoScsiFlowStatsEnabled This object specifies if the statistics
gathering needs to be enabled for this flow.
If it is set to 'true', then it is enabled.
If it is set to 'false', then it is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.447.1.1.2.1.9 |