cRfSupSysSwitchoverTime
CISCO-RF-SUPPLEMENTAL-MIB ·
.1.3.6.1.4.1.9.9.198.1.1.2
Object
scalar
SNMPv2-TCDateAndTime
The date and time when the last CPU switchover took place. This object will remain uninstantiated if no switchovers have taken place since the current Active CPU was initialized.
Context
- MIB
- CISCO-RF-SUPPLEMENTAL-MIB
- OID
.1.3.6.1.4.1.9.9.198.1.1.2- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cRfSupSystem
- Siblings
- 17
Values & Constraints
Type Constraints
range: 8
range: 11
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cRfSupSysAvailableStartTime The date and time when this system began providing
uninterrupted operation. This includes the time while either
redundant unit was Active, but may also include brief intervals
d… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.1 |
| cRfSupSysBootImageSyncTime The date and time when the boot image memory was last
successfully synced from the current Active unit to the
Standby unit(s).
This object will remain uninstantiated … | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.10 |
| cRfSupSysBootImageAdmin Enables/Disables automatic boot image memory syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send the
f… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.11 |
| cRfSupSysBootImageOper The current operational state of boot image memory syncs.
When the value inSync is returned, it indicates that
Standby boot image memory is being actively mirrored from
the Activ… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.12 |
| cRfSupSysStandbyBootFile Allow Standby unit(s) to automatically load a boot image
which differs from the image specified for the Active unit.
The string should be of the form <device>:<filename>.
Speci… | scalar | OctetString | .1.3.6.1.4.1.9.9.198.1.1.13 |
| cRfSupNotificationsEnabled This specifies whether ciscoRfSupTimeChangeEvent,
ciscoRfSupTimeZoneChangeEvent notifications shall be sent
when the system's clock or time zone is changed causing
a change in th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.198.1.1.14 |
| cRfSupSysIfCounterSync This object configures the synchronization of Interface
Statistics information from Active CPU to the
Standby CPU.
When this object is set to 'true', synchronization is
enabled. W… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.198.1.1.15 |
| cRfSupSysFailureReason This object represents the reason code for a generic
failure between Active and redundant unit. The generic failure
can be a sync failure, upload and download issue.
Failure reaso… | scalar | OctetString | .1.3.6.1.4.1.9.9.198.1.1.16 |
| cRfSupSysSeverity This object represents the severity for a generic
failure between Active and redundant unit. The generic
failure can be a sync failure, upload and download issue.
critical - Crit… | scalar | Enumeration | .1.3.6.1.4.1.9.9.198.1.1.17 |
| cRfSupSysErrorType This object represents the error type for a generic
failure between Active and redundant unit. The generic
failure can be a sync failure, upload and download issue.
Notification … | scalar | Enumeration | .1.3.6.1.4.1.9.9.198.1.1.18 |
| cRfSupSysSwitchovers The number of times that switchovers have occurred since
cRfSupSysAvailableStartTime.
This object will remain uninstantiated if no switchovers have
taken place since t… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.198.1.1.3 |
| cRfSupSysRunningConfigSyncTime The date and time when the running configuration was last
successfully synced from the current Active unit to the
Standby unit.
This object will remain uninstantiated… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.4 |
| cRfSupSysRunningConfigAdmin Enables/Disables automatic running configuration syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send th… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.5 |
| cRfSupSysRunningConfigOper The current operational state of running configuration syncs.
When the value inSync is returned, it indicates that the
Standby running configuration is being kept actively in syn… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.6 |
| cRfSupSysStartupConfigSyncTime The date and time when the startup configuration was last
successfully synced from the current Active unit to the
Standby unit(s).
This object will remain uninstantia… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.7 |
| cRfSupSysStartupConfigAdmin Enables/Disables automatic startup configuration syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send th… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.8 |
| cRfSupSysStartupConfigOper The current operational state of startup configuration syncs.
When the value inSync is returned, it indicates that the
Standby startup configuration is being kept actively in syn… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.9 |