cRfSupSysStandbyBootFile
CISCO-RF-SUPPLEMENTAL-MIB ·
.1.3.6.1.4.1.9.9.198.1.1.13
Object
scalar
r/w
OctetString
Allow Standby unit(s) to automatically load a boot image
which differs from the image specified for the Active unit.
The string should be of the form <device>:<filename>.
Specifying a null value indicates that Standby unit(s) should
not use a different image than the Active unit.
This is used during software upgrade/downgrade procedures,
for platforms that support automatic syncs for boot image
memory.
Context
- MIB
- CISCO-RF-SUPPLEMENTAL-MIB
- OID
.1.3.6.1.4.1.9.9.198.1.1.13- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cRfSupSystem
- Siblings
- 17
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cRfSupSysAvailableStartTime The date and time when this system began providing
uninterrupted operation. This includes the time while either
redundant unit was Active, but may also include brief intervals
d… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.1 |
| cRfSupSysBootImageSyncTime The date and time when the boot image memory was last
successfully synced from the current Active unit to the
Standby unit(s).
This object will remain uninstantiated … | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.10 |
| cRfSupSysBootImageAdmin Enables/Disables automatic boot image memory syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send the
f… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.11 |
| cRfSupSysBootImageOper The current operational state of boot image memory syncs.
When the value inSync is returned, it indicates that
Standby boot image memory is being actively mirrored from
the Activ… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.12 |
| cRfSupNotificationsEnabled This specifies whether ciscoRfSupTimeChangeEvent,
ciscoRfSupTimeZoneChangeEvent notifications shall be sent
when the system's clock or time zone is changed causing
a change in th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.198.1.1.14 |
| cRfSupSysIfCounterSync This object configures the synchronization of Interface
Statistics information from Active CPU to the
Standby CPU.
When this object is set to 'true', synchronization is
enabled. W… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.198.1.1.15 |
| cRfSupSysFailureReason This object represents the reason code for a generic
failure between Active and redundant unit. The generic failure
can be a sync failure, upload and download issue.
Failure reaso… | scalar | OctetString | .1.3.6.1.4.1.9.9.198.1.1.16 |
| cRfSupSysSeverity This object represents the severity for a generic
failure between Active and redundant unit. The generic
failure can be a sync failure, upload and download issue.
critical - Crit… | scalar | Enumeration | .1.3.6.1.4.1.9.9.198.1.1.17 |
| cRfSupSysErrorType This object represents the error type for a generic
failure between Active and redundant unit. The generic
failure can be a sync failure, upload and download issue.
Notification … | scalar | Enumeration | .1.3.6.1.4.1.9.9.198.1.1.18 |
| cRfSupSysSwitchoverTime The date and time when the last CPU switchover took place.
This object will remain uninstantiated if no switchovers have
taken place since the current Active CPU was initialized. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.2 |
| cRfSupSysSwitchovers The number of times that switchovers have occurred since
cRfSupSysAvailableStartTime.
This object will remain uninstantiated if no switchovers have
taken place since t… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.198.1.1.3 |
| cRfSupSysRunningConfigSyncTime The date and time when the running configuration was last
successfully synced from the current Active unit to the
Standby unit.
This object will remain uninstantiated… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.4 |
| cRfSupSysRunningConfigAdmin Enables/Disables automatic running configuration syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send th… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.5 |
| cRfSupSysRunningConfigOper The current operational state of running configuration syncs.
When the value inSync is returned, it indicates that the
Standby running configuration is being kept actively in syn… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.6 |
| cRfSupSysStartupConfigSyncTime The date and time when the startup configuration was last
successfully synced from the current Active unit to the
Standby unit(s).
This object will remain uninstantia… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.7 |
| cRfSupSysStartupConfigAdmin Enables/Disables automatic startup configuration syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send th… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.8 |
| cRfSupSysStartupConfigOper The current operational state of startup configuration syncs.
When the value inSync is returned, it indicates that the
Standby startup configuration is being kept actively in syn… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.9 |