cRfSupSysErrorType
CISCO-RF-SUPPLEMENTAL-MIB ·
.1.3.6.1.4.1.9.9.198.1.1.18
Object
scalar
Enumeration
This object represents the error type for a generic failure between Active and redundant unit. The generic failure can be a sync failure, upload and download issue. Notification will be sent if the object has a valid error type. A value of download-config indicates that, config download is failed. A value of download-code indicates that, code download is failed. A value of download-icon indicates that, icon download is failed. A value of download-image indicates that, image download is failed. A value of download-signature indicates that, signature download is failed. A value of download-webadmincert indicates that, webadmincert download is failed. A value of download-webauthcert indicates that, webauthcert download is failed. A value of download-webauthbundle indicates that, webauthbundle download is failed. A value of download-eapdevcert indicates that, eapdevcert download is failed. A value of download-eapcacert indicates that, eapcacert download is failed. A value of download-login-banner indicates that, login banner download is failed. A value of upload-config indicates that, config upload is failed. A value of upload-debug-file indicates that, debug file upload is failed. A value of upload-crashfile indicates that, crash file upload is failed. A value of upload-watchdog-crash-file indicates that, watchdog crash file upload is failed. A value of upload-panic-crash-file indicates that, panic crash file upload is failed. A value of upload-coredump indicates that, coredump upload is failed. A value of upload-errorlog indicates that, errorlog upload is failed. A value of upload-invalid-config indicates that, invalid config upload is failed. A value of upload-pac indicates that, pac upload is failed. A value of upload-radio-core-dump that, radio core dump upload is failed. A value of upload-ap-crash-data indicates that, ap crash data upload is failed. A value of upload-signature indicates that, signature upload is failed. A value of upload-systemtrace indicates that, system trace upload is failed. A value of upload-packet-capture indicates that, packet capture upload is failed. A value of upload-traplog indicates that, trap log upload is failed. A value of route-add indicates that, addition of route is failed. A value of route-del indicates that, deletion of route is failed. A value of interface-service-port indicates that, service port interface is failed. A value of reset indicates that, reset is failed. A value of other indicates that, other reason for failed. A value of config-sync-fail indicates that, config sync is failed. A value of peer-maintenance indicates that, maintenance of peer is failed. A value of peer-loss indicates that, peer connection losed. A value of rfTrapClearTemplist indicates that, rf trap clear temp list is failed.
Context
- MIB
- CISCO-RF-SUPPLEMENTAL-MIB
- OID
.1.3.6.1.4.1.9.9.198.1.1.18- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cRfSupSystem
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | download-config |
2 | download-code |
3 | download-icon |
4 | download-image |
5 | download-signature |
6 | download-webadmincert |
7 | download-webauthcert |
8 | download-webauthbundle |
9 | download-eapdevcert |
10 | download-eapcacert |
11 | download-login-banner |
12 | upload-config |
13 | upload-debug-file |
14 | upload-crashfile |
15 | upload-watchdog-crash-file |
16 | upload-panic-crash-file |
17 | upload-coredump |
18 | upload-errorlog |
19 | upload-invalid-config |
20 | upload-pac |
21 | upload-radio-core-dump |
22 | upload-ap-crash-data |
23 | upload-signature |
24 | upload-systemtrace |
25 | upload-packet-capture |
26 | upload-traplog |
27 | route-add |
28 | route-del |
29 | interface-service-port |
30 | reset |
31 | other |
32 | config-sync-fail |
33 | peer-maintenance |
34 | peer-loss |
35 | rfTrapClearTemplist |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cRfSupSysAvailableStartTime The date and time when this system began providing
uninterrupted operation. This includes the time while either
redundant unit was Active, but may also include brief intervals
d… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.1 |
| cRfSupSysBootImageSyncTime The date and time when the boot image memory was last
successfully synced from the current Active unit to the
Standby unit(s).
This object will remain uninstantiated … | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.10 |
| cRfSupSysBootImageAdmin Enables/Disables automatic boot image memory syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send the
f… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.11 |
| cRfSupSysBootImageOper The current operational state of boot image memory syncs.
When the value inSync is returned, it indicates that
Standby boot image memory is being actively mirrored from
the Activ… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.12 |
| cRfSupSysStandbyBootFile Allow Standby unit(s) to automatically load a boot image
which differs from the image specified for the Active unit.
The string should be of the form <device>:<filename>.
Speci… | scalar | OctetString | .1.3.6.1.4.1.9.9.198.1.1.13 |
| cRfSupNotificationsEnabled This specifies whether ciscoRfSupTimeChangeEvent,
ciscoRfSupTimeZoneChangeEvent notifications shall be sent
when the system's clock or time zone is changed causing
a change in th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.198.1.1.14 |
| cRfSupSysIfCounterSync This object configures the synchronization of Interface
Statistics information from Active CPU to the
Standby CPU.
When this object is set to 'true', synchronization is
enabled. W… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.198.1.1.15 |
| cRfSupSysFailureReason This object represents the reason code for a generic
failure between Active and redundant unit. The generic failure
can be a sync failure, upload and download issue.
Failure reaso… | scalar | OctetString | .1.3.6.1.4.1.9.9.198.1.1.16 |
| cRfSupSysSeverity This object represents the severity for a generic
failure between Active and redundant unit. The generic
failure can be a sync failure, upload and download issue.
critical - Crit… | scalar | Enumeration | .1.3.6.1.4.1.9.9.198.1.1.17 |
| cRfSupSysSwitchoverTime The date and time when the last CPU switchover took place.
This object will remain uninstantiated if no switchovers have
taken place since the current Active CPU was initialized. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.2 |
| cRfSupSysSwitchovers The number of times that switchovers have occurred since
cRfSupSysAvailableStartTime.
This object will remain uninstantiated if no switchovers have
taken place since t… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.198.1.1.3 |
| cRfSupSysRunningConfigSyncTime The date and time when the running configuration was last
successfully synced from the current Active unit to the
Standby unit.
This object will remain uninstantiated… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.4 |
| cRfSupSysRunningConfigAdmin Enables/Disables automatic running configuration syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send th… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.5 |
| cRfSupSysRunningConfigOper The current operational state of running configuration syncs.
When the value inSync is returned, it indicates that the
Standby running configuration is being kept actively in syn… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.6 |
| cRfSupSysStartupConfigSyncTime The date and time when the startup configuration was last
successfully synced from the current Active unit to the
Standby unit(s).
This object will remain uninstantia… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.9.9.198.1.1.7 |
| cRfSupSysStartupConfigAdmin Enables/Disables automatic startup configuration syncs only.
Doesn't affect other types of sync activity. If set to the
default value enableAutoSync, the Active unit will send th… | scalar | RfSupSyncAdminState | .1.3.6.1.4.1.9.9.198.1.1.8 |
| cRfSupSysStartupConfigOper The current operational state of startup configuration syncs.
When the value inSync is returned, it indicates that the
Standby startup configuration is being kept actively in syn… | scalar | RfSupSyncOperState | .1.3.6.1.4.1.9.9.198.1.1.9 |