cRFStatusPrimaryMode
CISCO-RF-MIB ·
.1.3.6.1.4.1.9.9.176.1.1.5
Object
scalar
SNMPv2-TCTruthValue
Indicates whether this is the primary redundant unit or
not. If this unit is the primary unit, this object is true. If
this unit is the secondary unit, this object is false.
Note that the terms 'primary/secondary' are not synonymous
with the terms 'active/standby'. At any given time, the
primary unit may be the active unit, or the primary unit may
be the standby unit. Likewise, the secondary unit, at any
given time, may be the active unit, or the secondary unit may
be the standby unit.
The primary unit is given a higher priority or precedence over
the secondary unit. In a race condition (usually at
initialization time) or any situation where the redundant
units are unable to successfully negotiate activity between
themselves, the primary unit will always become the active
unit and the secondary unit will fall back to standby. Only
one redundant unit can be the primary unit at any given time.
The algorithm for determining the primary unit is system
dependent, such as 'the redundant unit with the lower numeric
unit id is always the primary unit.'
Context
- MIB
- CISCO-RF-MIB
- OID
.1.3.6.1.4.1.9.9.176.1.1.5- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cRFStatus
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cRFStatusUnitId A unique identifier for this redundant unit. This identifier
is implementation-specific but the method for selecting the id
must remain consistent throughout the redundant system.… | scalar | RFUnitIdentifier | .1.3.6.1.4.1.9.9.176.1.1.1 |
| cRFStatusPeerStandByEntryTime The value of sysUpTime when the peer redundant unit entered the
standbyHot state. The value will be 0 on system initialization. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.176.1.1.10 |
| cRFStatusRFModeCapsTable This table containing a list of redundancy modes that can be
supported on the device. | table | - | .1.3.6.1.4.1.9.9.176.1.1.11 |
| cRFStatusIssuState deprecated The current ISSU state of the system. | scalar | RFIssuState | .1.3.6.1.4.1.9.9.176.1.1.12 |
| cRFStatusIssuStateRev1 The current ISSU state of the system. | scalar | RFIssuStateRev1 | .1.3.6.1.4.1.9.9.176.1.1.13 |
| cRFStatusIssuFromVersion The IOS version from with the user is upgrading | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.176.1.1.14 |
| cRFStatusIssuToVersion The IOS version to with the user is upgrading | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.176.1.1.15 |
| cRFStatusUnitState The current state of RF on this unit. | scalar | RFState | .1.3.6.1.4.1.9.9.176.1.1.2 |
| cRFStatusPeerUnitId A unique identifier for the redundant peer unit. This
identifier is implementation-specific but the method for
selecting the id must remain consistent throughout the
redundant sys… | scalar | RFUnitIdentifier | .1.3.6.1.4.1.9.9.176.1.1.3 |
| cRFStatusPeerUnitState The current state of RF on the peer unit. | scalar | RFState | .1.3.6.1.4.1.9.9.176.1.1.4 |
| cRFStatusDuplexMode Indicates whether the redundant peer unit has been detected
or not. If the redundant peer unit is detected, this object is
true. If the redundant peer unit is not detected, this o… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.176.1.1.6 |
| cRFStatusManualSwactInhibit Indicates whether a manual switch of activity is
permitted. If a manual switch of activity is allowed, this
object is false. If a manual switch of activity is not
allowed, this ob… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.176.1.1.7 |
| cRFStatusLastSwactReasonCode The reason for the last switch of activity. | scalar | RFSwactReasonType | .1.3.6.1.4.1.9.9.176.1.1.8 |
| cRFStatusFailoverTime The value of sysUpTime when the primary redundant unit took over
as active. The value of this object will be 0 till the first
switchover. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.176.1.1.9 |