cRFCfgMaintenanceMode

CISCO-RF-MIB · .1.3.6.1.4.1.9.9.176.1.2.13
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
Indicates whether redundant units may communicate
synchronization messages with each other. If communication is
not permitted, this object is set to 'true'. If communication
is permitted, this object is set to 'false'.
          
If the value of this object is 'true', the redundant system is
considered to be in a maintenance mode of operation. If the
value of this object is 'false', the redundant system is
considered to be in a normal (non-maintenance) mode of
operation.
          
In maintenance mode (true), the active unit will not
communicate with the standby unit. The standby unit
progression will not occur. When maintenance mode is disabled
(false), the standby unit is reset to recover.
          
Maintenance mode (true) is useful for maintenance-type
operations.

Context

MIB
CISCO-RF-MIB
OID
.1.3.6.1.4.1.9.9.176.1.2.13
Type
scalar
Access
readwrite
Status
current
Parent
cRFCfg
Siblings
15

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cRFCfgSplitMode deprecated
Indicates whether redundant units may communicate synchronization messages with each other. If communication is not permitted, this object is set to true. If communication is perm…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.176.1.2.1
cRFCfgNotifTimerMax
The maximum acceptable value for the cRFCfgNotifTimer object.
scalarmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.10
cRFCfgAdminAction
This variable is set to invoke RF subsystem action commands. The commands are useful for maintenance and software upgrade activities.
scalarRFAction.1.3.6.1.4.1.9.9.176.1.2.11
cRFCfgNotifsEnabled
Allows enabling/disabling of RF subsystem notifications.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.176.1.2.12
cRFCfgRedundancyMode
Indicates the redundancy mode configured on the device.
scalarRFMode.1.3.6.1.4.1.9.9.176.1.2.14
cRFCfgRedundancyModeDescr
Further clarifies or describes the redundancy mode indicated by cRFCfgRedundancyMode. Implementation-specific terminology associated with the current redundancy mode may be presen…
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.176.1.2.15
cRFCfgRedundancyOperMode
Indicate the operational redundancy mode of the device.
scalarRFMode.1.3.6.1.4.1.9.9.176.1.2.16
cRFCfgKeepaliveThresh
On platforms that support keep-alives, the keep-alive threshold value designates the number of lost keep-alives tolerated before a failure condition is declared. If this occurs, a…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.2
cRFCfgKeepaliveThreshMin
The minimum acceptable value for the cRFCfgKeepaliveThresh object.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.3
cRFCfgKeepaliveThreshMax
The maximum acceptable value for the cRFCfgKeepaliveThresh object.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.4
cRFCfgKeepaliveTimer
On platforms that support keep-alives, the keep-alive timer value is used to guard against lost keep-alives. The RF subsystem expects to receive a keep-alive within this period. I…
scalarmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.5
cRFCfgKeepaliveTimerMin
The minimum acceptable value for the cRFCfgKeepaliveTimer object.
scalarmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.6
cRFCfgKeepaliveTimerMax
The maximum acceptable value for the cRFCfgKeepaliveTimer object.
scalarmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.7
cRFCfgNotifTimer
Note that the term 'notification' here refers to an RF notification and not an SNMP notification. As the standby unit progresses to the 'standbyHot' state, asynchronous…
scalarmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.8
cRFCfgNotifTimerMin
The minimum acceptable value for the cRFCfgNotifTimer object.
scalarmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.176.1.2.9