cRFCfgKeepaliveThresh
CISCO-RF-MIB ·
.1.3.6.1.4.1.9.9.176.1.2.2
Object
On platforms that support keep-alives, the keep-alive
threshold value designates the number of lost keep-alives
tolerated before a failure condition is declared. If this
occurs, a SWACT notification is sent.
On platforms that do not support keep-alives, this object has
no purpose or effect.
Context
- MIB
- CISCO-RF-MIB
- OID
.1.3.6.1.4.1.9.9.176.1.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cRFCfg
- Siblings
- 15
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cRFCfgSplitMode deprecated Indicates whether redundant units may communicate
synchronization messages with each other. If communication is
not permitted, this object is set to true. If communication is
perm… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.176.1.2.1 |
| cRFCfgNotifTimerMax The maximum acceptable value for the cRFCfgNotifTimer
object. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.10 |
| cRFCfgAdminAction This variable is set to invoke RF subsystem action commands.
The commands are useful for maintenance and software upgrade
activities. | scalar | RFAction | .1.3.6.1.4.1.9.9.176.1.2.11 |
| cRFCfgNotifsEnabled Allows enabling/disabling of RF subsystem notifications. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.176.1.2.12 |
| cRFCfgMaintenanceMode Indicates whether redundant units may communicate
synchronization messages with each other. If communication is
not permitted, this object is set to 'true'. If communication
is pe… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.176.1.2.13 |
| cRFCfgRedundancyMode Indicates the redundancy mode configured on the device. | scalar | RFMode | .1.3.6.1.4.1.9.9.176.1.2.14 |
| cRFCfgRedundancyModeDescr Further clarifies or describes the redundancy mode indicated
by cRFCfgRedundancyMode. Implementation-specific terminology
associated with the current redundancy mode may be presen… | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.176.1.2.15 |
| cRFCfgRedundancyOperMode Indicate the operational redundancy mode of the device. | scalar | RFMode | .1.3.6.1.4.1.9.9.176.1.2.16 |
| cRFCfgKeepaliveThreshMin The minimum acceptable value for the cRFCfgKeepaliveThresh
object. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.3 |
| cRFCfgKeepaliveThreshMax The maximum acceptable value for the cRFCfgKeepaliveThresh
object. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.4 |
| cRFCfgKeepaliveTimer On platforms that support keep-alives, the keep-alive timer
value is used to guard against lost keep-alives. The RF
subsystem expects to receive a keep-alive within this period.
I… | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.5 |
| cRFCfgKeepaliveTimerMin The minimum acceptable value for the cRFCfgKeepaliveTimer
object. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.6 |
| cRFCfgKeepaliveTimerMax The maximum acceptable value for the cRFCfgKeepaliveTimer
object. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.7 |
| cRFCfgNotifTimer Note that the term 'notification' here refers to an RF
notification and not an SNMP notification.
As the standby unit progresses to the 'standbyHot' state,
asynchronous… | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.8 |
| cRFCfgNotifTimerMin The minimum acceptable value for the cRFCfgNotifTimer
object. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.176.1.2.9 |