ciscoRptrPortSrcAddrCtrl
CISCO-REPEATER-MIB ·
.1.3.6.1.4.1.9.9.22.1.1.1.6
Object
Specifies whether or not the Source Address Control feature is
enabled for the port. This feature provides the ability to
control which device's specific MAC address is allowed access
to the network. If the management entity specified an address
via ciscoRptrPortAllowedSrcAddr, only the device with the
configured MAC address is allowed access to the network. If
the management entity does not specified an address, the
allowed source address is learned from the last source address
if valid; otherwise, the allowed source address is learned from
the MAC address of the first valid packet detected on the port.
When another MAC address other than the allowed source address
is detected on the port, the port is partitioned.
WARNING: Configuring Source Address Control feature on the
port which is used for management can cause the management
entity to lose access to the agent if the management's source
address does not match the allowed source address.
Context
- MIB
- CISCO-REPEATER-MIB
- OID
.1.3.6.1.4.1.9.9.22.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ciscoRptrPortEntry
- Table
- ciscoRptrPortTable
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoRptrPortMDIStatus This object indicates the port's MDI/MDI-X switching status.
The normal(1) status indicates the port is configured to be
standard MDI as defined by the 10BaseT Standard for hub… | column | Enumeration | .1.3.6.1.4.1.9.9.22.1.1.1.1 |
| ciscoRptrPortIllegalAddrTrapAcked Specifies whether an acknowledgment is sent by an NMS to
indicate that an illegal source address trap was
received.
acked :
Set by a NMS to acknowledge reception of an… | column | Enumeration | .1.3.6.1.4.1.9.9.22.1.1.1.10 |
| ciscoRptrPortIllegalAddrTrapEnabled Specifies whether or not to send the illegal source
address trap for the port.
When it is enabled, one or more illegal source address
traps will be generated if t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.22.1.1.1.11 |
| ciscoRptrPortIllegalAddrFirstHeard This is the time stamp for the very first time when
the current illegal source address was detected on the
port. The time stamp is given by the value of MIB-II's
sysUpTime at wh… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.22.1.1.1.12 |
| ciscoRptrPortIllegalAddrLastHeard This is the time stamp for the last time when the
current illegal source address was detected on the
port. The time stamp is given by the value of MIB-II's
sysUpTime at which o… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.22.1.1.1.13 |
| ciscoRptrPortLastIllegalAddrCount This is the count of consecutive occurrences of
the last illegal source address on the port.
When illegal address is detected, this count
will be incremented about every minute. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.22.1.1.1.14 |
| ciscoRptrPortIllegalAddrTotalCount This is the total count of all cccurences of any
illegal source addresses heard on the port since start-up.
Note: Illegal source addresses may be different, may be … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.22.1.1.1.15 |
| ciscoRptrPortLinkTestEnabled Specifies whether or not Link Integrity Test Function is
enabled for the port as specified by the 10BaseT Standard.
When the link test function is enabled, the absence of the
L… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.22.1.1.1.2 |
| ciscoRptrPortLinkTestFailed This object indicates the status of the Link Test function
for the port. Set to false indicates valid data or 4
consecutive Link Test pulses have been detected on the
port. Set… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.22.1.1.1.3 |
| ciscoRptrPortAutoPolarityEnabled Specifies whether or not the Automatic Receiver Polarity
Reversal is enabled for the port. This feature provides the
ability to invert the polarity of the signals appearing at … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.22.1.1.1.4 |
| ciscoRptrPortAutoPolarityCorrected This object indicates the status of the Automatic Receiver
Polarity Reversal for the port. Set to true indicates the
polarity of the port has been detected as reversed and is
cor… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.22.1.1.1.5 |
| ciscoRptrPortAllowedSrcAddr For write access, this object is the allowed source address
that is to be configured for source address control feature
for the port.
For read access, if no allow… | column | OctetString | .1.3.6.1.4.1.9.9.22.1.1.1.7 |
| ciscoRptrPortAllowedSrcAddrStatus This object indicates the status of ciscoRptrPortAllowedSrcAddr
for the port. allowedSrcAddrConfig(1) status indicates that
the allowed source address was explicitly configured … | column | Enumeration | .1.3.6.1.4.1.9.9.22.1.1.1.8 |
| ciscoRptrPortLastIllegalSrcAddr This object is the last illegal source address which caused
this port to be partitioned. If the port is never partitioned
due to Source Address Control, the agent shall return a… | column | OctetString | .1.3.6.1.4.1.9.9.22.1.1.1.9 |