cPppoeSystemSessionLossThreshold
CISCO-PPPOE-MIB ·
.1.3.6.1.4.1.9.9.194.1.1.13
Object
This object is used to monitor number of active PPPoE sessions above a healthy watermark. If number of PPPoE sessions falls below this watermark then we can expect something wrong happened. So we send out trap to user indicating session loss below watermark.
Context
- MIB
- CISCO-PPPOE-MIB
- OID
.1.3.6.1.4.1.9.9.194.1.1.13- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cPppoeSystemSessionInfo
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cPppoeSystemCurrSessions The current number of active PPPoE sessions within
this system. | scalar | sessions SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.194.1.1.1 |
| cPppoeSystemPerVLANthrottleRatelimit This object provides the rate limit at which PPPoE
session were created on a Vlan. During a configured
time interval once the number of new session requests
coming on a particul… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.10 |
| cPppoeSystemPerVClimit This object provides limit on number of PPPoE sessions on
a particular ATM-VC. If the limit is reached new session
request on this VC would be denied. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.11 |
| cPppoeSystemPerVCThrottleRatelimit This object provides the rate limit at which PPPoE
session were created on an ATM-VC. During a configured
time interval, once the number of new session requests
coming on an AT… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.12 |
| cPppoeSystemSessionLossPercent This object is used to monitor the percentage of PPPoE
sessions going down at a configured time interval.
During a time interval if percentage of PPPoE sessions
lo… | scalar | CISCO-QOS-PIB-MIBPercent | .1.3.6.1.4.1.9.9.194.1.1.14 |
| cPppoeSystemHighWaterSessions The high water mark of the established PPPoE
sessions since the system was initialized. | scalar | sessions SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.194.1.1.2 |
| cPppoeSystemMaxAllowedSessions Maximum number of allowed PPPoE sessions within
the system. | scalar | sessions SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.3 |
| cPppoeSystemThresholdSessions Threshold value of the established PPPoE sessions
within the system. Default value is equal to
cPppoeSystemMaxSessionsConfigurable | scalar | sessions SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.4 |
| cPppoeSystemExceededSessionErrors The accumulated number of errors for
establishing PPPoE session in the system due
to the cPppoeSystemCurrSessions value exceeds
the cPppoeSystemMaxAllowedSessions value. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.194.1.1.5 |
| cPppoeSystemPerMacSessionlimit This object provides limit on number of PPPoE sessions
for a single client Ethernet MAC address. If the limit
is reached new session request from the client would
be denied | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.6 |
| cPppoeSystemPerMacIWFSessionlimit This object provides limit on number of PPPoE sessions
with interworking flag(IWF) enabled, from a single client
MAC address. If the limit is reached new session request
would b… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.7 |
| cPppoeSystemPerMacThrottleRatelimit This object provides the rate limit at which PPPoE
session were created from a single client MAC address.
During a configured time interval, once the number of
new session requ… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.8 |
| cPppoeSystemPerVLANlimit This object provides limit on number of PPPoE sessions
on a particular Vlan. If the limit is reached new session
request on this vlan would be denied. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.9 |