cPppoeSystemPerMacSessionlimit
CISCO-PPPOE-MIB ·
.1.3.6.1.4.1.9.9.194.1.1.6
Object
This object provides limit on number of PPPoE sessions for a single client Ethernet MAC address. If the limit is reached new session request from the client would be denied
Context
- MIB
- CISCO-PPPOE-MIB
- OID
.1.3.6.1.4.1.9.9.194.1.1.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cPppoeSystemSessionInfo
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cPppoeSystemCurrSessions The current number of active PPPoE sessions within
this system. | scalar | sessions SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.194.1.1.1 |
| cPppoeSystemPerVLANthrottleRatelimit This object provides the rate limit at which PPPoE
session were created on a Vlan. During a configured
time interval once the number of new session requests
coming on a particul… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.10 |
| cPppoeSystemPerVClimit This object provides limit on number of PPPoE sessions on
a particular ATM-VC. If the limit is reached new session
request on this VC would be denied. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.11 |
| cPppoeSystemPerVCThrottleRatelimit This object provides the rate limit at which PPPoE
session were created on an ATM-VC. During a configured
time interval, once the number of new session requests
coming on an AT… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.12 |
| cPppoeSystemSessionLossThreshold This object is used to monitor number of active PPPoE
sessions above a healthy watermark. If number of PPPoE
sessions falls below this watermark then we can expect
something wron… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.13 |
| cPppoeSystemSessionLossPercent This object is used to monitor the percentage of PPPoE
sessions going down at a configured time interval.
During a time interval if percentage of PPPoE sessions
lo… | scalar | CISCO-QOS-PIB-MIBPercent | .1.3.6.1.4.1.9.9.194.1.1.14 |
| cPppoeSystemHighWaterSessions The high water mark of the established PPPoE
sessions since the system was initialized. | scalar | sessions SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.194.1.1.2 |
| cPppoeSystemMaxAllowedSessions Maximum number of allowed PPPoE sessions within
the system. | scalar | sessions SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.3 |
| cPppoeSystemThresholdSessions Threshold value of the established PPPoE sessions
within the system. Default value is equal to
cPppoeSystemMaxSessionsConfigurable | scalar | sessions SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.4 |
| cPppoeSystemExceededSessionErrors The accumulated number of errors for
establishing PPPoE session in the system due
to the cPppoeSystemCurrSessions value exceeds
the cPppoeSystemMaxAllowedSessions value. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.194.1.1.5 |
| cPppoeSystemPerMacIWFSessionlimit This object provides limit on number of PPPoE sessions
with interworking flag(IWF) enabled, from a single client
MAC address. If the limit is reached new session request
would b… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.7 |
| cPppoeSystemPerMacThrottleRatelimit This object provides the rate limit at which PPPoE
session were created from a single client MAC address.
During a configured time interval, once the number of
new session requ… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.8 |
| cPppoeSystemPerVLANlimit This object provides limit on number of PPPoE sessions
on a particular Vlan. If the limit is reached new session
request on this vlan would be denied. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.194.1.1.9 |