cpeExtPsePortPwrAvailable
CISCO-POWER-ETHERNET-EXT-MIB ·
.1.3.6.1.4.1.9.9.402.1.2.1.8
Object
This object indicates the amount of power available for
the PD to use. This value may differ from the value
cpeExtPsePortPwrAllocated due to the efficiency issues
of delivering the power from the PSE to the PD.
When sufficient power is available to power a PD, this
value should be equal to the lower of the two objects,
cpeExtDefaultAllocation and cpeExtPsePortPwrMax.
Context
- MIB
- CISCO-POWER-ETHERNET-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.402.1.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- milliwatts
- Parent
- cpeExtPsePortEntry
- Table
- cpeExtPsePortTable
- Siblings
- 15
Syntax
milliwatts SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpeExtPsePortEnable This object is an extension of the pethPsePortAdminEnable
object from RFC3621. It allows the user to be more specific
when enabling the PSE functions. The states, 'auto', 'static'… | column | Enumeration | .1.3.6.1.4.1.9.9.402.1.2.1.1 |
| cpeExtPsePortMaxPwrDrawn This indicates the maximum amount of power drawn by the PD
connected to this interface, since it was powered on. | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.2.1.10 |
| cpeExtPsePortEntPhyIndex The entPhysicalIndex value that uniquely identifies the
PSE port. If the PSE port does not have a corresponding
physical entry in entPhysicalTable or if the
entPhysicalTable is … | column | CISCO-TCEntPhysicalIndexOrZero | .1.3.6.1.4.1.9.9.402.1.2.1.11 |
| cpeExtPsePortPolicingCapable This object indicates whether the PSE port hardware is
capable of policing the port for proper power consumption
based on the allocated value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.402.1.2.1.12 |
| cpeExtPsePortPolicingEnable This object allows the user to turn on or turn off the
power policing of the PSE port. If the instance value of
cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed
to set… | column | Enumeration | .1.3.6.1.4.1.9.9.402.1.2.1.13 |
| cpeExtPsePortPolicingAction This object specifies the power policing action that
the device will take on this PSE port when the real-time
power consumption exceeds its max power allocation if
the value of … | column | Enumeration | .1.3.6.1.4.1.9.9.402.1.2.1.14 |
| cpeExtPsePortPwrManAlloc This object specifies the manual power allocation that
the PSE will allocate to the PD connected to this
interface regardless of the amount requested via CDP
or IEEE.
… | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.2.1.15 |
| cpeExtPsePortCapabilities This object indicates the PSE functionality that
this port supports.
If the 'policing' BIT is set, then this PSE port is
capable of policing the port for proper pow… | column | Bits | .1.3.6.1.4.1.9.9.402.1.2.1.16 |
| cpeExtPsePortDiscoverMode This object indicates the discover mode used by the system to
discover the PD.
A value of 'unknown' indicates that the discover mode on the
interface is unknown.
… | column | Enumeration | .1.3.6.1.4.1.9.9.402.1.2.1.2 |
| cpeExtPsePortDeviceDetected This object indicates if a Powered Device (PD) has been
detected on the interface.
A value of 'true' indicates that a PD has been detected on
the interface.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.402.1.2.1.3 |
| cpeExtPsePortIeeePd This object indicates whether the Powered Device attached
to the interface is an IEEE compliant Powered Device or not.
A value of 'true' indicates the attached Powe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.402.1.2.1.4 |
| cpeExtPsePortAdditionalStatus This object is an extension of the pethPsePortDetectionStatus
object from RFC3621 and provides additional status
information.
deny: When set, the PD attached to the… | column | Bits | .1.3.6.1.4.1.9.9.402.1.2.1.5 |
| cpeExtPsePortPwrMax This indicates the maximum amount of power that the PSE will
make available to the PD connected to this interface. | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.2.1.6 |
| cpeExtPsePortPwrAllocated This object indicates the amount of power allocated from the
PSE for the PD. | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.2.1.7 |
| cpeExtPsePortPwrConsumption This indicates the actual power consumption of the PD
connected to this interface. It may not necessarily
be equal to the value of cpeExtPsePortPwrAvailable. | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.2.1.9 |