cpeExtPsePortLldpPdPwrPairsOrZero
CISCO-POWER-ETHERNET-EXT-MIB ·
.1.3.6.1.4.1.9.9.402.1.7.1.14
Object
column
Enumeration
This object indicates the pinout pairs in use received
from the remote PD via MDI TLV in LLDP Protocol.
'unknown' - information is not available
'signal' - the signal pairs are in use.
'spare' - the spare pairs are in use.
Context
- MIB
- CISCO-POWER-ETHERNET-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.402.1.7.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cpeExtPsePortLldpEntry
- Table
- cpeExtPsePortLldpTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | signal |
2 | spare |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpeExtPsePortLldpPwrType The DTE Power via MDI type of the local system (PSE). | column | CpeExtLldpPwrType | .1.3.6.1.4.1.9.9.402.1.7.1.1 |
| cpeExtPsePortLldpPdPwrAlloc The PSE allocated power value received from the
remote system (PD). | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.7.1.10 |
| cpeExtPsePortLldpPwrClass The PSE power classification sent to the remote PD via MDI TLV
in LLDP Protocol. | column | CpeExtLldpPwrClassOrZero | .1.3.6.1.4.1.9.9.402.1.7.1.11 |
| cpeExtPsePortLldpPdPwrClass This power classification received from the remote
system (PD). | column | CpeExtLldpPwrClassOrZero | .1.3.6.1.4.1.9.9.402.1.7.1.12 |
| cpeExtPsePortLldpPdPwrSupport This object indicates the power support mode received
from the remote PD via MDI TLV in LLDP protocol.
'portClass' - This bit is set if the port is
… | column | Bits | .1.3.6.1.4.1.9.9.402.1.7.1.13 |
| cpeExtPsePortLldpPdPwrType The DTE Power via MDI type of the remote system (PD). | column | CpeExtLldpPwrType | .1.3.6.1.4.1.9.9.402.1.7.1.2 |
| cpeExtPsePortLldpPwrSrc The power source of the local system (PSE). | column | CpeExtLldpPwrSrc | .1.3.6.1.4.1.9.9.402.1.7.1.3 |
| cpeExtPsePortLldpPdPwrSrc The power source of the remote system (PD). | column | CpeExtLldpPwrSrc | .1.3.6.1.4.1.9.9.402.1.7.1.4 |
| cpeExtPsePortLldpPwrPriority The power priority of the local system (PSE). | column | CpeExtPwrPriority | .1.3.6.1.4.1.9.9.402.1.7.1.5 |
| cpeExtPsePortLldpPdPwrPriority The power priority of the remote system (PD). | column | CpeExtPwrPriority | .1.3.6.1.4.1.9.9.402.1.7.1.6 |
| cpeExtPsePortLldpPwrReq The requested PD power value that the local
system (PSE) mirrors back to the remote system (PD). | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.7.1.7 |
| cpeExtPsePortLldpPdPwrReq The PD requested power value received from
the remote system (PD). | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.7.1.8 |
| cpeExtPsePortLldpPwrAlloc The PSE allocated power value for the remote
system (PD). | column | milliwatts SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.402.1.7.1.9 |