cooOtsOchControllerAlarmState
CISCO-OPTICAL-OTS-MIB ·
.1.3.6.1.4.1.9.9.834.1.1.3.1.12
Object
column
Bits
This object indicates the current alarms status of the Optics
layer.
Alarms description :
noDefect : No alarms
highRXPwr : Input optical power reading over the
fail-high threshold
highTXPwr : Output optical power reading over the
fail-high threshold
lowRXPwr : Input optical power reading below the
fail-low threshold
lowTXPwr : Output optical power reading below the
fail-low threshold
lospRXPwr : Loss of optical power signal
locRXPwr : Loss of optical continuity
degLowGain : Amplifier gain degrade low
degHighGain : Amplifier gain degrade high
alsAmp : Amplifier automatic laser shutdown for
safety reason
aprAmp : Amplifier automatic power reduction
noEqAutoAmp : Channels power not equalized for amplifier
automatic control mode
misAutoAmp : Misconfiguration for amplifier automatic
control mode
switchToProtect : Protected port switching to active role
Context
- MIB
- CISCO-OPTICAL-OTS-MIB
- OID
.1.3.6.1.4.1.9.9.834.1.1.3.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cooOtsOchControllerEntry
- Table
- cooOtsOchControllerTable
- Siblings
- 12
Syntax
Bits
Values & Constraints
Enumerated Values
0 | noDefect |
1 | highRXPwr |
2 | highTXPwr |
3 | lowRXPwr |
4 | lowTXPwr |
5 | lospRXPwr |
6 | locRXPwr |
7 | degLowGain |
8 | degHighGain |
9 | alsAmp |
10 | aprAmp |
11 | noEqAutoAmp |
12 | misAutoAmp |
13 | switchToProtect |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cooOtsOchControllerPortType This object represents the port type of the optical OTS-OCH interface. | column | CiscoOpticalOtsPortType | .1.3.6.1.4.1.9.9.834.1.1.3.1.1 |
| cooOtsOchControllerState This object represents the controller status of
optical OTS-OCH interfaces. | column | CiscoOpticalOtsState | .1.3.6.1.4.1.9.9.834.1.1.3.1.10 |
| cooOtsOchControllerTranspAdminState This object represents the transport administration status on
optical OTS-OCH interfaces. | column | CiscoOpticalOtsTranspAdminState | .1.3.6.1.4.1.9.9.834.1.1.3.1.11 |
| cooOtsOchControllerWidth This object represents the frequency on
optical Ots-Och channel interfaces (unit 1/10 GHz). | column | 1/10 GHz Unsigned32 | .1.3.6.1.4.1.9.9.834.1.1.3.1.13 |
| cooOtsOchControllerLaserStatus This object represents the current operational state of the
laser. | column | CiscoOpticalOtsLaserStatus | .1.3.6.1.4.1.9.9.834.1.1.3.1.2 |
| cooOtsOchControllerRXPower This object represents the receive power in
1/100 dBm on optical OTS-OCH interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.3.1.3 |
| cooOtsOchControllerTXPower This object represents the transmit power in
1/100 dBm on optical OTS-OCH interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.3.1.4 |
| cooOtsOchControllerRXLowThreshold This object is used to configure the receive low threshold in
1/100 dBm on optical OTS-OCH interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.3.1.5 |
| cooOtsOchControllerTXLowThreshold This object is used to configure the transmit low threshold in
1/100 dBm on optical OTS-OCH interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.3.1.6 |
| cooOtsOchControllerWavelength This object represents the wavelength on
optical OTS-OCH interfaces (unit 1/100 nm). | column | 1/100 nm CISCO-OPTICAL-MIBCoiOpticalWavelength | .1.3.6.1.4.1.9.9.834.1.1.3.1.7 |
| cooOtsOchControllerFrequency This object represents the frequency on
optical Ots-Och channel interfaces (unit 100 MHz). | column | 100 MHz Unsigned32 | .1.3.6.1.4.1.9.9.834.1.1.3.1.8 |
| cooOtsOchControllerChannelNumber This object represents the channel number on
optical OTS-OCH interfaces. | column | Unsigned32 | .1.3.6.1.4.1.9.9.834.1.1.3.1.9 |