cooOtsControllerLaserStatus
CISCO-OPTICAL-OTS-MIB ·
.1.3.6.1.4.1.9.9.834.1.1.2.1.2
Object
column
CiscoOpticalOtsLaserStatus
This object represents the current operational state of the laser.
Context
- MIB
- CISCO-OPTICAL-OTS-MIB
- OID
.1.3.6.1.4.1.9.9.834.1.1.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cooOtsControllerEntry
- Table
- cooOtsControllerTable
- Siblings
- 25
Syntax
CiscoOpticalOtsLaserStatus
- Source
- CiscoOpticalOtsLaserStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | unknown |
2 | on |
3 | off |
4 | apr |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cooOtsControllerPortType This object represents the port type of the optical OTS interface. | column | CiscoOpticalOtsPortType | .1.3.6.1.4.1.9.9.834.1.1.2.1.1 |
| cooOtsControllerTXVoaAttenuation This object represents the transmit VOA attenuation value
in 1/100 dBm on optical OTS interfaces. | column | 1/100 dB CiscoOpticalOtsVoaAttenInDb | .1.3.6.1.4.1.9.9.834.1.1.2.1.10 |
| cooOtsControllerRXLowThreshold This object is used to configure the receive low threshold in
1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.11 |
| cooOtsControllerTXLowThreshold This object is used to configure the transmit low threshold in
1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.12 |
| cooOtsControllerAmpliChannelPwr This object is used to configure the amplifier channel power in
1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.13 |
| cooOtsControllerChannelPwrMaxDelta This object is used to configure the maximum delta on channel
power in 1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.14 |
| cooOtsControllerAmpliControlMode This object is used to configure the amplifier control mode. | column | CiscoOpticalOtsAmpliControlMode | .1.3.6.1.4.1.9.9.834.1.1.2.1.15 |
| cooOtsControllerAmpliGainRange This object is used to configure the amplifier gain range. | column | CiscoOpticalOtsAmpliGainRange | .1.3.6.1.4.1.9.9.834.1.1.2.1.16 |
| cooOtsControllerAmpliSafetyCtrlMode This object is used to configure the safety control mode. | column | CiscoOpticalOtsAmpliSafetyCtrlMode | .1.3.6.1.4.1.9.9.834.1.1.2.1.17 |
| cooOtsControllerOsri This object is used to configure the OSRI. | column | CiscoOpticalOtsOsri | .1.3.6.1.4.1.9.9.834.1.1.2.1.18 |
| cooOtsControllerProtectionPortRole This object represents the port role on
optical channel interfaces. | column | CiscoOpticalOtsProtectionPortRole | .1.3.6.1.4.1.9.9.834.1.1.2.1.19 |
| cooOtsControllerState This object represents the controller status of
optical OTS interfaces. | column | CiscoOpticalOtsState | .1.3.6.1.4.1.9.9.834.1.1.2.1.20 |
| cooOtsControllerTranspAdminState This object represents the transport administration status on
optical OTS interfaces. | column | CiscoOpticalOtsTranspAdminState | .1.3.6.1.4.1.9.9.834.1.1.2.1.21 |
| cooOtsControllerAlarmState This object indicates the current alarms status of the Optics
layer.
Alarms description :
noDefect : No alarms
highRXPwr : Input optical power reading ov… | column | Bits | .1.3.6.1.4.1.9.9.834.1.1.2.1.22 |
| cooOtsControllerRXSpanLoss This object is used to represents the sapn loss power in 1/100
dBm on optical OTS interfaces | column | 1/100 dBm Integer32 | .1.3.6.1.4.1.9.9.834.1.1.2.1.23 |
| cooOtsControllerTXSpanLoss This object is used to represents the sapn loss power in 1/100
dBm on optical OTS interfaces | column | 1/100 dBm Integer32 | .1.3.6.1.4.1.9.9.834.1.1.2.1.24 |
| cooOtsControllerRXEnabled This object represents the RX direction status of optical OTS
interfaces. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.834.1.1.2.1.25 |
| cooOtsControllerTXEnabled This object represents the TX direction status of optical OTS
interfaces. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.834.1.1.2.1.26 |
| cooOtsControllerRXPower This object represents the receive power in
1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.3 |
| cooOtsControllerTXPower This object represents the transmit power in
1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.4 |
| cooOtsControllerAmpliGain This object represents the amplifier gain value in
1/100 dB on optical OTS interfaces. | column | 1/100 dB CiscoOpticalOtsGainInDb | .1.3.6.1.4.1.9.9.834.1.1.2.1.5 |
| cooOtsControllerAmpliTilt This object represents the amplifier tilt value in
1/100 dB on optical OTS interfaces. | column | 1/100 dB CiscoOpticalOtsTiltInDb | .1.3.6.1.4.1.9.9.834.1.1.2.1.6 |
| cooOtsControllerTotalRXPower This object is used to represents the total receive power in
1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.7 |
| cooOtsControllerTotalTXPower This object is used to represents the total transmit power
in 1/100 dBm on optical OTS interfaces. | column | 1/100 dBm CISCO-OPTICAL-MIBCoiOpticalPower | .1.3.6.1.4.1.9.9.834.1.1.2.1.8 |
| cooOtsControllerRXVoaAttenuation This object represents the receive VOA attenuation value
in 1/100 dBm on optical OTS interfaces. | column | 1/100 dB CiscoOpticalOtsVoaAttenInDb | .1.3.6.1.4.1.9.9.834.1.1.2.1.9 |