cnsT4ClkSrcNetsyncIndex
CISCO-NETSYNC-MIB ·
.1.3.6.1.4.1.9.9.761.1.1.5.1.1
Object
column
Unsigned32
An index that uniquely represents an entry in this table. This index is assigned arbitrarily by the clock selection process and may not be persistent across reboots.
Context
- MIB
- CISCO-NETSYNC-MIB
- OID
.1.3.6.1.4.1.9.9.761.1.1.5.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- cnsT4ClockSourceEntry
- Table
- cnsT4ClockSourceTable
- Siblings
- 18
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnsT4ClkSrcQualityLevelRx This object indicates the last clock quality
level received on the T4 input clock
source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.10 |
| cnsT4ClkSrcQualityLevel This object indicates the current clock quality
level of the T4 input clock source. This is the
effective quality which is derived from three values:
1) most recen… | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.11 |
| cnsT4ClkSrcHoldoffTime This object indicates the hold-off time value of
a T4 input clock source.
The hold-off time prevents short activation of signal failure
is passed to the selection p… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.761.1.1.5.1.12 |
| cnsT4ClkSrcWtrTime This object indicates the wait-to-restore time value
of a T4 input clock source.
The wait-to-restore time ensures that a previous failed
synchronization source is o… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.761.1.1.5.1.13 |
| cnsT4ClkSrcLockout This object indicates whether or not the lockout
command has been applied on a T4 clock source.
The 'true' value means the clock source is not
considered by the sel… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.14 |
| cnsT4ClkSrcSignalFailure This object indicates whether or not a
signal failure event is currently being
reported on the T4 input clock source. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.15 |
| cnsT4ClkSrcAlarm This object indicates whether or not an
alarm event is currently being reported
on the T4 input clock source. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.16 |
| cnsT4ClkSrcAlarmInfo This object indicates the alarm reasons of
a T4 input clock source if an alarm event
is being reported on the clock source. | column | CiscoNetsyncAlarmInfo | .1.3.6.1.4.1.9.9.761.1.1.5.1.17 |
| cnsT4ClkSrcFSW This object indicates the forced switching flag.
Forced switching, as described in G.781, is used to
override the currently selected synchronization source.
The 'tr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.18 |
| cnsT4ClkSrcMSW This object indicates the manual switching flag.
The 'true' value indicates the currently selected
T4 clock source is a result of the manual switching.
The switch a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.19 |
| cnsT4ClkSrcName This object indicates the name of a input
clock source configured for the T4 clock
selection. | column | OctetString | .1.3.6.1.4.1.9.9.761.1.1.5.1.2 |
| cnsT4ClkSrcIntfType This object indicates the type of an input
clock source configured for the T4 clock
selection. | column | CiscoNetsyncIfType | .1.3.6.1.4.1.9.9.761.1.1.5.1.3 |
| cnsT4ClkSrcPriority This object indicates the priority of an input
clock source configured for the T4 clock
selection.
A smaller value represents a higher priority. | column | Unsigned32 | .1.3.6.1.4.1.9.9.761.1.1.5.1.4 |
| cnsT4ClkSrcESMCCap This object indicates the ESMC capability
of an input clock source configured for the
T4 clock selection. This is applicable
only to Synchronous Ethernet input clock source
ident… | column | CiscoNetsyncESMCCap | .1.3.6.1.4.1.9.9.761.1.1.5.1.5 |
| cnsT4ClkSrcSSMCap This object indicates the SSM capability
of an input clock source configured for the
T4 clock selection. This is applicable only to any
synchronous interface clock source except S… | column | CiscoNetsyncSSMCap | .1.3.6.1.4.1.9.9.761.1.1.5.1.6 |
| cnsT4ClkSrcQualityLevelTxCfg This object indicates the configured transmit
clock quality level of a T4 input clock source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.7 |
| cnsT4ClkSrcQualityLevelRxCfg This object indicates the configured receive
clock quality level of a T4 input clock source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.8 |
| cnsT4ClkSrcQualityLevelTx This object indicates the most recent clock
quality level transmitted on the T4 input
clock source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.9 |