cnsT4ClkSrcName
CISCO-NETSYNC-MIB ·
.1.3.6.1.4.1.9.9.761.1.1.5.1.2
Object
column
OctetString
This object indicates the name of a input clock source configured for the T4 clock selection.
Context
- MIB
- CISCO-NETSYNC-MIB
- OID
.1.3.6.1.4.1.9.9.761.1.1.5.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cnsT4ClockSourceEntry
- Table
- cnsT4ClockSourceTable
- Siblings
- 18
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnsT4ClkSrcNetsyncIndex An index that uniquely represents an entry in
this table. This index is assigned arbitrarily by the
clock selection process and may not be persistent
across reboots. | column | Unsigned32 | .1.3.6.1.4.1.9.9.761.1.1.5.1.1 |
| cnsT4ClkSrcQualityLevelRx This object indicates the last clock quality
level received on the T4 input clock
source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.10 |
| cnsT4ClkSrcQualityLevel This object indicates the current clock quality
level of the T4 input clock source. This is the
effective quality which is derived from three values:
1) most recen… | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.11 |
| cnsT4ClkSrcHoldoffTime This object indicates the hold-off time value of
a T4 input clock source.
The hold-off time prevents short activation of signal failure
is passed to the selection p… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.761.1.1.5.1.12 |
| cnsT4ClkSrcWtrTime This object indicates the wait-to-restore time value
of a T4 input clock source.
The wait-to-restore time ensures that a previous failed
synchronization source is o… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.761.1.1.5.1.13 |
| cnsT4ClkSrcLockout This object indicates whether or not the lockout
command has been applied on a T4 clock source.
The 'true' value means the clock source is not
considered by the sel… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.14 |
| cnsT4ClkSrcSignalFailure This object indicates whether or not a
signal failure event is currently being
reported on the T4 input clock source. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.15 |
| cnsT4ClkSrcAlarm This object indicates whether or not an
alarm event is currently being reported
on the T4 input clock source. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.16 |
| cnsT4ClkSrcAlarmInfo This object indicates the alarm reasons of
a T4 input clock source if an alarm event
is being reported on the clock source. | column | CiscoNetsyncAlarmInfo | .1.3.6.1.4.1.9.9.761.1.1.5.1.17 |
| cnsT4ClkSrcFSW This object indicates the forced switching flag.
Forced switching, as described in G.781, is used to
override the currently selected synchronization source.
The 'tr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.18 |
| cnsT4ClkSrcMSW This object indicates the manual switching flag.
The 'true' value indicates the currently selected
T4 clock source is a result of the manual switching.
The switch a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.761.1.1.5.1.19 |
| cnsT4ClkSrcIntfType This object indicates the type of an input
clock source configured for the T4 clock
selection. | column | CiscoNetsyncIfType | .1.3.6.1.4.1.9.9.761.1.1.5.1.3 |
| cnsT4ClkSrcPriority This object indicates the priority of an input
clock source configured for the T4 clock
selection.
A smaller value represents a higher priority. | column | Unsigned32 | .1.3.6.1.4.1.9.9.761.1.1.5.1.4 |
| cnsT4ClkSrcESMCCap This object indicates the ESMC capability
of an input clock source configured for the
T4 clock selection. This is applicable
only to Synchronous Ethernet input clock source
ident… | column | CiscoNetsyncESMCCap | .1.3.6.1.4.1.9.9.761.1.1.5.1.5 |
| cnsT4ClkSrcSSMCap This object indicates the SSM capability
of an input clock source configured for the
T4 clock selection. This is applicable only to any
synchronous interface clock source except S… | column | CiscoNetsyncSSMCap | .1.3.6.1.4.1.9.9.761.1.1.5.1.6 |
| cnsT4ClkSrcQualityLevelTxCfg This object indicates the configured transmit
clock quality level of a T4 input clock source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.7 |
| cnsT4ClkSrcQualityLevelRxCfg This object indicates the configured receive
clock quality level of a T4 input clock source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.8 |
| cnsT4ClkSrcQualityLevelTx This object indicates the most recent clock
quality level transmitted on the T4 input
clock source. | column | CiscoNetsyncQualityLevel | .1.3.6.1.4.1.9.9.761.1.1.5.1.9 |