cmimModuleIndex

CISCO-MGX8800-IF-MAPPING-MIB · .1.3.6.1.4.1.351.150.7.1.1.1.1.1
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
An index value that uniquely identifies the location 
of the module or a physical line.
It has the information on slot number, back card
and physical line number. Following is the mapping 
used for this object.
              
Mapping used when cmimIfType is physicalLine(1), atm(3),
adjCardApsLine(6), imaGrpAtmPhy(9) and mfrBundle(21)
              
 Bits 0-7   : Ignored
 Bits 8-15  : Back Card Number (0 - Ignored, 1-Top Back card
                                2 - Bottom Back card)
 Bits 16-23 : Logical slot number
 Bits 24-31 : Shelf number
              (1 - Currently, only value 1 is supported)
              
 Mapping used when cmimIfType is set to ds1Inds3(5),
 sonetVT(8), sonetPath(12), ds3SonetPath(13), 
 atmSonetPath(14), atmDs3SonetPath(15), ds1VTPath(18),
 ds1Ds3SonetPath(19) and lapd(24)
              
 Bits 0-7   : DS3/E3/Sonet/Sdh physical line number
 Bits 8-15  : Back Card Number (0 - Ignored, 1-Top Back card
                                2 - Bottom Back card.
 Bits 16-23 : Logical slot number
 Bits 24-31 : Shelf number 
              (1 - Currently, only value 1 is supported)
              
 Mapping used when cmimIfType is set to propAtm(7),
 frameRelayPort(16), ces(17), atmVciEndPt(20), ppplink(22)
 and pppMpbundle(23).
              
 Bits 0-7   : 0  Ignored
 Bits 8-15  : 0  Ignored
 Bits 16-23 : Logical slot number
 Bits 24-31 : Shelf number (1 - only value 1 is supported)
              
 Mapping used when cmimIfType is set to srmBertLine(10) or
 srmBertPort(11) 
              
 Bits 0-7   : 0  Ignored
 Bits 8-15  : Logical slot number of NBSM
 Bits 16-23 : Logical slot number of SRM
 Bits 24-31 : Shelf number (1 - only value 1 is supported)

Context

MIB
CISCO-MGX8800-IF-MAPPING-MIB
OID
.1.3.6.1.4.1.351.150.7.1.1.1.1.1
Type
column
Access
noaccess
Status
current
Parent
cmimPhysToIfEntry
Table
cmimPhysToIfTable
Siblings
3

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmimIfNumber
An index value uniquely identifies the interface number (physical, logical) of the module. The value specified depends on the value specified in cmimIfType. …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.351.150.7.1.1.1.1.2
cmimIfType
The type of interface specified by cmimIfNumber.
columnCmimIfType.1.3.6.1.4.1.351.150.7.1.1.1.1.3
cmimIfIndex
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to the INDEXes specified in the table. Note that the values retu…
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.351.150.7.1.1.1.1.4