cmimIfNumber

CISCO-MGX8800-IF-MAPPING-MIB · .1.3.6.1.4.1.351.150.7.1.1.1.1.2
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
An index value uniquely identifies the interface
number (physical, logical) of the module. The 
value specified depends on the value specified in 
cmimIfType.
                   
cmimIfType	            cmimIfNumber
----------              ------------
              
physicalLine(1)         physical line number
atm(3)	                 physical line number for atm phy 
                        number
ds1Inds3(5)             DS1/E1 line number in a DS3/E3
adjCardApsLine(6)       adjacent card APS line number
propAtm(7)              set to 1, this is the only value
                        supported at this time
sonetVT(8)              DSxN tributary in a sonet/sdh line
imaGrpAtmPhy(9)         atm ima group for atm phy number
srmBertLine(10)         physical line number of NBSM
srmBertPort(11)         logical port number of NBSM.
sonetPath(12)           STS-1/AU-3 Path Number
atmSonetPath(14)        STS-1/AU-3 Path Number   
ds3SonetPath(13)        Bits 0..15 : STS-1/AU-3 Path Number
                        Bits 16..31: 1 for STS-1/AU-3 
                        or DS3 Number within AU-4 
atmDs3SonetPath(15)     Bits 0..15 : STS-1/AU-3 Path Number
                        Bits 16..31: 1 for STS-1/AU-3 
                        or DS3 Number within AU-4
frameRelayPort(16)      logical port number for frame 
                        interface
ces(17)                 logical port number of circuit
                        emulation service interface
ds1InVT(18)             Bits 0..7 :  VT Number
                        Bits 8..15:  VT group number
                        Bits 16..31: STS-1/AU-3 Path Number
ds1Ds3SonetPath(19)     Bits 0..7 :  ds1 Number
                        Bits 8..15:  ds3 Number
                        Bits 16..31: STS Path Number
atmVciEndPt(20)         Bits 0..15 : VCI 
                        Bits 16..27: VPI 
                        Bits 28..31: Port(ATM)
mfrBundle(21)           Multilink Frame Relay bundle number
ppplink(22)             ppp index of the ppp interface
pppMpbundle(23)         mpbundle index of the mpbundle 
                        interface 
lapd(24)                Bits 0..7  : ds0 number
                        Bits 8..15 : VT number or ds1 number
                        Bits 16..23: VT group (DS3 ignore it) 
                        Bits 24..31: STS or DS3 path

Context

MIB
CISCO-MGX8800-IF-MAPPING-MIB
OID
.1.3.6.1.4.1.351.150.7.1.1.1.1.2
Type
column
Access
noaccess
Status
current
Parent
cmimPhysToIfEntry
Table
cmimPhysToIfTable
Siblings
3

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmimModuleIndex
An index value that uniquely identifies the location of the module or a physical line. It has the information on slot number, back card and physical line number. Following is the…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.351.150.7.1.1.1.1.1
cmimIfType
The type of interface specified by cmimIfNumber.
columnCmimIfType.1.3.6.1.4.1.351.150.7.1.1.1.1.3
cmimIfIndex
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to the INDEXes specified in the table. Note that the values retu…
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.351.150.7.1.1.1.1.4