pxmExtClk2SrcImpedance
CISCO-MGX82XX-PXM-CLOCK-MIB ·
.1.3.6.1.4.1.351.110.3.16.15
Object
scalar
CmpClockImpedance
This object provides the impedance on external clock input on port 2 of PXMUI-S3 back card.
Context
- MIB
- CISCO-MGX82XX-PXM-CLOCK-MIB
- OID
.1.3.6.1.4.1.351.110.3.16.15- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- pxmClockConfig
- Siblings
- 15
Syntax
CmpClockImpedance
- Source
- CmpClockImpedance
- Base type
Enumeration
Values & Constraints
Type Values
1 | ohms75 |
2 | ohms100 |
3 | ohms120 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pxmPrimaryMuxClockSource This object identifies the source of the
Primary Mux Clock for PXM card. | scalar | CmpClockSourceType | .1.3.6.1.4.1.351.110.3.16.1 |
| pxmExtClkSrcImpedance Impedance on external clock input for PXM card. | scalar | CmpClockImpedance | .1.3.6.1.4.1.351.110.3.16.10 |
| pxmExtClkConnectorType This object describes the type of connector available
for connecting the external clock source to the PXM. | scalar | CmpClockConnectorType | .1.3.6.1.4.1.351.110.3.16.11 |
| pxmClkStratumLevel This object describes the lowest stratum level
provided by the interface the external clock source to
the PXM back card. | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.16.12 |
| pxmClkErrReason This object gives more information about clock
status.
The possible values are :
goodClk(1) : Clock is good
unkownReason(2) : reason not known
noClkSigna… | scalar | Enumeration | .1.3.6.1.4.1.351.110.3.16.13 |
| pxmExtClock2Present This object indicates the status of external T1/E1
Clock on port 2 of PXMUI-S3 back card. | scalar | CmpClockExistence | .1.3.6.1.4.1.351.110.3.16.14 |
| pxmExtClk2ConnectorType This object describes the type of connector
available for connecting the external clock source
to the port 2 of PXM-UI-S3 back card of PXM. | scalar | CmpClockConnectorType | .1.3.6.1.4.1.351.110.3.16.16 |
| pxmPrimaryInbandClockSourceLineNumber This object indicates the inband line number.
This is applicable when pxmPrimaryMuxClockSource is
pxmInbandClock1(1) or pxmServiceModuleClock2 (5). | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.16.2 |
| pxmPrimarySMClockSourceSlotNumber This object indicates the service module slot number.
This is applicable when pxmPrimaryMuxClockSource is
pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6). | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.16.3 |
| pxmSecondaryMuxClockSource This object identifies the source of the
Secondary Mux Clock for PXM card. | scalar | CmpClockSourceType | .1.3.6.1.4.1.351.110.3.16.4 |
| pxmSecondaryInbandClockSourceLineNumber This object indicates the inband line number.
This is applicable when pxmSecondaryMuxClockSource is
pxmInbandClock1(1) or pxmServiceModuleClock2 (5). | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.16.5 |
| pxmSecondarySMClockSourceSlotNumber This object indicates the service module slot number.
This is applicable when pxmSecondaryMuxClockSource is
pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6). | scalar | Integer32 | .1.3.6.1.4.1.351.110.3.16.6 |
| pxmCurrentClock This object represents the clock source currently
selected for PXM card.
primary(1): The primary clock source is described by
pxmPrimaryMuxClockSource
seco… | scalar | CmpCurrentClock | .1.3.6.1.4.1.351.110.3.16.7 |
| pxmPreviousClock This object represents the clock source previously
selected for PXM card. | scalar | CmpCurrentClock | .1.3.6.1.4.1.351.110.3.16.8 |
| pxmExtClockPresent Status of External T1/E1 Clock on PXM card. | scalar | CmpClockExistence | .1.3.6.1.4.1.351.110.3.16.9 |