cLWSecDot11EssPsk
CISCO-LWAPP-WLAN-SECURITY-MIB ·
.1.3.6.1.4.1.9.9.521.1.1.1.1.8
Object
column
r/w
OctetString
This object specifies the authentication pre-shared
key in the hex format that is applicable only when
the 'psk' bit is specified in the
cLWSecDot11EssCckmKeyMgmtMode object.
The length of the key that can be specified for
the cLWSecDot11EssPsk object depends on the
value of the cLWSecDot11EssPskFmt object as
follows.
'ascii' 8-63 octets
'hex' 32 octets.
Context
- MIB
- CISCO-LWAPP-WLAN-SECURITY-MIB
- OID
.1.3.6.1.4.1.9.9.521.1.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cLWSecDot11EssCckmEntry
- Table
- cLWSecDot11EssCckmTable
- Siblings
- 28
Syntax
OctetString
Values & Constraints
Object Constraints
range: 8-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLWSecDot11EssCckmWpaSupport This object specifies to enable or disable layer-2
security using WPA1 or WPA2. When this
object is set to 'true' layer-2 security is enabled.
When this object is set to 'fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.1 |
| cLWSecDot11EssFtEnable deprecated This object specifies whether fast transition is enabled
for particular WLAN.
A value of 'true' means that fast transition is enabled and
A value of 'false' means that fast transi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.10 |
| cLWSecDot11EssFtReassocTime This object specifies the fast transition
re-association time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.521.1.1.1.1.11 |
| cLWSecDot11EssFtOverDs This object specifies whether fast transition over
distributed system is enabled.
A 'true' value means that fast transition over the
distributed system is enabled.
A 'false' val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.12 |
| cLWSecDot11Ess11wPfm This object specifies the 802.11w PFM status for a
particular WLAN. | column | Enumeration | .1.3.6.1.4.1.9.9.521.1.1.1.1.13 |
| cLWSecDot11EssRetryTime This object specifies the 802.11w Security Association(SA)
query retry timeout. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.521.1.1.1.1.14 |
| cLWSecDot11EssComebackTime This object specifies the 802.11w association comeback time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.521.1.1.1.1.15 |
| cLWSecDot11EssFtMode This object indicates the 11r status for a wlan
cLWSecDot11EssFtMode is set to a value of
'adaptive'. | column | Enumeration | .1.3.6.1.4.1.9.9.521.1.1.1.1.16 |
| cLWSecDot11EssWpa3Security This object specifies whether
wpa3 security is enabled or not.
A value of 'true' indicates that WPA3 security
is enabled on the controller.
A value of 'false' indicates tha… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.17 |
| cLWSecDot11EssMPskEnable This object specifies whether
Multi-PSK security feature is enabled or not.
True: indicates Multi-PSK security feature
is enabled.
False: indicates Multi-PSK security featu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.18 |
| cLWSecDot11EssSaeAntiClogThreshold This object specifies the threshold for number of
SAE open sessions beyond which Anti Clogging shall
be enforced for future associations. | column | Unsigned32 | .1.3.6.1.4.1.9.9.521.1.1.1.1.19 |
| cLWSecDot11EssCckmWpa1Security This object specifies whether cckmwpa1 security
is enabled or not.
A value of 'true' indicates that WPA1 security
is enabled on the controller.
A value of 'false' indic… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.2 |
| cLWSecDot11EssSaeRetransTimeout This object specifies the SAE Retransmission
Timeout value. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.521.1.1.1.1.20 |
| cLWSecDot11EssSaeMaxRetry This object specifies the SAE maximum number of
retry count | column | Integer32 | .1.3.6.1.4.1.9.9.521.1.1.1.1.21 |
| cLWSecDot11OsenEnable This object specifies whether Hotspot 2.0
OSEN security feature is enabled or not.
True: indicates OSEN security feature
is enabled.
False: indicates OSEN security feature i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.22 |
| cLWSecDot11TMWlanId This object shall be used to configure OWE
Transition mode support on the corresponding
WLANs. Range: 0-4096. It enables OWE Transition
mode on the corresponding WLANs. If it is 0… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.521.1.1.1.1.23 |
| cLWSecDot11EssWpa3EncType This object specifies the type of WPA3 encryption
configured on this WLAN.
The value populated by this object is applicable
only when cLWSecDot11EssWpa3Security populates
a value … | column | Bits | .1.3.6.1.4.1.9.9.521.1.1.1.1.24 |
| cLWSecDot11EssPskType This object indicates the type of storage used
to store PSK.
clear: indicate PSK is stored as clear text'.
aes : indicate the PSK is stored encrypted using AES. | column | Enumeration | .1.3.6.1.4.1.9.9.521.1.1.1.1.25 |
| cLWSecDot11EssEasyPskEnable This object specifies whether Easy PSK security feature is
enabled or not.
True: indicates Easy PSK security feature is enabled.
False: indicates Easy PSK security feature is disa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.26 |
| cLWSecDot11EssSaePweMode This object specifies SAE Password Element Mode
0: Hunting And Pecking Only, disables Hash To Element
1: Hash To Element Only, disables Hunting and Pecking
2: Both Hash to element… | column | Enumeration | .1.3.6.1.4.1.9.9.521.1.1.1.1.27 |
| cLWSecDot11TransitionDisable This object specifies whether Transition Disable feature is
enabled or not.
True: indicates Transition Disable feature is enabled.
False: indicates Transition Disable feature is d… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.28 |
| cLWSecDot11BeaconProtectionEnable This object specifies whether Beacon Protection feature is
enabled or not.
True: indicates Beacon Protection feature is enabled.
False: indicates Beacon Protection feature is disa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.29 |
| cLWSecDot11EssCckmWpa1EncType This object specifies the type of WPA1 encryption
configured on this WLAN.
The value populated by this object is applicable
only when cLWSecDot11EssCckmWpa1Security populates
a va… | column | CISCO-LWAPP-TC-MIBCLSecEncryptType | .1.3.6.1.4.1.9.9.521.1.1.1.1.3 |
| cLWSecDot11EssCckmWpa2Security This object specifies whether
cckmwpa2 security is enabled or not.
A value of 'true' indicates that WPA2 security
is enabled on the controller.
A value of 'false' indicates… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.4 |
| cLWSecDot11EssCckmWpa2EncType This object specifies the type of WPA2 encryption
configured on this WLAN.
The value populated by this object is applicable
only when cLWSecDot11EssCckmWpa2Security populates
a va… | column | CISCO-LWAPP-TC-MIBCLSecEncryptType | .1.3.6.1.4.1.9.9.521.1.1.1.1.5 |
| cLWSecDot11EssCckmKeyMgmtMode This object specifies the type of authentication
key management that is applicable only when
cLWSecDot11EssCckmWpaSupport is set to a value of
'true'.
The following… | column | Bits | .1.3.6.1.4.1.9.9.521.1.1.1.1.6 |
| cLWSecDot11EssPskFmt This object specifies the type of the
authentication preshared key configured through
the object cLWSecDot11EssCckmPsk. Note
that the key configuration is applicable only
when ps… | column | CISCO-LWAPP-TC-MIBCLSecKeyFormat | .1.3.6.1.4.1.9.9.521.1.1.1.1.7 |
| cLWSecDot11EssCckmGtkRandomize This object represents the Group Temporal Key(GTK)
used for multicast and broadcast packet encryption
in wpa1 and wpa2 clients.
This object indicates the Group Tem… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.521.1.1.1.1.9 |