clWapiUnicastRekeyMethod

CISCO-LWAPP-WAPI-MIB · .1.3.6.1.4.1.9.9.9997.2.15
MIB view Table view

Object

scalar r/w Enumeration 
This object selects a mechanism for rekeying the WAPI USK.
The default is time-based, once per day. Rekeying the USK
is only applicable to an entry acting in the AE role.
Method 1 (disabled) will temporarily stop the unicast rekeying

Context

MIB
CISCO-LWAPP-WAPI-MIB
OID
.1.3.6.1.4.1.9.9.9997.2.15
Type
scalar
Access
readwrite
Status
current
Parent
ciscoLwappWapiConfig
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disabled
2timeBased
3messageBased
4timeMessageBased

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
clWapiASIpAddress
This object represents the IP address of the WAPI authentication server.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.9.9.9997.2.1
clWapiConfigUnicastUpdateCount
This object represents the number of times message 1 and message 3 in the WAPI unicast key announcement handshake will be retried per USK handshake attempt.
scalarUnsigned32.1.3.6.1.4.1.9.9.9997.2.10
cLWCSWapiConfigureVersion
This object represents the WAPI configuration version
scalarInteger32.1.3.6.1.4.1.9.9.9997.2.11
clWapiConfigControlledPortControl
This object indicates the value of the Controlled port. If the value is 0 which means automatic, the current behaviour. The state of the controlled port shall be based on the res…
scalarEnumeration.1.3.6.1.4.1.9.9.9997.2.12
clWapiUserInvalidCertificationInbreakNetwork
This object represents the WAPI user with invalid certification.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.9.9.9997.2.13
cLApWAPISecurityLowAttack
This object represents the WAPI security low attack notification information.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.9.9.9997.2.14
clWapiUnicastRekeyTime
This object represents the time in seconds after which the WAPI USK will be refreshed. The timer will start the moment the USK was set using the MLME-SETWPIKEYS request primitive.
scalarseconds Unsigned32.1.3.6.1.4.1.9.9.9997.2.16
clWapiUnicastRekeyMessage
This object represents the message count in thousands after which the WAPI USK will be refreshed. The message counter will start the moment the USK was set using the MLME-SETWPIKE…
scalar1000 messages Unsigned32.1.3.6.1.4.1.9.9.9997.2.17
clWapiConfigSATimeout
This object represents the maximum time a security association shall take to set up.
scalarseconds Unsigned32.1.3.6.1.4.1.9.9.9997.2.18
cLApWAPIReplayAttack
This object represents the WAPI replay attack notification information.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.9.9.9997.2.19
clWapiASPortNumber
This object represents the UDP port number for WAPI authentication server.
scalarInteger32.1.3.6.1.4.1.9.9.9997.2.2
cLApWAPITamperAttack
This object represents the WAPI tamper attack notification information.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.9.9.9997.2.20
clWapiAddressRedirectAttack
This object represents the WAPI redirect attack notification information.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.9.9.9997.2.21
clWapiASRequestTimeout
This object represents timeout value for the packets sent to Auth Server.
scalarInteger32.1.3.6.1.4.1.9.9.9997.2.3
clWapiMulticastRekeyMethod
This object selects a mechanism for rekeying the WAPI MSK. The default is time-based, once per day. Rekeying the MSK is only applicable to an entry acting in the AE role.
scalarEnumeration.1.3.6.1.4.1.9.9.9997.2.4
clWapiMulticastRekeyTime
This object represents the time in seconds after which the WAPI MSK will be refreshed. The timer will start the moment the MSK was set using the MLME-SETWPIKEYS request primitive.
scalarseconds Unsigned32.1.3.6.1.4.1.9.9.9997.2.5
clWapiMulticastRekeyMessages
This object represents the message count in thousands after which the WAPI MSK will be refreshed. The message counter will start the moment the MSK was set using the MLME-SETWPIKE…
scalarUnsigned32.1.3.6.1.4.1.9.9.9997.2.6
clWapiMulticastRekeyStrict
This object signals that the MSK shall be refreshed whenever a STA leaves the BSS that possesses the MSK.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.9997.2.7
clWapiConfigCertificateUpdateCount
This object represents the number of times messages in the WAPI hhandshake protocol will be retried per certificate handshake attempt.
scalarUnsigned32.1.3.6.1.4.1.9.9.9997.2.8
clWapiConfigMulticastUpdateCount
This object represents the number of times message 1 in the WAPI muticast key announcement handshake will be retried per MSK handshake attempt.
scalarUnsigned32.1.3.6.1.4.1.9.9.9997.2.9