clWapiASIpAddress
CISCO-LWAPP-WAPI-MIB ·
.1.3.6.1.4.1.9.9.9997.2.1
Object
This object represents the IP address of the WAPI authentication server.
Context
- MIB
- CISCO-LWAPP-WAPI-MIB
- OID
.1.3.6.1.4.1.9.9.9997.2.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ciscoLwappWapiConfig
- Siblings
- 20
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clWapiConfigUnicastUpdateCount This object represents the number of times message 1 and message 3 in the WAPI unicast key announcement handshake will be retried per USK handshake attempt. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.10 |
| cLWCSWapiConfigureVersion This object represents the WAPI configuration version | scalar | Integer32 | .1.3.6.1.4.1.9.9.9997.2.11 |
| clWapiConfigControlledPortControl This object indicates the value of the Controlled
port. If the value is 0 which means automatic, the
current behaviour. The state of the controlled port
shall be based on the res… | scalar | Enumeration | .1.3.6.1.4.1.9.9.9997.2.12 |
| clWapiUserInvalidCertificationInbreakNetwork This object represents the WAPI user with
invalid certification. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.9997.2.13 |
| cLApWAPISecurityLowAttack This object represents the WAPI security low attack notification
information. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.9997.2.14 |
| clWapiUnicastRekeyMethod This object selects a mechanism for rekeying the WAPI USK.
The default is time-based, once per day. Rekeying the USK
is only applicable to an entry acting in the AE role.
Method 1… | scalar | Enumeration | .1.3.6.1.4.1.9.9.9997.2.15 |
| clWapiUnicastRekeyTime This object represents the time in seconds after which the
WAPI USK will be refreshed. The timer will start the
moment the USK was set using the MLME-SETWPIKEYS
request primitive. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.16 |
| clWapiUnicastRekeyMessage This object represents the message count in thousands
after which the WAPI USK will be refreshed.
The message counter will start the moment the USK was set
using the MLME-SETWPIKE… | scalar | 1000 messages Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.17 |
| clWapiConfigSATimeout This object represents the maximum time a security association shall take to set up. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.18 |
| cLApWAPIReplayAttack This object represents the WAPI replay attack notification information. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.9997.2.19 |
| clWapiASPortNumber This object represents the UDP port number for WAPI authentication server. | scalar | Integer32 | .1.3.6.1.4.1.9.9.9997.2.2 |
| cLApWAPITamperAttack This object represents the WAPI tamper attack notification information. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.9997.2.20 |
| clWapiAddressRedirectAttack This object represents the WAPI redirect attack notification information. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.9997.2.21 |
| clWapiASRequestTimeout This object represents timeout value for the packets sent to Auth Server. | scalar | Integer32 | .1.3.6.1.4.1.9.9.9997.2.3 |
| clWapiMulticastRekeyMethod This object selects a mechanism for rekeying the WAPI MSK. The default is time-based, once per day. Rekeying the MSK is only applicable to an entry acting in the AE role. | scalar | Enumeration | .1.3.6.1.4.1.9.9.9997.2.4 |
| clWapiMulticastRekeyTime This object represents the time in seconds after which the WAPI MSK will be refreshed. The timer will start the moment the MSK was set using the MLME-SETWPIKEYS request primitive. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.5 |
| clWapiMulticastRekeyMessages This object represents the message count in thousands after which the WAPI MSK will be refreshed. The message counter will start the moment the MSK was set using the MLME-SETWPIKE… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.6 |
| clWapiMulticastRekeyStrict This object signals that the MSK shall be refreshed whenever a STA leaves the BSS that possesses the MSK. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.9997.2.7 |
| clWapiConfigCertificateUpdateCount This object represents the number of times messages in the WAPI hhandshake protocol will be retried per certificate handshake attempt. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.8 |
| clWapiConfigMulticastUpdateCount This object represents the number of times message 1 in the WAPI muticast key announcement handshake will be retried per MSK handshake attempt. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.9997.2.9 |