cLTsmDot11UplinkTable

CISCO-LWAPP-TSM-MIB · .1.3.6.1.4.1.9.9.525.1.2.2
MIB view Table view

Object

table 
This table represents the statistics received by the
controller from the associated APs, on the uplink 
traffic ( traffic from the 802.11 wireless client to 
the AP ) observed on the dot11 interfaces of the 
respective APs.
          
For example, suppose a client with address 
12:3f:73:99:de:5b connects to the 802.11 radio 
interface, 13:13:43:de:bb:ff of an AP at 18:30:00 hours.
          
Assuming that cLTsmDot11aConfig (or cLTsmDot11bConfig) 
is set to 'true' for the respective type of interface, 
every 90 seconds, AP sends the controller statistical
data for the client 12:3f:73:99:de:5b associated at the
interface 13:13:43:de:bb:ff.
          
So, after 3 minutes, i.e., 180 seconds, controller would 
have received statistics for the particular client and 
AP combination twice leading to two rows in this table
as follows.
          
1> Client: 12:3f:73:99:de:5b  
             Interface:13:13:43:de:bb:ff  Time: 18:33:00 
          
2> Client: 12:3f:73:99:de:5b  
             Interface:13:13:43:de:bb:ff  Time: 18:31:30 
          
Now assume that, at 18:33:00, the client moves and 
associates with another AP associated to the same
controller, at the AP's 802.11 interface 
14:14:43:de:dd:ee.
          
After 3 minutes, i.e., 180 seconds (say), controller 
would have again received statistics from the AP, for
the particular client and new AP combination twice
leading to two new rows in this table.
          
At this point, this table will have entries with 
following references :
          
1> Client: 12:3f:73:99:de:5b  
           Interface:14:14:43:de:dd:ee  Time: 18:36:00 
          
2> Client: 12:3f:73:99:de:5b  
           Interface:14:14:43:de:dd:ee  Time: 18:34:30
          
3> Client: 12:3f:73:99:de:5b  
           Interface:13:13:43:de:bb:ff  Time: 18:33:00 
          
4> Client: 12:3f:73:99:de:5b  
           Interface:13:13:43:de:bb:ff  Time: 18:31:30
          
The maximum number of entries in this table is
indicated by cLTsmDot11MaxTsmStatsEntries.  When
the specified limit of entries is reached the oldest
entries will be removed to make room for new entries.
However, the controller may remove the entries if it
encounters memory shortage.

Context

MIB
CISCO-LWAPP-TSM-MIB
OID
.1.3.6.1.4.1.9.9.525.1.2.2
Type
table
Status
current
Parent
ciscoLwappTsmDot11Stats
Siblings
3
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cLTsmDot11ClientTable
This table lists those clients for which TSM statistics are collected by the controller from the respective APs associated with the controller. A row is added to this t…
table-.1.3.6.1.4.1.9.9.525.1.2.1
cLTsmDot11DnlinkTable
This table represents the statistics received by the controller from the associated APs, on the downlink traffic ( traffic from the AP to the 802.11 wireless client ) observed on …
table-.1.3.6.1.4.1.9.9.525.1.2.3
cLTsmDot11CUTable
This table represents Channel Utilization statistics received by the Controller from associated APs observed on the dot11 radio interfaces of the respective APs. A row is added to…
table-.1.3.6.1.4.1.9.9.525.1.2.4
Child Objects
ObjectTypeSyntaxOID
cLTsmDot11UplinkEntry
Each entry represents a conceptual row in this table and corresponds to the uplink TSM statistics received from an AP, in a 90 second window (cLTsmDot11UplinkTimeStamp), for a mob…
row-.1.3.6.1.4.1.9.9.525.1.2.2.1