ciscoLwappDot11ClientCoverageHolePreAlarm
CISCO-LWAPP-RRM-MIB ·
.1.3.6.1.4.1.9.9.615.0.1
Object
notification
This notification is generated when the AP receives at least 'packet count' packets, represented by clrRrmParametersVoicePktCount for voice or clrRrmParametersDataPktCount for data, from a client in any given 5 second interval and 'packet percent' of the packets, represented by clrRrmParametersVoicePktCount for voice and clrRrmParametersDataPktCount for data, from the client are below the 'RSSI threshold' represented by clrRrmParametersVoiceRssiThreshold for voice and clrRrmParametersDataRssiThreshold for data.
Context
- MIB
- CISCO-LWAPP-RRM-MIB
- OID
.1.3.6.1.4.1.9.9.615.0.1- Type
- notification
- Status
- current
- Parent
- ciscoLwappRrmMIBNotifs
- Siblings
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoLwappRrmRfGroupLeaderChange This notification would be generated,
from the controller that is elected as the
new leader, when RF Grouping is done.
It has MAC address and details of the new Group Leader. | notification | - | .1.3.6.1.4.1.9.9.615.0.2 |
| ciscoLwappRrmRfGroupMemberAdded This notification is generated from the group leader
when a new member is added to the RF group.
This notification has MAC address and details of
new group member. | notification | - | .1.3.6.1.4.1.9.9.615.0.3 |
| ciscoLwappRrmRfGroupMemberRemoved The notification is generated from the group leader,
when a member is removed from the RF group.
This notification has MAC address and details of
removed group member. | notification | - | .1.3.6.1.4.1.9.9.615.0.4 |
| ciscoLwappDot11ClientCoverageHolePreAlarmRev The system generates this notification when the
RRM coverage hole detection algorithm detects areas of radio
coverage in a wireless LAN that are below the level needed for
robust … | notification | - | .1.3.6.1.4.1.9.9.615.0.5 |
| ciscoLwappRrmRfGroupLeaderChangeRev This notification would be generated,
from the controller that is elected as the
new leader, when RF Grouping is done.
It has MAC address and details of the new Group Leader. | notification | - | .1.3.6.1.4.1.9.9.615.0.6 |
| ciscoLwappRrmRfGroupMemberAddedRev This notification is generated from the group leader
when a new member is added to the RF group.
This notification has MAC address and details of
new group member. | notification | - | .1.3.6.1.4.1.9.9.615.0.7 |
| ciscoLwappRrmRfGroupMemberRemovedRev The notification is generated from the group leader,
when a member is removed from the RF group.
This notification has MAC address and details of
removed group member. | notification | - | .1.3.6.1.4.1.9.9.615.0.8 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress This object represents the MAC address of the
client for this entry and uniquely identifies
this entry. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.599.1.3.1.1.1 |
| CISCO-LWAPP-DOT11-CLIENT-MIBcldcApMacAddress This object represents the radio MAC address
of a LWAPP AP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.599.1.3.1.1.8 |
| CISCO-LWAPP-DOT11-CLIENT-MIBcldcIfType This object represents the wireless interface type. | column | CISCO-LWAPP-TC-MIBCLApIfType | .1.3.6.1.4.1.9.9.599.1.3.1.1.9 |
| CISCO-LWAPP-AP-MIBcLApName This object specifies the administrative name
assigned to the AP by the user. If an AP is not configured,
its factory default name will be ap:<last three byte
of MACAddress> eg.… | column | OctetString | .1.3.6.1.4.1.9.9.513.1.1.1.1.5 |
| clrRrmApTransmitPowerLevel This indicates represents the transmit power level for the AP. | scalar | Integer32 | .1.3.6.1.4.1.9.9.615.1.2.1 |
| clrRrmTimeStamp This object indicates the time when coverage
pre alarm was first reported to controller by an
access point. After receiving this alert,
controller will try to mitigate the covera… | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.615.1.2.2 |
| clrRrmClientType This object indicates the client type for which this
notification was sent.
data(1) - coverage hole has been detected for a data
client(client which is … | scalar | Enumeration | .1.3.6.1.4.1.9.9.615.1.2.3 |
| clrRrmRssiHistogramLength This object represents the number of values on the histogram.
At present it is 31 entries. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.615.1.2.4 |
| clrRrmRssiHistogramMaxIndex This object represents the maximum value on the histogram. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.615.1.2.5 |
| clrRrmRssiHistogramMinIndex This object represents the minimum value on the histogram. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.615.1.2.6 |
| clrRrmRssiHistogramValues This object returns a comma seperated string of histogram
values. The number of values sent out is represented by the
clrRrmRssiHistogramLength. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.615.1.2.7 |
| clrRrmNeighborApCount This object represents the number of 'clrRrmNeighborApMac,
clrRrmNeighborApRssi' appended to this notification.
This count is 5 and includes the AP itself. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.615.1.2.8 |
| clrRrmNeighborApMacAddress This object represents the neighbor MAC address for this
client. This is a comma seperated values for clrRrmNeighborApCount
values. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.615.1.2.9 |
| clrRrmNeighborApRssi This object represents the neighbor RSSI values for this
client. This is a comma seperated values for clrRrmNeighborApCount
values. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.615.1.2.10 |
| clrRrmNeighborApIfType This object represents the neighbor AP radio type for this
client. This is a comma seperated values for clrRrmNeighborApCount
values. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.615.1.2.11 |
| CISCO-LWAPP-WLAN-MIBcLWlanChdEnable | - | - | - |