cLRogueTransientInterval
CISCO-LWAPP-ROGUE-MIB ·
.1.3.6.1.4.1.9.9.610.1.1.1.4
Object
scalar
r/w
seconds Unsigned32
This object specifies the rogue transient
interval.
A value of '0' specifies that an AP sends
rogue detection details to the controller
as soon as it detects a rogue.
A non-zero value specifies that an AP sends
rogue detection details to the controller if
it hears the rogue more than once in the specified
interval.
Context
- MIB
- CISCO-LWAPP-ROGUE-MIB
- OID
.1.3.6.1.4.1.9.9.610.1.1.1.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- cLRoguePolicyConfig
- Siblings
- 9
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 120-1800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLRogueAdhocRogueReportEnable This object is used to turn on and off ad-hoc
rogue reporting.
A value of 'true' indicates that adhoc rogue
reporting is enabled.
A value of 'false' indicates that adhoc rogue
re… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.610.1.1.1.1 |
| cLRogueContainAutoRateEnable This object is used to turn on and off rogue
containment automatic rate selection.
A value of 'true' indicates that automatic
rate selection will be enabled.
A value of 'false' … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.610.1.1.1.10 |
| cLRogueReportInterval This object specifies the rogue report interval,
which is the interval that monitor mode APs send
rogue detection details to the controller. | scalar | seconds Unsigned32 | .1.3.6.1.4.1.9.9.610.1.1.1.2 |
| cLRogueMinimumRssi This object specifies the minimum value of RSSI
considered for detection of rogues. | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.610.1.1.1.3 |
| cLRogueClientNumThreshold This object specifies the number of clients the Rogue AP
can have. A value of zero indicates no limitation on
the number of clients the Rogue AP can have. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.610.1.1.1.5 |
| cLRogueDetectionSecurityLevel This object specifies the rogue detection security level.
When the object has value of 'low', 'high' or 'critical',
controller uses pre-defined rogue detection parameters for
th… | scalar | Enumeration | .1.3.6.1.4.1.9.9.610.1.1.1.6 |
| cLRogueValidateRogueClientsAgainstMse The object specifies whether the controller validates
'valid' clients which are associating with rogue AP,
against Mse. A value of 'enable' indicates that the
controller does va… | scalar | Enumeration | .1.3.6.1.4.1.9.9.610.1.1.1.7 |
| cLRogueValidateRogueApsAgainstAAA This flag should be turned on to allow the controller to
validate 'valid' Aps against radius server. | scalar | Enumeration | .1.3.6.1.4.1.9.9.610.1.1.1.8 |
| cLRogueApPollingInterval This object represents the polling interval of rogue Ap
in seconds. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.610.1.1.1.9 |