cLRldpAutoContainLevel
CISCO-LWAPP-ROGUE-MIB ·
.1.3.6.1.4.1.9.9.610.1.1.5.5
Object
scalar
r/w
Integer32
This object is used to specify the level of auto containment. The level actually denotes the number of APs that should be used by the controller for auto containment. A value of '0' means level of auto containment is selected automatically.
Context
- MIB
- CISCO-LWAPP-ROGUE-MIB
- OID
.1.3.6.1.4.1.9.9.610.1.1.5.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cLRldpAutoContainConfig
- Siblings
- 6
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLRldpAutoContainFeatureOnWiredNetwork This object represents the RLDP Auto contain feature status.
disable - automatic containment of rogues on wired network is disabled
enable - automatic containment of rogues on wi… | scalar | Enumeration | .1.3.6.1.4.1.9.9.610.1.1.5.1 |
| cLRldpAutoContainRoguesAdvertisingSsid This is the action with respect to auto containment feature,
that should be taken when switch detects rogues that are
advertising our SSID.
NOTE: Using this feature ma… | scalar | CLAutoContainActions | .1.3.6.1.4.1.9.9.610.1.1.5.2 |
| cLRldpAutoContainAdhocNetworks This is the action with respect to auto containment feature,
that should be taken when adhoc networks are
detected by the switch.
NOTE: Using this feature may have leg… | scalar | CLAutoContainActions | .1.3.6.1.4.1.9.9.610.1.1.5.3 |
| cLRldpAutoContainTrustedClientsOnRogueAps This is the action with respect to auto containment feature,
that should be taken when trusted clients that
are associated to rogue APs are detected by the switch.
NOT… | scalar | CLAutoContainActions | .1.3.6.1.4.1.9.9.610.1.1.5.4 |
| cLRldpAutoContainOnlyforMonitorModeAps This object is used to specify if auto containment should be
done only using monitor mode APs or not.
disable - auto containment will be done using all APs irrespective of the mo… | scalar | Enumeration | .1.3.6.1.4.1.9.9.610.1.1.5.6 |
| cLRldpAutoContainFlexStandaloneAp This object is used to specify if auto containment should be
done on FlexConnect standalone APs.
disable - auto containment will not be done on FlexConnect standalone APs
enable … | scalar | Enumeration | .1.3.6.1.4.1.9.9.610.1.1.5.7 |