cLQd11bMcastDirectEnable
CISCO-LWAPP-QOS-MIB ·
.1.3.6.1.4.1.9.9.524.1.2.13
Object
This object specifies the decision flag to allow multicast direct stream on radio. This overrides Resource Reservation Control status.
Context
- MIB
- CISCO-LWAPP-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.524.1.2.13- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cLQd11bCACConfig
- Siblings
- 21
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLQd11bVoiceAdmCtrlSupport This object is used to enable or disable admission
control for voice traffic flowing through the
802.11b/g interfaces in the controller.
When set to 'true', controller… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.2.1 |
| cLQd11bEdcaProfile This object represents the EDCA profile to be used
in EDCA Parameter set element. See glossary for EDCA.
wmmDefault - WMM default standard parameters.
svpVoice - S… | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.2.10 |
| cLQd11bMacOptimization This object represents MAC enhancements for voice,
resulting in improvement in number of voice calls
serviced per access point.
A value of 'true' enables MAC optimization.
A value… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.2.11 |
| cLQd11bMaxCallLimit deprecated This object represents the max number of CAC Voice Calls
allowed on dot11b radio band.
Value of zero denotes no limit.
This mib is deprecated since this configuration is
no longe… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.524.1.2.12 |
| cLQd11bBestEffortAdmission This object specifies whether to admit a media stream in best
effort queue. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.2.14 |
| cLQd11bRedirectBestEffort This object specifies whether a unicast or multicast only video
stream can be redirected to best effort. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.2.15 |
| cLQd11bRadioMaxStreams This object specifies the maximum number of allowed streams per
radio for a 802.11b band. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.524.1.2.16 |
| cLQd11bMaxVideoATPercent This object denotes the maximum allowed bandwidth for video
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.2.17 |
| cLQd11bMaxVoiceATPercent This object denotes the maximum allowed bandwidth for voice
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.2.18 |
| cLQd11bMaxMediaATPercent This object specifies the maximum allowed bandwidth for media
traffic. | scalar | Percent Integer32 | .1.3.6.1.4.1.9.9.524.1.2.19 |
| cLQd11bVoiceMaxAdmBandwidth This object denotes the maximum bandwidth that
can be allocated by controller for voice traffic
when admission control is enabled for 802.11b/g
interfaces in the controller.
… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.2.2 |
| cLQd11bMinPhyRate This object specifies the minimum physical rate
that should be enabled by a client to successfully join a media
stream. | scalar | CiscoLwappDot11bPhyRates | .1.3.6.1.4.1.9.9.524.1.2.20 |
| cLQd11bClientMaxStreams This object specifies the maximum number of allowed streams per
client for a 802.11b band. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.524.1.2.21 |
| cLQd11bSipCacSupportEnable This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11b radio band.
A value of 'false' disables SIP CAC on dot11b radio band | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.2.22 |
| cLQd11bVoiceMaxRoamBandwidth This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11bVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice traf… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.2.3 |
| cLQd11bVideoAdmCtrlSupport This object is used to enable or disable admission
control for video traffic flowing through the
802.11b/g interfaces in the controller.
When set to 'true', controller… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.2.4 |
| cLQd11bVideoMaxAdmBandwidth This object denotes the maximum bandwidth that
can be allocated by controller for video traffic when
admission control is enabled for 802.11b/g interfaces
in the controller. Whe… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.2.5 |
| cLQd11bVideoMaxRoamBandwidth This objects represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11bVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video tra… | scalar | Percent Unsigned32 | .1.3.6.1.4.1.9.9.524.1.2.6 |
| cLQd11bGprProbeInterval This object is used to set GPR probe interval
period to be used by all 802.11b/g interfaces in the
controller, when the radios are advertising any
WLAN with GPR support enabled.
… | scalar | TU Unsigned32 | .1.3.6.1.4.1.9.9.524.1.2.7 |
| cLQd11bVoiceCtrl When admission control is enabled these parameters
can be modified.
loadBased - controller will reserve and manage
max-bandwidth and roaming-bandwidth
… | scalar | Enumeration | .1.3.6.1.4.1.9.9.524.1.2.8 |
| cLQd11bExpeditedBw This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association res… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.524.1.2.9 |