ciscoLwappMfpProtectConfigMismatch
CISCO-LWAPP-MFP-MIB ·
.1.3.6.1.4.1.9.9.518.0.1
Object
notification
This notification is sent by the agent when the
controller detects that the AP couldn't apply the
protection configuration to the specific radio
interface for the specified WLAN. The controller
detects the mismatch by matching the MFP configuration
requested to be applied with the configuration
returned in the acknowledgement as having been applied
to the radio interface. The controller also
generates this notification to indicate that
configuration mismatch is cleared when the
values of cLMfpProtectionEnable and
cLMfpApIfMfpProtectionActual are found to be the
same.
This notification is generated by the controller
only if MFP has been configured as the protection
mechanism through cLMfpProtectType.
Context
- MIB
- CISCO-LWAPP-MFP-MIB
- OID
.1.3.6.1.4.1.9.9.518.0.1- Type
- notification
- Status
- current
- Parent
- ciscoLwappMfpMIBNotifs
- Siblings
- 4
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoLwappMfpValidationConfigMismatch This notification is sent by the agent when the
controller detects that the AP couldn't configure
itself with the MFP signature validation
configuration. The controller detects … | notification | - | .1.3.6.1.4.1.9.9.518.0.2 |
| ciscoLwappMfpTimebaseStatus This notification is sent by the agent to indicate
the controller's status of synchronization of its
timebase with that of a central timebase. The
notification is sent once after… | notification | - | .1.3.6.1.4.1.9.9.518.0.3 |
| ciscoLwappMfpAnomalyDetected deprecated This notification is sent by the agent when the
MFP configuration of the WLAN was violated by the
radio interface cLApIfSmtDot11Bssid and detected by
the radio interface cLApDot… | notification | - | .1.3.6.1.4.1.9.9.518.0.4 |
| ciscoLwappMfpAnomalyDetected1 This notification is sent by the agent when the
MFP configuration of the WLAN was violated by the
radio interface cLApIfSmtDot11Bssid and detected by
the radio interface cLApDot… | notification | - | .1.3.6.1.4.1.9.9.518.0.5 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLApMacAddress This object represents the radio MAC address
of a LWAPP AP. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.518.1.1 |
| cLApDot11IfSlotIdx This object represents the slotId of the dot11
interface. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.518.1.2 |
| cLWlanIdx This object represents the identifier for a
WLAN. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.518.1.3 |
| cLMfpProtectionEnable deprecated This object specifies whether the MFP protection
on this WLAN be enabled or not.
A value of 'true' enables management frame
protection on the WLAN and 'false' disab… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.518.2.1.2.1.3 |
| cLMfpApIfMfpProtectionActual This object represents the actual protection
configuration for a specific WLAN as applicable
to a dot11 interface of a specific AP. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.518.1.4 |
| CISCO-LWAPP-AP-MIBcLApName This object specifies the administrative name
assigned to the AP by the user. If an AP is not configured,
its factory default name will be ap:<last three byte
of MACAddress> eg.… | column | OctetString | .1.3.6.1.4.1.9.9.513.1.1.1.1.5 |