cLIpv6AclRuleProtocol

CISCO-LWAPP-IPV6-MIB · .1.3.6.1.4.1.9.9.847.1.1.2.1.10
MIB view Table view

Object

column r/w Unsigned32 
This object specifies protocol of the packet. It can 
be either of the pre specified protocols like TCP, UDP, 
ICMP, ESP, AH, GRE,IP, ethernet over IP, OSPF or any 
number between 0 and 255. A value 256 implies that this 
rule applies to 'Any' protocol.

Context

MIB
CISCO-LWAPP-IPV6-MIB
OID
.1.3.6.1.4.1.9.9.847.1.1.2.1.10
Type
column
Access
readwrite
Status
current
Parent
cLIpv6AclRuleEntry
Table
cLIpv6AclRuleTable
Siblings
17

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-256

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cLIpv6AclRuleIndex
This object represents a unique ACL rule. This can be updated by using cLIpv6AclNewRuleIndex to reset the sequence of the rules of an ACL.
columnUnsigned32.1.3.6.1.4.1.9.9.847.1.1.2.1.1
cLIpv6AclRuleStartSourcePort
This object specifies the start source port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.9.9.847.1.1.2.1.11
cLIpv6AclRuleEndSourcePort
This object specifies the end Source Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.9.9.847.1.1.2.1.12
cLIpv6AclRuleStartDestinationPort
This object specifies the start Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.9.9.847.1.1.2.1.13
cLIpv6AclRuleEndDestinationPort
This object specifies the End Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.9.9.847.1.1.2.1.14
cLIpv6AclRuleDscp
This object specifies the DSCP value of the rule. A value 256 implies Any.
columnUnsigned32.1.3.6.1.4.1.9.9.847.1.1.2.1.15
cLIpv6AclNewRuleIndex
This object specifies the new Index of the ACL rule. This object should be updated if the requirement is to reset the sequence of the rules of an ACL.
columnUnsigned32.1.3.6.1.4.1.9.9.847.1.1.2.1.16
cLIpv6AclRuleHits
This object specifies the number of hits in the particular rule under the ACL. This object is cleared by setting the cLIpv6AclCounterClear object.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.9.9.847.1.1.2.1.17
cLIpv6AclRuleRowStatus
This is the status column for this row and is used to create and delete specific instances of rows in this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.847.1.1.2.1.18
cLIpv6AclRuleAction
This object specifies the permission mode of a rule. A value of deny(0) indicates that, rule is to be denied. A value of permit(1) indicates that, rule is to be permit.
columnEnumeration.1.3.6.1.4.1.9.9.847.1.1.2.1.2
cLIpv6AclRuleDirection
This object specifies the direction of the packet to which the rule would be applied. A value of inbound(1) indicates that, rule is applied to inbound packets A value of outboun…
columnEnumeration.1.3.6.1.4.1.9.9.847.1.1.2.1.3
cLIpv6AclRuleSourceInetAddressType
This object specifies the type of the source IP address of the ACL rule.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.847.1.1.2.1.4
cLIpv6AclRuleSourceInetAddress
This object specifies the source IP address of the ACL rule.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.847.1.1.2.1.5
cLIpv6AclRuleSourcePrefixLength
This object specifies the prefix length for source IP address of the ACL rule.
columnUnsigned32.1.3.6.1.4.1.9.9.847.1.1.2.1.6
cLIpv6AclRuleDestinationInetAddressType
This object specifies the type of the destination IP address of the ACL rule.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.847.1.1.2.1.7
cLIpv6AclRuleDestinationInetAddress
This object specifies the destination IP address of the ACL rule.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.847.1.1.2.1.8
cLIpv6AclRuleDestinationPrefixLength
This object specifies the prefix length for destination IP address of the ACL rule.
columnUnsigned32.1.3.6.1.4.1.9.9.847.1.1.2.1.9