cLIpv6AclRuleEndDestinationPort
CISCO-LWAPP-IPV6-MIB ·
.1.3.6.1.4.1.9.9.847.1.1.2.1.14
Object
This object specifies the End Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535.
Context
- MIB
- CISCO-LWAPP-IPV6-MIB
- OID
.1.3.6.1.4.1.9.9.847.1.1.2.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cLIpv6AclRuleEntry
- Table
- cLIpv6AclRuleTable
- Siblings
- 17
Syntax
INET-ADDRESS-MIBInetPortNumber
- Source
- INET-ADDRESS-MIBInetPortNumber
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLIpv6AclRuleIndex This object represents a unique ACL rule. This can be
updated by using cLIpv6AclNewRuleIndex to reset the sequence
of the rules of an ACL. | column | Unsigned32 | .1.3.6.1.4.1.9.9.847.1.1.2.1.1 |
| cLIpv6AclRuleProtocol This object specifies protocol of the packet. It can
be either of the pre specified protocols like TCP, UDP,
ICMP, ESP, AH, GRE,IP, ethernet over IP, OSPF or any
number between… | column | Unsigned32 | .1.3.6.1.4.1.9.9.847.1.1.2.1.10 |
| cLIpv6AclRuleStartSourcePort This object specifies the start source port of the
packet. It can be either of the pre specified ports
like HTTP, HTTPS, Telnet, RADIUS etc or any number
between 0 and 65535. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.847.1.1.2.1.11 |
| cLIpv6AclRuleEndSourcePort This object specifies the end Source Port of the packet.
It can be either of the pre specified ports like HTTP,
HTTPS, Telnet, RADIUS etc or any number between 0 and
65535. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.847.1.1.2.1.12 |
| cLIpv6AclRuleStartDestinationPort This object specifies the start Destination Port of the
packet. It can be either of the pre specified ports like HTTP,
HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.847.1.1.2.1.13 |
| cLIpv6AclRuleDscp This object specifies the DSCP value of the rule.
A value 256 implies Any. | column | Unsigned32 | .1.3.6.1.4.1.9.9.847.1.1.2.1.15 |
| cLIpv6AclNewRuleIndex This object specifies the new Index of the ACL rule. This
object should be updated if the requirement is to reset the
sequence of the rules of an ACL. | column | Unsigned32 | .1.3.6.1.4.1.9.9.847.1.1.2.1.16 |
| cLIpv6AclRuleHits This object specifies the number of hits in the particular
rule under the ACL. This object is cleared by setting the
cLIpv6AclCounterClear object. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.847.1.1.2.1.17 |
| cLIpv6AclRuleRowStatus This is the status column for this row and is used to create
and delete specific instances of rows in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.847.1.1.2.1.18 |
| cLIpv6AclRuleAction This object specifies the permission mode of a rule.
A value of deny(0) indicates that, rule is to be
denied.
A value of permit(1) indicates that, rule is to be
permit. | column | Enumeration | .1.3.6.1.4.1.9.9.847.1.1.2.1.2 |
| cLIpv6AclRuleDirection This object specifies the direction of the packet to which
the rule would be applied.
A value of inbound(1) indicates that, rule is applied to
inbound packets
A value of outboun… | column | Enumeration | .1.3.6.1.4.1.9.9.847.1.1.2.1.3 |
| cLIpv6AclRuleSourceInetAddressType This object specifies the type of the source IP address of the
ACL rule. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.847.1.1.2.1.4 |
| cLIpv6AclRuleSourceInetAddress This object specifies the source IP address of the ACL rule. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.847.1.1.2.1.5 |
| cLIpv6AclRuleSourcePrefixLength This object specifies the prefix length for source
IP address of the ACL rule. | column | Unsigned32 | .1.3.6.1.4.1.9.9.847.1.1.2.1.6 |
| cLIpv6AclRuleDestinationInetAddressType This object specifies the type of the destination IP address of
the ACL rule. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.847.1.1.2.1.7 |
| cLIpv6AclRuleDestinationInetAddress This object specifies the destination IP address of the ACL
rule. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.847.1.1.2.1.8 |
| cLIpv6AclRuleDestinationPrefixLength This object specifies the prefix length for destination
IP address of the ACL rule. | column | Unsigned32 | .1.3.6.1.4.1.9.9.847.1.1.2.1.9 |