clcrDot11bHysteresis
CISCO-LWAPP-CLIENT-ROAMING-MIB ·
.1.3.6.1.4.1.9.9.523.1.2.3
Object
scalar
deprecated
r/w
dB Integer32
This object specifies how much stronger the signal
strength (dB) of a neighbor AP must be, in order
for the client to roam to it. The use of roaming
hysteresis is intended to reduce the amount of
clients roaming back and forth between BSSs if the
client is physically located on or near the border
between two BSSs.
This object is superceded by clcrDot11bHysteresisV2
clcrDot11bHysteresis object is superseded by clcrDot11bHysteresisV2.
Context
- MIB
- CISCO-LWAPP-CLIENT-ROAMING-MIB
- OID
.1.3.6.1.4.1.9.9.523.1.2.3- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Units
- dB
- Parent
- clcrRoamDot11bRfParamConfig
- Siblings
- 8
Syntax
dB Integer32
Values & Constraints
Object Constraints
range: 2-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clcrDot11bMode This object specifies how the controller chooses
the values of the RF parameters needed to manage
roaming in 802.11b/g networks. | scalar | CISCO-LWAPP-TC-MIBCLDot11RfParamMode | .1.3.6.1.4.1.9.9.523.1.2.1 |
| clcrDot11bMinRssi deprecated This object specifies the minimum Received Signal
Strength Indication (RSSI) in dBm required to
associate with the AP. It also defines the edge of
coverage for the BSS. If the cli… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.523.1.2.2 |
| clcrDot11bAdaptiveScanThreshold deprecated This object specifies the threshold for the
strength of the signals received(RSSI) from an AP,
as seen by an associated client, below which the
client must be able to roam to a ne… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.523.1.2.4 |
| clcrDot11bTransitionTime deprecated This object specifies the maximum time duration
permitted for the client to detect a suitable
neighbor AP to roam to and to complete the roam,
whenever the RSSI from the client is… | scalar | Integer32 | .1.3.6.1.4.1.9.9.523.1.2.5 |
| clcrDot11bMinRssiV2 This object specifies the minimum Received Signal
Strength Indication (RSSI) in dBm required to
associate with the AP. It also defines the edge of
coverage for the BSS. If the cli… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.523.1.2.6 |
| clcrDot11bHysteresisV2 This object specifies how much stronger the signal
strength (dB) of a neighbor AP must be, in order
for the client to roam to it. The use of roaming
hysteresis is intended to red… | scalar | dB Integer32 | .1.3.6.1.4.1.9.9.523.1.2.7 |
| clcrDot11bAdaptiveScanThresholdV2 This object specifies the threshold for the
strength of the signals received(RSSI) from an AP,
as seen by an associated client, below which the
client must be able to roam to a ne… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.523.1.2.8 |
| clcrDot11bTransitionTimeV2 This object specifies the maximum time duration
permitted for the client to detect a suitable
neighbor AP to roam to and to complete the roam,
whenever the RSSI from the client is… | scalar | Integer32 | .1.3.6.1.4.1.9.9.523.1.2.9 |