claTacacsFallbackTestInterval
CISCO-LWAPP-AAA-MIB ·
.1.3.6.1.4.1.9.9.598.1.1.27
Object
This object specifies the TACACS Fallback Test Interval in seconds.
Context
- MIB
- CISCO-LWAPP-AAA-MIB
- OID
.1.3.6.1.4.1.9.9.598.1.1.27- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- claConfigObjects
- Siblings
- 26
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| claPriorityTable This table contains entries for AAA authentication
methods configured in the controller. At startup,
all the entries in this table are set up by the central
controller. A mana… | table | - | .1.3.6.1.4.1.9.9.598.1.1.1 |
| claWebRadiusAuthentication This object specifies to configure the Web RADIUS Authentication
parameters on the WLC.
PAP (1) - Configure Web RADIUS Authentication in PAP mode.
CHAP (2) - Configure Web RADIU… | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.10 |
| claRadiusFallbackMode This object specifies to configure the RADIUS Fallback Test mode
on the WLC. Following are the configurable options:-
off (1) - Disables RADIUS server fallback test.
passive (2) … | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.11 |
| claRadiusFallbackUsername This object specifies to configure the RADIUS Fallback Test.
username to be sent in dead server probes | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.598.1.1.12 |
| claRadiusFallbackInterval This object specifies to configure the probe interval (when
claRadiusFallbackMode is in active mode) or inactive time
(when claRadiusFallbackMode is in passive mode) | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.598.1.1.13 |
| claRadiusAuthMacDelimiter This object specifies the delimiter to be used for RADIUS authentication servers.
The possible values allowed are -
no delimiter (0) - as in xxxxxxxxxxxx.
colon (1) - as… | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.14 |
| claRadiusAcctMacDelimiter This object specifies the delimiter to be used for RADIUS accounting servers.
The possible values allowed are -
no delimiter (0) - as in xxxxxxxxxxxx.
colon (1) - as in… | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.15 |
| claAcceptMICertificate This object specifies if controller will accept
Manufactured Installed Certificate from the
access points as part of authorization.
A value of 'true' indicates that the c… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.16 |
| claAcceptLSCertificate This object specifies if controller will accept
Local Significant Certificate from access points
as part of authorization.
A value of 'true' indicates that the controller w… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.17 |
| claAllowAuthorizeLscApAgainstAAA This object specifies if access points to be authorized
using a AAA RADIUS server or local database.
A value of 'true' indicates that the access points would be
authorized… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.18 |
| claSscHashValidationEnabled This object specifies if the SSC Hash
Validation is configured on the controller.
If true, then SSC Hash Validation is enabled.
If false, then SSC Hash validation is disabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.19 |
| claTacacsServerTable This table represents the information about configuring
the Accounting, Authentication and Authorization servers.
The creation of a new row in claTacacsServerTable is
through an … | table | - | .1.3.6.1.4.1.9.9.598.1.1.2 |
| claSscCertificateSubject This object indicates the SSC Certificate
subject value of the controller. | scalar | OctetString | .1.3.6.1.4.1.9.9.598.1.1.20 |
| claSscCertificateValidity This object indicates the SSC Certificate
validity value of the controller. | scalar | OctetString | .1.3.6.1.4.1.9.9.598.1.1.21 |
| claSscCertificateHashKey This object indicates the SSC Certificate
hash key value of the controller. | scalar | OctetString | .1.3.6.1.4.1.9.9.598.1.1.22 |
| claRadiusAuthServerTable This table represents the conceptual listing the RADIUS authentication
servers with which the client shares a secret. | table | - | .1.3.6.1.4.1.9.9.598.1.1.23 |
| claRadiusAccServerTable This table represents the conceptual table listing the RADIUS accounting
servers with which the client shares a secret. | table | - | .1.3.6.1.4.1.9.9.598.1.1.24 |
| claRadiusAuthServerRealmTable This table represents the conceptual table listing the RADIUS authentication
servers with realm config. | table | - | .1.3.6.1.4.1.9.9.598.1.1.25 |
| claRadiusAcctServerRealmTable This table represents the conceptual table listing the RADIUS accounting
servers with which the client shares a realm. | table | - | .1.3.6.1.4.1.9.9.598.1.1.26 |
| claWlanTable AAA table corresponding to a WLAN. When WLAN is added a
new entry gets added to this table. The entry is removed
when the WLAN is removed. | table | - | .1.3.6.1.4.1.9.9.598.1.1.3 |
| claRadiusServerGlobalActivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerGlobalActivated
notification.
A value of 'true' indicates that the agent generates
ciscoLwap… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.4 |
| claRadiusServerGlobalDeactivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerGlobalDeactivated
notification.
A value of 'true' indicates that the agent generates
ciscoLw… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.5 |
| claRadiusServerWlanActivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerWlanActivated
notification.
A value of 'true' indicates that the agent generates
ciscoLwappA… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.6 |
| claRadiusServerWlanDeactivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerWlanDeactivated
notification.
A value of 'true' indicates that the agent generates
ciscoLwap… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.7 |
| claRadiusReqTimedOutEnabled The object specifies to control the generation of
ciscoLwappAAARadiusReqTimedOut notification.
A value of 'true' indicates that the agent generates
ciscoLwappAAARadiusR… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.8 |
| claSaveUserData This object specifies to save the guest user config to NVRAM.
A value of 'true' indicates that the data is saved.
A value of 'false' indicates the data is not saved. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.9 |