claSscHashValidationEnabled
CISCO-LWAPP-AAA-MIB ·
.1.3.6.1.4.1.9.9.598.1.1.19
Object
This object specifies if the SSC Hash Validation is configured on the controller. If true, then SSC Hash Validation is enabled. If false, then SSC Hash validation is disabled.
Context
- MIB
- CISCO-LWAPP-AAA-MIB
- OID
.1.3.6.1.4.1.9.9.598.1.1.19- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- claConfigObjects
- Siblings
- 26
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| claPriorityTable This table contains entries for AAA authentication
methods configured in the controller. At startup,
all the entries in this table are set up by the central
controller. A mana… | table | - | .1.3.6.1.4.1.9.9.598.1.1.1 |
| claWebRadiusAuthentication This object specifies to configure the Web RADIUS Authentication
parameters on the WLC.
PAP (1) - Configure Web RADIUS Authentication in PAP mode.
CHAP (2) - Configure Web RADIU… | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.10 |
| claRadiusFallbackMode This object specifies to configure the RADIUS Fallback Test mode
on the WLC. Following are the configurable options:-
off (1) - Disables RADIUS server fallback test.
passive (2) … | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.11 |
| claRadiusFallbackUsername This object specifies to configure the RADIUS Fallback Test.
username to be sent in dead server probes | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.598.1.1.12 |
| claRadiusFallbackInterval This object specifies to configure the probe interval (when
claRadiusFallbackMode is in active mode) or inactive time
(when claRadiusFallbackMode is in passive mode) | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.598.1.1.13 |
| claRadiusAuthMacDelimiter This object specifies the delimiter to be used for RADIUS authentication servers.
The possible values allowed are -
no delimiter (0) - as in xxxxxxxxxxxx.
colon (1) - as… | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.14 |
| claRadiusAcctMacDelimiter This object specifies the delimiter to be used for RADIUS accounting servers.
The possible values allowed are -
no delimiter (0) - as in xxxxxxxxxxxx.
colon (1) - as in… | scalar | Enumeration | .1.3.6.1.4.1.9.9.598.1.1.15 |
| claAcceptMICertificate This object specifies if controller will accept
Manufactured Installed Certificate from the
access points as part of authorization.
A value of 'true' indicates that the c… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.16 |
| claAcceptLSCertificate This object specifies if controller will accept
Local Significant Certificate from access points
as part of authorization.
A value of 'true' indicates that the controller w… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.17 |
| claAllowAuthorizeLscApAgainstAAA This object specifies if access points to be authorized
using a AAA RADIUS server or local database.
A value of 'true' indicates that the access points would be
authorized… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.18 |
| claTacacsServerTable This table represents the information about configuring
the Accounting, Authentication and Authorization servers.
The creation of a new row in claTacacsServerTable is
through an … | table | - | .1.3.6.1.4.1.9.9.598.1.1.2 |
| claSscCertificateSubject This object indicates the SSC Certificate
subject value of the controller. | scalar | OctetString | .1.3.6.1.4.1.9.9.598.1.1.20 |
| claSscCertificateValidity This object indicates the SSC Certificate
validity value of the controller. | scalar | OctetString | .1.3.6.1.4.1.9.9.598.1.1.21 |
| claSscCertificateHashKey This object indicates the SSC Certificate
hash key value of the controller. | scalar | OctetString | .1.3.6.1.4.1.9.9.598.1.1.22 |
| claRadiusAuthServerTable This table represents the conceptual listing the RADIUS authentication
servers with which the client shares a secret. | table | - | .1.3.6.1.4.1.9.9.598.1.1.23 |
| claRadiusAccServerTable This table represents the conceptual table listing the RADIUS accounting
servers with which the client shares a secret. | table | - | .1.3.6.1.4.1.9.9.598.1.1.24 |
| claRadiusAuthServerRealmTable This table represents the conceptual table listing the RADIUS authentication
servers with realm config. | table | - | .1.3.6.1.4.1.9.9.598.1.1.25 |
| claRadiusAcctServerRealmTable This table represents the conceptual table listing the RADIUS accounting
servers with which the client shares a realm. | table | - | .1.3.6.1.4.1.9.9.598.1.1.26 |
| claTacacsFallbackTestInterval This object specifies the TACACS Fallback Test Interval
in seconds. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.598.1.1.27 |
| claWlanTable AAA table corresponding to a WLAN. When WLAN is added a
new entry gets added to this table. The entry is removed
when the WLAN is removed. | table | - | .1.3.6.1.4.1.9.9.598.1.1.3 |
| claRadiusServerGlobalActivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerGlobalActivated
notification.
A value of 'true' indicates that the agent generates
ciscoLwap… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.4 |
| claRadiusServerGlobalDeactivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerGlobalDeactivated
notification.
A value of 'true' indicates that the agent generates
ciscoLw… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.5 |
| claRadiusServerWlanActivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerWlanActivated
notification.
A value of 'true' indicates that the agent generates
ciscoLwappA… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.6 |
| claRadiusServerWlanDeactivatedEnabled The object specifies to control the generation of
ciscoLwappAAARadiusServerWlanDeactivated
notification.
A value of 'true' indicates that the agent generates
ciscoLwap… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.7 |
| claRadiusReqTimedOutEnabled The object specifies to control the generation of
ciscoLwappAAARadiusReqTimedOut notification.
A value of 'true' indicates that the agent generates
ciscoLwappAAARadiusR… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.8 |
| claSaveUserData This object specifies to save the guest user config to NVRAM.
A value of 'true' indicates that the data is saved.
A value of 'false' indicates the data is not saved. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.598.1.1.9 |