lesLecsAtmAddr

CISCO-LES-MIB · .1.3.6.1.4.1.9.9.39.1.1.1.1.15

Object

column r/w LAN-EMULATION-CLIENT-MIBAtmLaneAddress

The  ATM address  associated with  the LECS  used by
this LES. If no  LECS is in use  by the LES  then this
object will have the value of all 0's (i.e 0x0000...).
If it is  desired that the LES get  the address of the
LECS  through the ILMI  then this  object may be  left
unspecified at row activation.  If the ILMI fails then
the lesOperStatus will  be inactive(2) and this column
still not present.

Context

MIB: CISCO-LES-MIB
OID: .1.3.6.1.4.1.9.9.39.1.1.1.1.15
Type: column
Access: readwrite
Status: current
Parent: lesEntry
Table: lesTable
Siblings: 20

Syntax

LAN-EMULATION-CLIENT-MIBAtmLaneAddress

Source: LAN-EMULATION-CLIENT-MIBAtmLaneAddress
Base type: OctetString

Values & Constraints

Type Constraints

range: 0 range: 20

Related Objects

Sibling Objects

Object	Type	Syntax	OID
lesElanName The name associated with the emulated LAN which this LES services.	column	OctetString	`.1.3.6.1.4.1.9.9.39.1.1.1.1.1`
lesColocBusAtmAddrActl The ATM address in use by the BUS. This object is a product of the specified ATM address, its mask and interaction with the switch through the ILMI.	column	LAN-EMULATION-CLIENT-MIBAtmLaneAddress	`.1.3.6.1.4.1.9.9.39.1.1.1.1.10`
lesUpTime The value of sysUpTime when this LES became activated.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.9.39.1.1.1.1.11`
lesLanType The type of legacy LAN that this LES emulates.	column	Enumeration	`.1.3.6.1.4.1.9.9.39.1.1.1.1.12`
lesMaxFrm The maximum frame size that the specified LAN type can accept.	column	Enumeration	`.1.3.6.1.4.1.9.9.39.1.1.1.1.13`
lesJoinTimeout The number of seconds that must elapse before a Join request can be timed-out.	column	seconds Integer32	`.1.3.6.1.4.1.9.9.39.1.1.1.1.14`
lesControlDistVpi The virtual path identifier of the control distribute VCC to all clients, if it exits.	column	CISCO-BUS-MIBCiscoVpiInteger	`.1.3.6.1.4.1.9.9.39.1.1.1.1.16`
lesControlDistVci The virtual channel identifier of the control distribute VCC to all clients, if it exists.	column	CISCO-BUS-MIBCiscoVciInteger	`.1.3.6.1.4.1.9.9.39.1.1.1.1.17`
lesOperStatus This object reflects the actual state of the LES which may differ from that of the lesAdminStatus object. This can occur when the interface ifOperStatus is…	column	Enumeration	`.1.3.6.1.4.1.9.9.39.1.1.1.1.18`
lesAdminStatus The desired state of the designated LES as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state bei…	column	Enumeration	`.1.3.6.1.4.1.9.9.39.1.1.1.1.19`
lesIndex A unique identifier for this LES servicing this ELAN. This value must remain constant while the entry is in existence and during the operation of the agent (i.e. It is al…	column	Integer32	`.1.3.6.1.4.1.9.9.39.1.1.1.1.2`
lesStatus The status of this entry (conceptual row). This row cannot be set to active until an appropiate value of lesIfIndex has been specified.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.39.1.1.1.1.20`
lesSegmentID The segment ID of the emulated LAN this LES is servicing. This object is only valid if the lesLanType is dot5(2).	column	Integer32	`.1.3.6.1.4.1.9.9.39.1.1.1.1.21`
lesAtmAddrSpec The ATM address of the designated LES. Note that setting this object will have the side effect of reinitializing the LES and consequently dropping all clients connecte…	column	LAN-EMULATION-CLIENT-MIBAtmLaneAddress	`.1.3.6.1.4.1.9.9.39.1.1.1.1.3`
lesAtmAddrMask An address mask that when used with the lesAtmAddrSpec specifies the portion of the LES' ATM address that is desired to be configured. Note that setting this …	column	OctetString	`.1.3.6.1.4.1.9.9.39.1.1.1.1.4`
lesAtmAddrActual The resultant ATM address in use by the LES. This object is a product of the specified ATM address, mask and interaction with the switch via the ILMI.	column	LAN-EMULATION-CLIENT-MIBAtmLaneAddress	`.1.3.6.1.4.1.9.9.39.1.1.1.1.5`
lesIfIndex The interface that a LES will receive control connections on. The value specified for this object must equate to a value of ifIndex in the ifTable. The interface will be for tha…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.39.1.1.1.1.6`
lesSubIfNum Specifies the sub-interface number that the LES will reside on. This sub-interface may be shared with a LEC or BUS of the same ELAN but is not required to do so. If no v…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.39.1.1.1.1.7`
lesColocBusAtmAddrSpec For those implementations who do not allow the separate creation/deletion of the LES and BUS this object allows the operator to specify the ATM address of the BUS at L…	column	LAN-EMULATION-CLIENT-MIBAtmLaneAddress	`.1.3.6.1.4.1.9.9.39.1.1.1.1.8`
lesColocBusAtmAddrMask An address mask that when used with the lesColocatedBusAtmAddr specifies the portion of the BUS' ATM address desired by management. Note that setting this obj…	column	OctetString	`.1.3.6.1.4.1.9.9.39.1.1.1.1.9`